Dat will u do video on the mambo how to setup throttle curve in radio for kissv2 please. I like ur style very easy to understand, ive learnt so much from ur channel. thanks for all u do!!!
Hey man there is sth wrong in ur setup ur order is TAER on the controller and in iflight you typed TREA that would make a huge problem by witching the roll and the yaw that would crash the drone . That happened to me as well . Other than that thank you it was a helpful video for the setup 👍
Hey i know it's an old video but i Hope you can help a newbie out, will this radio work with a "tbs tracer nano rx" receiver? Nothing extra I'd need to buy like a module or something?
I got the TBS Mambo and a nazgul5 V2 with the TBS nano Rx and when y plug the battery into the drone, i see the green light flashing, put the mambo to bind it and it remains in 'binding'. Never gets past there. Any help?
Hello Bro, I hope you can see my comment. Just a quick question. Im new to FPV. Can I bind this controller with my Emax Babyhawk hd. It has a crossfire receiver in it. Thanks bro.
hey - no mate this controller out the box will not bind to crossfire receiver... you would have to buy a module as well... if you are going to be using JUST crossfire look at the tango 2: ruclips.net/video/b5UYxhk5Bdk/видео.html
I can't connect mine I do everything the same as you but when I press bind it just loads and doesn't seem to receive any signal from any drone. I have my whole set up but can't fly could someone help me it's my first fpv drone. (I pressed the bind button and did all the updates) Does anyone know I have the geprc cinebot 30.
it can be a little hit and miss I've heard of issues, just keep trying - TBS also have a online firmware uploader if you have issues, might be worth a look.
Helow...my name is indra from indonesia. I just bought ethix mambo. In betaflight setting, minute 11.45. Is that always to all fc writr TREA..?? im using betafpv pavo30.
Dang just got mine and went to flash latest firmware and now its bricked. Bootloader mode doesn't work either. After flashing new firmware it doesn't power up. Seems like am not alone. This radio is like a ticking time bomb...
@@Datfpv I did with both Agents and have same outcome. I hold power bottom for 3 or more seconds. So many other people are have same issues and I don't understand how TBS can sell me a radio in November when this issue was report back in the release earlier this year. Its so frustrating know that my Jumper T8SG is so much better then the Mambo toy. I should have just went for ELRS module and receivers. What a bad decision I took.
![☀ Самая быстрая РУ система на рынке! Трейсер против Кросса. [TBS Tracer vs Crossfire]](http://i.ytimg.com/vi/1mkMuodaiyw/mqdefault.jpg)
![☀ Самая быстрая РУ система на рынке! Трейсер против Кросса. [TBS Tracer vs Crossfire]](/img/tr.png)
![☀ Навороченный нано приемник + маяк от ТБС. Для серьезных парней. [Crossfire Diversity Nano RX]](http://i.ytimg.com/vi/hj1xBDP8UYY/mqdefault.jpg)
친절하고 섬세함 그리고 알아듣기 쉽도록 해주는 멋진 강의 입니다. 아주 감사합니다
Dat will u do video on the mambo how to setup throttle curve in radio for kissv2 please. I like ur style very easy to understand, ive learnt so much from ur channel. thanks for all u do!!!
Nice and informative as always!
Hey man there is sth wrong in ur setup ur order is TAER on the controller and in iflight you typed TREA that would make a huge problem by witching the roll and the yaw that would crash the drone . That happened to me as well . Other than that thank you it was a helpful video for the setup 👍
Hey i know it's an old video but i Hope you can help a newbie out, will this radio work with a "tbs tracer nano rx" receiver? Nothing extra I'd need to buy like a module or something?
1 year on are you still happy with the Mambo?
Thank you for the vidéo 👍🏻👍🏻
No problem 👍
I got the TBS Mambo and a nazgul5 V2 with the TBS nano Rx and when y plug the battery into the drone, i see the green light flashing, put the mambo to bind it and it remains in 'binding'. Never gets past there. Any help?
Hi can you make a tutorial how to get the mambo talking when the lipo on the quad is low sometimes to busy flying and cooking my lipo's
huge help thank you!
No worries!
Hello Bro, I hope you can see my comment. Just a quick question. Im new to FPV. Can I bind this controller with my Emax Babyhawk hd. It has a crossfire receiver in it. Thanks bro.
hey - no mate this controller out the box will not bind to crossfire receiver... you would have to buy a module as well... if you are going to be using JUST crossfire look at the tango 2: ruclips.net/video/b5UYxhk5Bdk/видео.html
@@Datfpv Thank you so much bro. Its really a good help from you. keep up the videos bro.
Hey bro, sorry one more question. If I buy a tbs crossfire micro tx v2. Will it work with my babyhawk crossfire?
hello. i can't connect the remote to the drone in any way. What I don't do that way?
Hey, do you know what size are the sticks ? M3 or M4 ? Thanks
Very close to sold on tied and true tracer.
Hi great video. My update crashed and now agent x does not allow me to update or do anything, any ideas please
try their agent m - its their online version, link is in the description
I have a question why nothing move in the receiver part on betaflight, I bind the receiver 🤷♂️
make sure you have the battery in the quad as well, but also make sure you have set-up the switches etc in the controller, its all in this video.
I can't connect mine I do everything the same as you but when I press bind it just loads and doesn't seem to receive any signal from any drone. I have my whole set up but can't fly could someone help me it's my first fpv drone. (I pressed the bind button and did all the updates) Does anyone know I have the geprc cinebot 30.
Does crossfire rx bind with tracer? Or do I need a crossfire module
you'll need a crossfire module in the back of the mambo controller to bind with a crossfire receiver
Is that possible to use mambo with beta95x for example? Or do I have to change the RX absolutely ?
Thanks for your video
I want to do the same thing, so I think I will add a tracer rx on a beta fpv without any receiver, because they add the receiver inside the FC I think
which type of cable did you using?
its just a usb c cable
@@Datfpv oh ok thanks 🙂
Hey bro, sorry one more question. If I buy a tbs crossfire micro tx v2. Will it work with my babyhawk crossfire?
yes that module will fit in the back, then after you set it up you can connect to crossfire receivers, like the one in your babyhawk.
@@Datfpv thank you so much bro. Youre such a great help. I hope you’ll make a tutorial on how to bind the module.
And what do i need to do if i want to run crossfire
Could this mambo be ideal to fly rc airplanes with tracer PWM 6 ch receivers?
maybe - don't really know though to be honest
Can I use the mambo with emax tinyhawk 2 freestyle?
No, not unless you buy a external module as well or install tracer receiver into the hawk… but out the box no
hello, how many time it takes to upload main firmware step? thanks!
it can be a little hit and miss I've heard of issues, just keep trying - TBS also have a online firmware uploader if you have issues, might be worth a look.
Helow...my name is indra from indonesia. I just bought ethix mambo.
In betaflight setting, minute 11.45.
Is that always to all fc writr TREA..??
im using betafpv pavo30.
Hi - no, I'd say you have to check it out - AETR is another popular one... see which works for you
@@Datfpv okeyy..thx sir
Does this work on Kiss to?
Yes mate, kiss is the fc just wire in the tracer receiver and good to go
Dang just got mine and went to flash latest firmware and now its bricked. Bootloader mode doesn't work either. After flashing new firmware it doesn't power up. Seems like am not alone. This radio is like a ticking time bomb...
have you tired their online version AGENT-M they call it...
@@Datfpv I did with both Agents and have same outcome. I hold power bottom for 3 or more seconds. So many other people are have same issues and I don't understand how TBS can sell me a radio in November when this issue was report back in the release earlier this year. Its so frustrating know that my Jumper T8SG is so much better then the Mambo toy. I should have just went for ELRS module and receivers. What a bad decision I took.