Cadillac V6 SRX-CTS-STS Spark Plugs removal
HTML-код
- Опубликовано: 8 сен 2024
- This particular Cadillac is a 2006 SRX but the Procedure is the same for other models V6's CTS & STS and its the same and intake has to be removed
Hope it help some one out there. Dont forget to SUB!!!
Follow me on INSTAGRAM
/ falcons_hobbies
Twitter.
/ shospeed
Facebooks Hobbies
/ falconshobbies
My Gaming Channel.
/ @falconsgaming
DISCLAIMER:
Try this procedure at your own risk, and by no means I'm I responsible for possible Stripped heads, Broken bolts,broken hoses or gaskets, because of improper installation or broken parts etc, proceed at own risk.
Garage wanted $700.00+ to do this. I spent about $125.00 in parts. EXCELLENT video... If I can find a video that is less than 8 minutes long to do something... then I am trying. Perfect! Very thankful!
Glad it helped
Nice video bro, you explained a lot of things that other people don't like how to unclip plugs, size of bolts, etc. Anyone wanting to know how to re-plug your Caddie this is the best video for information...
Thanks for watching and the feedback!
This might be old but I just used the video today. Thank you so much for saving me so much money in labor and fees and time.
Ziren Hair glad I could help
@@FalconsGarage p
@@FalconsGarage p9o0⁰p 9j69990po l
U 8.y79
p
Thank you for making this video short, to the point, and edited out all the unnecessary turning the wrench
lol .. some people complain that i don't show that sometimes .. lol
Thank you, thank you, thank you. I am a true diy lady and your video really helped me. Today I installed a purge valve but did not take the engine cover all the way off because I wasn't sure about that bar that runs across the cover. Now I know that I can remove it fully just by removing those bolts.
I had the same question.
I changed the spark plugs in my SRX watching only this video. you are a life saver. was back on the road in a little over an hour! thank you!
Glad I could help!
An hour? You are a stud....
I would not have attempted this but watched your vid and got the nerve and did it. Now I think I’m a pro.... thanks for taking the time to share....😬
Muy excellente, Señor Falcon. I’m 76 and this video gives me confidence I can do this as easily as working on my 1955 Chevy Bel Air 265 c.i. V8 in high school. Ain’t RUclips grand? Thank you!
You can do it!
Exactly what I needed. Thank you, Sir.
Glad i could help!
I’m going to attempt to replace my spark plugs this wkend. Wish me luck yall 🤞🏼
Good luck!
Thanks for the time to show us how to do it gracias amigo
de nada
I really appreciate the video that you have made so therefore I can actually use it to my advantage long story short I have got a Cadillac they told me it had low compression and it should not even be able to crank or shouldn't crank and I have it cranking and running but not rolling yet thanks for your info on your video it will help a lot on my journey on this car wish me luck and I appreciate all the info
I'm bout to do this today hopefully everything goes accordingly because I am not a mechanic but can fix some shit hell I've done a full pump shouldn't be no harder
hope it all went well .. just be patience
yeah they dont make it easy, IMO they make it so you have to take it to the dealer to get worked on.
Falcon's Garage For real, my old Volkswagen was a million times easier than this
So true! I'm stuck as I can't get the bolts off of the bar. Good to know it is an 18 MM bolt.
Thank-you very much
Welcome!
Good Description. Thanks
Nice work
That's exactly what I was looking for. I need to do a tune up on my 2006 Cadillac srx. I also need to change or clean the egr valve. Can you point out where it is located?
I believe on the back of the head .. not too sure
Thank you very helpful
Don't look to complicated I'm gonna give it a try
ITS NOT GOOD LUCK!
Excellent work 👍
Thank you for this video I got a srx from hell but this really showed me everything I needed to know thank u god bless
Glad it helped
Great video!!!!!!
Hey! Awesome video. Super helpful! One question though, are the cylinders counted 1-3-5 on the left from front to back and 2-4-6 on the right side?
yes.
ruclips.net/video/eQU3GelYNeY/видео.html
I'm assuming he took off all spark plugs and coils at the same time.
I've been doing some research ...between 2004-2007 the intake is ridiculously larger than 2008-2011....
Why do the replacement rings never freaking fit!!!
Great Video Thank you,
Thank you so much for this
I have 2009 Cadillac srx v6,did exactly as video and installed all new plugs and cop boots . after install suv ran beautiful, better than before.The next day I went out to start the vehicle it would not start,turned over but no start. I decided to verify if it was any problems defective plugs by replacing it out with putting the old ones back in,still the same no start. Does this make any sense? any ideas?
sounds weird, I would double check all the connectors for the fuel injectors and everything else, fuses relays etc
yeh I know it sounds weird,will do, right now raining today hopefully tomorrow will be clear weather to work on it.
Sehr gut gemacht, DANKE
yo falcon did you see where the ecm ground wire went? or can it go any where?
Thanks
What kond of Spark plug i need 0.40. 0.044. Or 0.050????
Great video man
I wrecked my 2011 STS 3.6 LLT so I went bought a 2008 CTS LY7 beautiful car with a blown engine...I was just gonna swap out the motor and transmission from the STS to the CTS.Will that work?
it might work .. not sure if they are exactly the same
If I have a bad coil how can I find out which one is bad?
Do you have a vid for this?...Thanks
if I had no way of testing it, I WOULD put that coil on another cylinder and if the misfire follows the coil then that coil is bad! same thing with the spark plug separate them and track were they went and were the misfire goes to.
Thanks for the tip FG.
Bill Hooker a computer diagnostic check can tell you what cylinder isn't firing right. Usually if one goes the rest aren't far behind, change them all. Kind of how you don't just change one side of your brakes.
Do they make a supercharger for 3.6
2008 CTS OR A TURBO
ive seen some, but they go for around 10k for the SC kit
When u unplugged your throttle body did u have 2 reprogram it or it do it on its own
There should be no need to reprogram it
@@FalconsGarage ok thanks
@@FalconsGarage the reason I asked bc I had 1 of the rear coil packs changed and the mechanic had said once he put everything pack together he had trouble starting the car in other words he claims that he had 2 use one of those expensive scan tools 2 reprogram the throttle body then the car started and stayed running like it should just asking bc I was thinking about doing it myself instead of taking it 2 a shop
what a Silly Design just to replace spark plugs
Joni English I agree. But this vid sure helped me
And changes a year later.... Dam scam artist
And it's only 3 plugs you can't get to ! Smh
i have a 2005 sts the engine light comes on then goes off. the error code i got from auto zone is PO300 and PO036 H02S heater control circuit bank1 sensor 2. Do u have a video for the replacement of the H02S? Is there anything else that could cause this to happen? I dont know why the chk engine light comes on then goes back off.
that sensor should be easy to replace because its very accessible been the 2nd sensor ... but the p0300 code means a random misfire .... have you checked your plugs or intake leaks?
no i dont know alot about under the hood work. i can follow step by step directions. how do i check for leaks?
i will change the coils and plugs. after watching your video i know i can do it. how do i find the bank1 sensor 2?
easier way is just to listen for a "hissing" sound under the hood if you don't have special tools.
and the oxygen sensor is the second one witch has allot more room to replace it then the first sensor
ruclips.net/video/z87M4dw7nBc/видео.html
this is a video on how to replace a sensor on another car but its very similar to yours .. this video I was also working on the 2nd sensor.
thank you for all the help
What type of spark plugs do you recommend??
Edit: got the iridium spark plugs from acDelco works great!!
i usually just get the ac delco .. iridium works great
Is that solenoid on the very back of the manifold hooked to a wire?
yes
how much would you charge for this
Between $80-$100
What was the name of the gasket you said to replace?
upper intake gasket
What happens if after I changed my plugs my engine surges when I start it? Also I didn’t replace coils
how bad of a surge? because all engines do that
@@FalconsGarage I forgot to plug in a hose . My car doesn’t start the first crank when it’s cold but always the second
Why is my car only starting for one second after a change my spark plug
Something must have been left unplugged
Do I need to replace both the plenum gaskets and Intake manifold gaskets?
i recommend that if you get to a gasket then replace it .. so basically if you can see a gasket on your way to replacing what ever original part you are goin for .. replace it
@@FalconsGarage Awesome advice, thank you!
Does this procedure work on a 2009 CTS?
not 100% but VERY similar ..
What if the cadi make a ticking sound when accelerating
probably lifters or low oil
Do you have to replace that gasket ?
yes .. I would recommend that
N