HDZero Goggles RTC Battery Install How-to/ Goggles Disassembly
HTML-код
- Опубликовано: 1 июн 2023
- Get the RTC battery here: amzn.to/43CnOhF
These are affiliate links, and they help support the channel:
Get the HDZero Goggles here: www.hd-zero.com//product-page...
Get the v1 expansion module here: www.hd-zero.com//product-page...
Get the HDZero Nano 90 Camera here: www.hd-zero.com//product-page...
Get the Nano90 Camera + 80mm MIPI cable + Race V2 VTX +Goggle for $599 ($30 savings) here: www.hd-zero.com//product-page...
Get the Micro V2 Camera+120mm MIPI cable + Freestyle VTX +Antenna+Goggle for $619.99 ($35 savings) here: www.hd-zero.com//product-page...
tbh, the hardest part was removing that face plate 😅
Thanks for showing how...it was actually easier than it looks! The first time I fired up my brand new goggles was after installing the RTC battery!
Thank you for this, it worked! I had to triple check the polarity though from other sources as your video shows the plug with the polarity reversed (around
Ordered the right Battery and just finished the installation. Easy! Thanks for this!
Just got mine installed. Thanks for this!
Nice video bud, finally got around to doing this mod, & this was super helpful! Cheers!
Thankyou so much , my install was successful . Your video was a big help.
You are AWESOME! Excellent Tutorial! Thank you!
Finally having a real time stamp on in-google recording files is of great help in keeping track of them- my OCD has settled down. Hopefully the RTC battery will last a few years, like on a computer- if not, it's not a difficult renew. Thanks for your clear and simple tutorial!
Hi Titan, at the beginning you show the right photos with the positive on the right (wrong) and then the photo with the positive on the left (CORRECT) but in the video you put the connector jst in the HDZERO in the reverse position . The positive in the glasses must be on the left, not on the right as you showed in the video.
Great video like always thank you very much for the work you do to help. Again tha k you.
Thanks
Unfortunately my goggles was already opened (having done the SMA mod) so I decided to skip straight to the RTC connector insertion. So reverse polarity it was. I grew suspicious since RTC did not work and then I found the RTC battery was getting luke warm. THEN I noticed from @TheDougNeal the comment regarding reverse polarity... Well, nice howto but I may not be alone in skipping and reverse install.
Thank you for the link to the battery! Not much information on them out there...
Excellent video. Everything working as described here, but more importantly, where did you get the upgraded Goggle foam ? The Goggles themselves are great, but one thing that just isn't is the foam that comes in the box.
Hei! Great step by step tut! What firmware are u on? And where can i get it? Can u please post a link?
Was wondering where you got the face plate padding?