Great Vid. I have my quad connected to my TX16s and I just bought the zorro with the TBS nano tracer. I followed your instructions but can't get the receiver to connect to the zorro with the nano tracer. I am able to re-connect back to the TX16s after the factory reset. Can you help me is there something I am missing? I hope you can help. Thanks
What if my old tango 2 , battrey is died , what should I do ? I have radiomaster 16s with crossfire module I configured everything but still I cant bind my quad , maybe as it is still bound with tango 2 , I can’t show the rx in agent x also, so I can’t update it , please help
Hay man... When I try to enter TBS agent lite menu my display just says ( looking for devices). And that's it... just stuck there. Have you got any suggestions ?
@@TitanFPV im not giving up... This is a great little transmitter, is there a driver i need to install ? Because a bunch of the menu functions are gone
I had a question will factory resetting the drone to unbound the drone from the tango 2. will it keep the programmed button you made for it or do you have to redo all the buttons i mean like. arming drone, different flight modes, beeper, turtle mode or will it be pre saved it all stays the same?
Resetting the receiver (what this video is about) will not effect any settings you have in Betaflight or on the model on your Tango 2. It will just unbind your Tango 2 with the receiver on the quad.
@@TitanFPV sorry for the dumb question i don’t have a tango 2 just researching this stuff before i get one did you’re modes work that you did in betaflight when you went to the new controller
I didn’t have to show arming the quad after I bound it. You can clearly see the telemetry bars after I bound it to the new transmitter. Setting up an arm switch and other switches would be a separate video. That wasn’t the purpose of this video. Let me know where you are at with the arming, and I’ll see if I can help.
Are you binding in D8 or D16 mode? The receiver in BF Configurator should be frsky _D for D8, or frsky _x for D16 mode. If it doesn’t match, the quad won’t bind.
@@TitanFPV does the tango 2 have to be on frsky d8 mode as well in the eternal RF as well ? When I did that it wouldn’t give the bind option and instead just say “looking for device “
When you use any module with the Tango 2, you need to set it to external RF. TBS added support for the module bay in a firmware update, I don’t remember the specific one. You’ll have to set the Tango’s external module to D8 mode to bind.
No. Say you have a Taranis with a Crossfire Micro module, and you are switching to a Tango 2. I was swapping my old Tango 2 pro to my new non pro. What radio you are swapping to isn’t significant. This lets you bind all of your receivers to a new remote without pushing the bind button on the RX. Sometimes receivers are not easily accessible on the quad.
![☀ Танго 2 - с любовью к мелочам. Аппаратура РУ, которую я ждал! [Tango II]](http://i.ytimg.com/vi/v8PkyPr1U7c/mqdefault.jpg)
![☀ Выжимаем 1 Ватт на Танго. Обновление железа, софта и JR модуль. [Tango 2 1Watt Upgrade]](/img/1.gif)
Your video helped me, thanks!
Glad it helped!
Definitely useful
Perfect.
Thanks mate!
Anytime!
This has saved me SO much time man!! I appreciate it!!!!!!!!!!
Glad to help!
Big W
Great Vid. I have my quad connected to my TX16s and I just bought the zorro with the TBS nano tracer. I followed your instructions but can't get the receiver to connect to the zorro with the nano tracer. I am able to re-connect back to the TX16s after the factory reset. Can you help me is there something I am missing? I hope you can help. Thanks
What if my old tango 2 , battrey is died , what should I do ? I have radiomaster 16s with crossfire module I configured everything but still I cant bind my quad , maybe as it is still bound with tango 2 , I can’t show the rx in agent x also, so I can’t update it , please help
You can just press the button on the CRSF nano rx to put it in bind mode. Then try to bind with your Radiomaster.
Hey ! What's the name of your gimbals ? :) looks sweet
Those are the TBS Crown Jewels.
@@TitanFPV I already have the TBS jewels, these looks more like the lotus from taranis ?
@@BeeSight oh lol. I originally had the Grand Lotus on my pro. You are correct!
This saves so much time when swapping radios. Also where did you get those stick ends for your tango?
These are the Vantec Grand Lotus. Make sure you get m3 for the Tango 2. I picked these up at Amain Hobbies.
@@TitanFPV much appreciated. Ill check them out
Anytime!
suffering here...brand new rig does not connect...tango II pro - cinealog 25 crossfire. any tips?? cheers. hours of trying n nothing.
What step in the process did you get to? What firmware are you running on your CRSF module/ Tango 2?
@@TitanFPV I configured my cinelog with betaflight crossfire , tango has the 6.19 firmware, dji goggles already synced with the drone.
Still drone flashes blue n static red but tango can’t bing it all
Looks like they’ve enabled encryption in 6.19. Try disabling that in agent lite, and try to bind again.
How to have, crossfire menu? My tango 2 v3 dont have that, it only shows agent lite and betaflight set up.
Can't bind my tango 2 to cinelog35
Just go into Agent lite, then click on Tango XF. With the quad powered on, hit bind. ruclips.net/video/q2wjH-8laZo/видео.html 3:52 in
mine says looking for devices and nothing showing up. What do I do!?
Hay man...
When I try to enter TBS agent lite menu my display just says ( looking for devices).
And that's it... just stuck there. Have you got any suggestions ?
Did you recently update?
@@TitanFPV no.... Its brand new and im not sure how... I am a noob and my computer skills are point and click level
@@michaelwhinnery164 it may do this if you have your Tango in usb mode (connected to a computer), or if you have it set to external RF.
@@TitanFPV im not giving up... This is a great little transmitter, is there a driver i need to install ? Because a bunch of the menu functions are gone
I had a question will factory resetting the drone to unbound the drone from the tango 2. will it keep the programmed button you made for it or do you have to redo all the buttons i mean like. arming drone, different flight modes, beeper, turtle mode or will it be pre saved it all stays the same?
Resetting the receiver (what this video is about) will not effect any settings you have in Betaflight or on the model on your Tango 2. It will just unbind your Tango 2 with the receiver on the quad.
@@TitanFPV sorry for the dumb question i don’t have a tango 2 just researching this stuff before i get one did you’re modes work that you did in betaflight when you went to the new controller
@@basheepy4351 You’re good man. We all have to learn in this hobby. I had no problems switching to a new controller.
Is there a link for that 3d printed cover anywhere? :)
www.thingiverse.com/thing:4142007
Great way to do it without taking the quads apart. Especially when you have lots of them.
My tbs tango 2 and my nazugl 5 with crossfire stay too long in bind mode (blink green light) They dont conect eachother
You did t even show you arming your quad! Lol… that’s where I’m stuck.
I didn’t have to show arming the quad after I bound it. You can clearly see the telemetry bars after I bound it to the new transmitter. Setting up an arm switch and other switches would be a separate video. That wasn’t the purpose of this video. Let me know where you are at with the arming, and I’ll see if I can help.
I can’t get my tango 2 to bind to moblite 7 any ideas ?
Are you binding in D8 or D16 mode? The receiver in BF Configurator should be frsky _D for D8, or frsky _x for D16 mode. If it doesn’t match, the quad won’t bind.
@@TitanFPV binding in d8 mode and I’ll hit bind on the controller and drone and nothin will happen
@@TitanFPV does the tango 2 have to be on frsky d8 mode as well in the eternal RF as well ? When I did that it wouldn’t give the bind option and instead just say “looking for device “
When you use any module with the Tango 2, you need to set it to external RF. TBS added support for the module bay in a firmware update, I don’t remember the specific one. You’ll have to set the Tango’s external module to D8 mode to bind.
@@TitanFPV It can bind to the moblite 7 without a module right?
So to setup my tango I need to purchase another Tango? That can't be right. This video made it more confusing.
No. Say you have a Taranis with a Crossfire Micro module, and you are switching to a Tango 2. I was swapping my old Tango 2 pro to my new non pro. What radio you are swapping to isn’t significant. This lets you bind all of your receivers to a new remote without pushing the bind button on the RX. Sometimes receivers are not easily accessible on the quad.
Don't try and rip off Bardwell saying