Видео

I bought some new tires and Injora bed lock wheels from Amazon, and for hours I tried putting the wheels together with the steel rings. In the end, I decided to put them together without the inner piece. That worked. Then I stumbled on your video and got out some butter. Lol. I was determined to get the wheels sandwiching that inner ring and tried your method, but it didn't work. I again, went without the inner steel rings. It works.

I cant get one of my beadlocks to stay on after i use it for 20 min

I dont know about you guys but as far as I’m concerned, this wifi module is a waste of money. The lag I have is about 1.5 second. Nobody can follow what I’m doing a second and a half later. You talked about lag… is you lag about the same?

I put RC in power GTS 1804’s on my TT v1. Haha. It rips. HD cam courtesy of Wallsnail 1S lite.

Hi please help... What AUG size of cable use in iFlight Xing 1404 5500kv, need to extend wire for new build. Thanks for your future response response

Thanks for the vid. Very helpful. Was wondering if you run at 96k on your Mob7, or just the Mob6? Happymodel say 48 for Bluejay on Mob7, but if you have had good results with 96, I'd love to know. Cheers.

I wanted to program this thing so I could fly my RC model here in my ranch. not to fly a SpaceX or NASA rocket into orbit. Cause im not a rocket scientist… I’m gonna return this transmitter tomorrow. This is a just a bad nightmare.

What vtx is that? A race v3 or lie the whoop one?

I am seeing in your hardware page, it asks what type of internal module you have. I don't have that. Does anyone here know how I can get the option to change it? I have an ELRS module but it says MULTI in the internal RF option.

Thank you so much. It works with Jumper T Pro V 2 too

The fact you have NMS....truly classy my friend. Thanks for this!!! Thinking about getting a steam deck and this def helps!!!

Permission to ask brother, is your Android version 9 smartphone connected to support receiver fpv skydroid, brother?

Does this cable works in reverse? Meaning can you charge a normal usb type c device using this cable by introducing power from the xt60 end

I used electrical contact cleaner spray

What happens if the bolt doesn’t want to tighten all the way ? Like the bolts are to small yet that’s how it came ?to hold the rim together both pieces

really bad idea, which I just tried 😂😅 my 6s almost caught fire!! 2.2 diesel toyota didn’t start😢 It was about 20v charged and has 100c, so 120A for 1200mah Cells were initially balanced, but after two tries to start the car i’ve measured the lipo, and some cells went down to 2.7-2.9 battery got really hot, and definitely damaged in the long run… I assume this might work for some cars that don’t require high amps of spoke current to start. Not worth the potential damage to lipo, though

4 FPV Simulators or am I blind?

Reason for buffing the battery is the delta from 12-14V of car bat to ~25V (!) of the 6s. I=dV/R so high voltage diff high current, which the 6s could not handle. Next time give the car nothing more then 14V, 12V is ideal.

Promo`SM 😄

Crux35 is a good little Flyer. But the Bottom plate frame is Junk! I already replace 3 of them an they all broke on just Grass crashes. Happymodel needs to make a better frame plate like 4 or 5 Mm thick, because the bottom plate frame design is severely compromised an breaks way to Easy! So I’ll be swapping out all the electronics from the crux35 and installing them on a 3 / 4 “Apex frame, so I don’t have to pay $18 for any soft crashes anymore!

Supppppeeeerrr!!!

Thanks this was very helpful😮

are your tires 2.2 or 1.9 ?

Thanks, really helpful lol

High quality its made in china its a piece of sh!t

Thanks for the useless info everyone already knows and stop wasting peoples time

hello everything is fine? Could you tell me if the crux35 battery cable is 18awg or 16awg? I have a project based on it

Hello, I am trying to bind my a Babyhawk 2 O3 ELRS with the Zorro ELRS version. The red light on the receiver is solid and the Zorro even tells me that telemetry is on or when I dosconnect the battery that it's lost. So somehow I think it should be binded. But I can't arm the drone. Also Zorro does not do anything in Betaflight. Bars don't move. It's just like it is not their. I am actually sure that I updated the Zorro correctly (ExpressLRS) and I also think that I flasehd the Babyhawk correctly. I am trying for over one week now and I do not have any idea how to proceed :/ Can anybody help?

I have this issue with the much more expensive caddx walksnail. Thanks for the video!

Where did you get the foam for the faceplate?

Thanks for showing how...it was actually easier than it looks! The first time I fired up my brand new goggles was after installing the RTC battery!

That’s what she said. Classic. Lol

where is the second model ?

Hi! Another question😅 is the e8 transmitter compatible to connect to any simulator? And specially to drl simulator which im gonna be starting with?😊

Ordered the right Battery and just finished the installation. Easy! Thanks for this!

I am trying this right now with a bnf meteor65 frsky to my E8 radio transmitter. And I cannot figure it out. Any help would be much appreciated. Thank you.

Hi! Quick question, can i bind my e8 transmitter to the mobula 6 or 7? If not what other happy model tinywhoops can i bind my e8 transmitter?(newbie😅)

This process does not work with a Radiomaster ER8 receiver with a boot button and a Radiomaster TX16 transmitter. It may work with your Taranis and HappyModel receiver. I had no luck flashing using WiFi but it will flash using UART. To get the ER8 to flash you need to hold down the boot button while connecting your UART dongle . Then the ELRS configurator will allow you to flash the ER8 with or without a binding phrase. I have not yet been successfull getting the TX16S to bind with the ER8 using a binding phrase. I hope to figure this out soon.

Thanks man. So Simple, but you told and showed it good 👍

what about this model Kester Solder 24-6040-0027 44 Series Core Size 66 Sn60 Pb40

Yo man! I just bought this drone slightly used from a guy, and I want to change my aux switches in beta but when I plug it in it won’t connect and says the firmware is not correct. I’m new and don’t wanna mess it up to wear I can’t fly, any tips?

You may not see this after posting this video 3 years ago, but do you know if this could easily bind the the emax tinyhawk2 controller? I believe they are both frsky d8? Someone near me is selling one slightly used and I’m debating if I should snag it. Thanks man and great information in your video I’m definitely a beginner, I do have a 3D printer to print little parts and such if needed for it

You may not see this after posting this video 3 years ago, but do you know if this could easily bind the the emax tinyhawk2 controller? I believe they are both frsky d8? Someone near me is selling one slightly used and I’m debating if I should snag it. Thanks man and great information in your video

Just FYI for anyone - when you go to add the Bluetooth device - it's *not* initially called "ExpressLRS Joystick". It's called something generic - something like "Bluetooth device", and after you connect to that device - it renames itself to "ExpressLRS Joystick".

Tried to put My injoras and tusks together last night and i can't get them to go together far enough for the inner wheel screws to reach

Welcome Back buddy.. Keep going. best wishes.

Welcome back!

is it possible to use its steamdeck internal joystick to play tryp?

are you changing your power settings in the goggles to the vtx or using elrs radio backpack feature

wow, its cool.. I will try with jumper t8sg with jumper aion nano module.. Thanks for your info