Love the way you keep petting the dog while doing the pull too reassure him it’s all good cause you know he doesn’t really like it too much atm what a good man💯💪🏼
You don’t need a scanner to bleed the ayc. Someone created a program to bleed the ayc and acd. When you download the new version of evoscan they include that program with the downloads.
Devin, you rock, and trust me, Piston will be the one teacher you’ll recognize you’ve missed! I truly enjoy seeing this little,fella,teaching you, w/o you knowing! Keep rocking!
Filler plug, see I have you to show me what not to do my guy! Keep the content coming! You deserve all the cars and success! Love to see you do an S15one day
I enjoy seeing Piston in the video. Also I don't know why it would grind but then again if it's only to reverse it's fine. And when you moved forward a bit, it didn't do it. So maybe it just has to be broken in or something idk.
I always make sure to put my evo x into first before going to reverse, I noticed it always wanted to grind if I just put it straight into reverse and never grinds when I put it into first
Reusing the old synchros is like reusing old rod bearings with new rods in a Subaru engine You CAN do it. But what does 2 full days of labor to R&R a trans cost
You should take a look at the Active 2.0 pressure washer. It’s a ceramic 5 piston design and moves a lot of water. With a small shelf and a reel you would have a superior setup for washing those beautiful cars and clean all your parts. It’s painful to watch you use that low performance piece of low end consumer gear. So many nice cars, good tools but the pressure washer is just poor.
Thats my clutch too. I have one in my built evo x. I have 6870 too and im taking that shit out and go back to my 6466. Full boost comes in at 6k..booo.
Why didn’t you just bring the jack over to the trans 😂 instead of carrying it to the jack. My guy I’m almost 30 and I gotta say you gotta start watching out for your body.
Love the way you keep petting the dog while doing the pull too reassure him it’s all good cause you know he doesn’t really like it too much atm what a good man💯💪🏼
Man I really love how you care Piston and see him ride with you.❤
Good job once again. I like that you did not edit out the oil dripping on you.
You don’t need a scanner to bleed the ayc. Someone created a program to bleed the ayc and acd. When you download the new version of evoscan they include that program with the downloads.
Always loved how thorough Devin is in his videos. Absolutely love that of him
Hey Devin, will you ever buy an Evo IX wagon. I haven't see a youtuber build one, and that would be a great addition to your EVO fleet.
How about speed academy. They have one.
We didn’t get them in the states. Motion auto tv built one using a lancer wagon and a Evo IX. check it out. Very intrusive build.
Trevor from motion auto tv converted one. From a lancer wagon and did a series on it
@@ZacharyMwaura-x6lYeah but it's more like oem plus and it's an automatic
I absolutely agree with this. Its time to hit 1 million subs my evo guy 😎
cant wait to see this bad boy on the track. your knowledge of these amazing vehicles and the performance parts you add is always cool to watch!
Hey Devin, love the videos. This EVO still my favorite. What you think about making a Piston t-shirt?
Devin, you rock, and trust me, Piston will be the one teacher you’ll recognize you’ve missed! I truly enjoy seeing this little,fella,teaching you, w/o you knowing! Keep rocking!
C'mon devin, work smarter not harder. Wheel the trans jack to the transmission 🤣🤣🤣. Especially if you're back is messed up.
Hope to see more videos on the EM as well
Filler plug, see I have you to show me what not to do my guy! Keep the content coming! You deserve all the cars and success! Love to see you do an S15one day
At this point every new video title, or the channel itself could be titled "We Have an Issue" 🥰
Yeah, he should work for Boeing
What altel scanner do you use to bleed the AYC? Also do you have to open the bleeders before using the scanner ? A link would be amazing
Remember a video you said the transmission in the duramax was slipping what happened to that problem?
It couldn't hold the power from the tuner he had in it. He just put the regular map back on it iirc and it was fine
What rear window visor is that? looks sick
Bro the evo needs a good ol restore man she is the og car it needs love
Full restore on the evo 10
Devin is that a cane corso ? I am getting one and look exactly as piston
I enjoy seeing Piston in the video. Also I don't know why it would grind but then again if it's only to reverse it's fine. And when you moved forward a bit, it didn't do it. So maybe it just has to be broken in or something idk.
took a bite of my pie and heard "well now im 30 i hurt my back in my sleep" i choked. i feel you bro!
I love the reset here but I do wonder...how are you Dev?
Am i the only one who wants him to do an evo x to the same spec as he did the yellow evo? As far a build quality goes.
I always make sure to put my evo x into first before going to reverse, I noticed it always wanted to grind if I just put it straight into reverse and never grinds when I put it into first
Loving these vids. So educational
Hands up, Am I the only one who is hoping to see Devin build a circuit EVO?
Are those 16 inch wheels??
I’m looking forward to some track racing. I was only thinking the other day how come u never take any of ur cars to the track
oh my goodness. what kind of dog is that?? he is so cute
Reusing the old synchros is like reusing old rod bearings with new rods in a Subaru engine
You CAN do it. But what does 2 full days of labor to R&R a trans cost
What will you do once piston is fully grown? He is going to be huge
Miss this car on the channel ‼️🫶🏾
Funny how there's wheels on that Transmission Jack
I remember when you tuned the truck, it definitely had a problem then.
You should take a look at the Active 2.0 pressure washer. It’s a ceramic 5 piston design and moves a lot of water. With a small shelf and a reel you would have a superior setup for washing those beautiful cars and clean all your parts. It’s painful to watch you use that low performance piece of low end consumer gear. So many nice cars, good tools but the pressure washer is just poor.
"well that didnt grind before" 🤣
How do you bleed it without having to crack the bleeder screw?
wish the SST was that easy to service
Love the dogs name!
Listen up guys. Go hawks. 🏈
look at RAC turbo Devin!
The evo needs a black headliner
Make these contests available for us in Canada too 🇨🇦
Which Autel do you have
Your videos are always a high standard of quality on RUclips. Thank you for your work!🏹😎🚴
we got oiled up devin before gta 6
11:37 did piston fart?
Wish i could enter
To be fair you could of rolled the jack to the transmission and then rolled it back to the car lol
Man that whole quart of gear oil ended up on ur shirt! 🥴
well deserved Like for not putting in the fill plug haha
Please build a gtr next 🙏💪
ice blaster
Thats my clutch too. I have one in my built evo x. I have 6870 too and im taking that shit out and go back to my 6466. Full boost comes in at 6k..booo.
I like your jobs, I need you in Florida.
❤VASYN❤
Hell yeah
These bots. Lmao
Yes sirrr ❤
👌👌👌
Do you wanna buy my house and flip it Dev ??
I wanna win an EVO X. 🥺😭
Why didn’t you just bring the jack over to the trans 😂 instead of carrying it to the jack. My guy I’m almost 30 and I gotta say you gotta start watching out for your body.
Let's go
Where the fk8 at??
*FIRST*
LET'S DO THISSSS
😎😎😎😎
🙄🥱
@@bestcrazyboy8487 who
Ur still young I'm 36 lol😂
Do you know that seatbelts for dogs exist...?
No way! Really? Never would have thought🙄
🇵🇷
First!!!❤🔥
#1
just enter the bro name daniel hutchinson