Tango 2 wont Bind to NanoRX Pro - How to Update Crossfire Firmware with TBS Agent M Tango 2 + Mambo
HTML-код
- Опубликовано: 23 апр 2022
- A quick tutorial to update the firmware for Crossfire and FreedomTX on a Tango 2 or Mambo or MicroTX2 or fullsize 2 Watt Crossfire Radios.
www.team-blacksheep.com/AgentM
DO NOT USE Agent X, TBS is working in a fix, but in the mean time, use Agent M to be safe 👌
if you need Team BlackSheep Gear, I sell it all, Crossfire, Tracer, Unify, and more 👌
Tango 2
flyhighfpv.com/products/tbs-t...
CnC Gimbals
flyhighfpv.com/products/pyrod...
ThumbGrippies Stick ends:
flyhighfpv.com/collections/tr...
Wanna Fly like Fly High?
My Digital Quad:
Armattan Marmotte HD - flyhighfpv.com/products/armat...
Caddx Micro Air Unit - flyhighfpv.com/products/caddx...
T-Motor F60 IV Pro 2207.5 1750kv - flyhighfpv.com/products/t-mot...
T-Motor F7 HD F55A Stack - flyhighfpv.com/products/t-mot...
Team Black Sheep NanoRX Crossfire Receiver - flyhighfpv.com/products/cross...
ViFly Finder 2 - flyhighfpv.com/products/vifly...
ChinaHobbyLine Black 6S 1300mAh - flyhighfpv.com/products/cnhl-...
Kevlar Lipo Straps - flyhighfpv.com/products/kevla...
Gemfan 5236 Props - flyhighfpv.com/products/gemfa...
3D Prints:
GoPro Skull Mount - flyhighfpv.com/products/skull...
Skidz - flyhighfpv.com/products/armgu...
Antenna Tail - DJI Dual Tail + Immortal T - flyhighfpv.com/products/anten...
Fat Lip Camera Cage Bumper - $9 in the custom slot - flyhighfpv.com/products/custo...
My Analog Quad:
Armattan Marmotte HD - flyhighfpv.com/products/armat...
Foxeer T-Rex - flyhighfpv.com/products/foxee...
T-Motor F60 IV Pro 2207.5 1750kv - flyhighfpv.com/products/t-mot...
T-Motor F4 F55A Stack - flyhighfpv.com/products/t-mot...
TBS Sixty9 1000MW VTX and Crossfire Receiver - flyhighfpv.com/products/tbs-s...
TrueRC Carbon Matchstick VTX Antenna - flyhighfpv.com/products/truer...
ViFly Finder 2 - flyhighfpv.com/products/vifly...
ChinaHobbyLine Black 6S 1300mAh - flyhighfpv.com/products/cnhl-...
Kevlar Lipo Straps - flyhighfpv.com/products/kevla...
Gemfan 5236 Props - flyhighfpv.com/products/gemfa...
3D Prints:
GoPro Skull Mount - flyhighfpv.com/products/skull...
Skidz - flyhighfpv.com/products/armgu...
Antenna Tail - TBS SMA Pigtail + Immortal T - flyhighfpv.com/products/anten...
Fat Lip Camera Cage Bumper - $9 in the custom slot - flyhighfpv.com/products/custo...
WaterProofing:
MGChemicals Modified Silicone Conformal Coating - Formula 422B - flyhighfpv.com/products/mg-ch...
Tools:
Hex Drivers and Prop Tool (1.5mm, 2mm, 2.5mm, and Prop Driver) - flyhighfpv.com/products/fly-h...
TS100 Soldering Iron (with free 3D printed skin) - flyhighfpv.com/products/ts100...
Tips - B2 Micro Pencil -flyhighfpv.com/products/b2-pe...
Tips - D24 Chisel - flyhighfpv.com/products/d24-c...
Need an FPV Setup for analog?
FatShark HD02 - flyhighfpv.com/products/fatsh...
TBS Fusion Video Receiver Module - flyhighfpv.com/products/tbs-f...
TBS Triumph Pro omni antenna by V.A.S. - flyhighfpv.com/products/tbs-t...
TrueRC X-Air Patch Antenna - flyhighfpv.com/products/truer...
FatShark 18650 Battery case - flyhighfpv.com/products/fatsh...
ETHiX FatShark Straps - flyhighfpv.com/products/ethix...
Lipo Chargers:
ToolKitRC M6D - Dual Charger 500Watts up to 6S - flyhighfpv.com/products/toolk...
ToolKitRC M4Q - Quad Charger 200Watts up to 4S - flyhighfpv.com/products/toolk...
ToolKitRC ADP-180 180Watt AC Power Brick for any charger that takes an XT60 - flyhighfpv.com/products/toolk...
#birmingham #alabama #birminghamdrone #bhamdrone #alabamadrone #carraway #carrawayhospital #thisisalabama #GoPro #hero10 #gopromount
#goproprotection
#cnhl #ChinaHobbyLine
#ETHiX #TBS #CrossFire #tango2 #mambo #tracer #Torvol #FatShark #tmotor #FPV #Drone #Quad #RC #LiPo #sendit 
Наука
Man I'm so glad you're posting this, I got the Nano rx pro from you Saturday and I was about to check TBS about updates because Vitrifly FPV just said something about forgetting to update his nano pro rx. Thanks again for this info.
Always happy to help make things a little easier 🙌
Bro thank you so much for this video.i have watched it 6-8 times and i finally got it working! Thanks man, oh and after watching your video so many times please ignore my comment about your case. You did a really good job with the paint.just so you know i have worked on my tango2 for about 2 weeks an hour or so every few days .watching different videos until I found your.i have taken crossfire off a new build because I couldn’t make it work but the build two weeks ago i refused to give up! Again thanks!
Hit me up if you ever need a hand dude, i'm always happy to help
Great video bro
FYI I finished that johnny fpv build with the pacer v3 1950kv and mamba stack holy shit its magical ✨️ 😍 👌
Hope you have a good weekend bro
I'm already enjoying it. Spent the last night camping on the river and spent all day flying the river, creek, and forest 🙌 Tomorrow is Drift Dayz at the Track 🤘😎🤘💨💨
Nice content bro. Good
Great info 👍
🙌
Props off :)
Where did you get the green case for your Tango2? Thanks
Www.FlyHighFPV.com i have the clear cases in stock, and i've got a tutorial on how to paint the inside of the case 👍
jezus fu*king crist it was that easy i had this problem for a year my only problem now is seting upp controls
but thanks so friking mutch dude :O
Always happy to help 🙌
@@Fly_High_FPV
Great vid- been using tbs tango 2 and nanos for a long time but with the latest firmware updates (on 2 Tango 2s now) the rx still blinks red and tx blinks green but won’t bind- just says to update xF in agent m which I already have to the latest in freedomtx and tango 2!? The rx never seems to update and now I’ve lost all my binds to all my quads! WTF?? I also backed up my SD radio and models files and formatted D’s cards in both radios but no luck with getting the rx nanos to update!
Sounds like bad cards, try replacing the card. Replace the sd contents, and then run through both updates again using Agent M
@@Fly_High_FPV Mike Chin helped me through this- I had done successful updates with Agent M but after that I needed to update the onboard XF again (a second time) in Agent M- after that the binding started working- I was able to rebind and update the nano receivers with the radio.
Now back in the air with 2 quads and just 5 more to re-bind! Thanks for your response! Gonna check out your store!
@Gee4z FPV dope, i'm always happy to help if you need anything🙌 (dont forget to recalibrate the gimbals 👌)
I wanted to buy tango 2 an a cinelog35 with crossfire on it will I need to still go through betaflight or can I just bnf with my DJI goggles?
You just need to bind crossfire receiver, setup the port it's wired to as Serial RX on the ports tabs, and set the reciever to CRSF. You should plan on using betaflight to setup any quad. BnF usually isnt ready to fly, and Betaflight allows you to customize the drone to your needs 👍
I'm about to get another crate of tango 2's in the mail, grab one off my site if you want to reserve one
@@Fly_High_FPV ok cool thanks bro
I have an issue with my tango connecting to nano rx. After update the led turns solid green. Tango says binding ok. What can i do? Thank you 😊
Sounds like you have a good bind (green light). If you arent seeing stick movement, your FC isnt talking to the Receiver. Need to check the BetaFlight ports tab, and be sure SerialRX is checked on ONLY the correct port. May need to check the wiring to identify which port. Also be sure TX goes to RX and RX to TX between FC and Receiver. Feel free to DM me on instsgram @FlyHighFPV for support, I can help you.
@@Fly_High_FPV thank you! Turned out to be old firmware. Flashed the quad and that fixed it!
Idk there is No nano rx listet whe i want to select Driver
I know this is pretty old video but i hope you can help me out, so when I flash my tango 2 to the latest firmware my rx goes into slow blinking green then it turns red when i press the bind button don't know what to do
Instead of using the buttons to bind, try using the crossfire Agent Lite LuA script, it will give you prompts on screen of what to do. Usually you have to click accept to push new FW to your RX during the bind.
@@Fly_High_FPV That's what im doing light goes blinking green then its written "binding ok" on the tango 2 and light turns red on the RX
@@byVeXaa if you see Binding OK, reboot the drone and the controller. If you still have link issues, flash the sd card, flash both firmwares and try again
@Vexa Dag if you want to reach out on instagram @FlyHighFPV i can help ya
@@Fly_High_FPV I flashed the SD card and it worked thanks a lot !
My nano rx didn't want to connect anymore with my tango 2, I restart it and it doesn't bind anymore. When i click on bind on the tango2 the rx stop blinking green and start blinking red till i shut it down but never bind again.
If you can help me with that you're the boss. its the nano rx 45
I would start with a multimeter, make sure that you're getting a full 5volts across GND and 5v. If you're right at 5v, i'd follow the firmware update tutorial. If you're below 5v, you may have a short or a failing 5v reg
can we bind truth usb with out battery ? I hope have not same same shittt
Depends on your Stack. Some will power 5v over usb, and you can bind without battery. Some won't 🤷♂️
Now they both just flash green. It never finnishes. thanks. Been a week me
ssing with it. Any help
A slow green blink on the nanoRX means it's in autobind mode, ready to bind. A green double blink on the nanoRX means you need to do Emergency Mode Reset on the NanoRX. Give me some details, i can probably help. Also you can hit me up on Instagram @FlyHighFPV where you can share vids, pics, and voice for easy troubleshooting 🙌
Also, i just dropped a new video on TBS Agent Desktop. Be sure you're not using Agent X
Hey bro..i have problem like u.. but my firmware up to date...in current new FW there is no update anymore..can you help me for fix the problem
Make sure you're not using Agent X, it's bugged and dead. You should have updated to TBS Agent Desktop or Agent Web, the mobile version.
@@Fly_High_FPV i have updated current FW in Website agentm
But when i try to bind the problem is same … must update XF in agent M
@@pilototodidak maybe you have bad sd card data. You can download the sd contents from tbs, then reflash your radio (both sides freedomtx and crossfire)
@@Fly_High_FPV ok bro.. i’ll try this one… thanks very much
i did this, still stuck, wont work still, please help
What are you stuck on? What fw versions are you running? 1.35 and 6.19 are still rock solid, I know there's a newer version of crossfire available.
Hi, how are you, I did the whole process to update my tango 2 to the latest version, but it did not update, I have tried several times and it is always in version 4, please help me
The jump from 4 to 6.17 is a big one. You'll need to reformat your sd card (breaks binds, so factory reset your NanoRX's first so you dont have to push bind buttons) and then reload fresh SD contents from TBS. Then do the FW updates using Agent M. The SD contents must be up to date and present when the FW flash happens
the content of the sd, I can't find it on the tbs page!!
@@joseguaitero1344 look in the patch notes in Agent X for a link to SD contents. You'll have to check back several versions to find it 👍
@@Fly_High_FPV Hi, I did all the process you mentioned, but there was no result, it's still the same XD
@@joseguaitero1344 can you describe where you're getting stuck?
Rage inducing, TBS not on my good side thanks for the help, will try it out.
If you need further help, hit me up on Instagram, I can fix all TBS 👌