Spoon Carving - Finishing Cuts (Part 2) | Andy Spoons

Поделиться
HTML-код
  • Опубликовано: 24 авг 2023
  • www.andyspoons.com
    I hope you enjoy the video! a lot of detail is covered here, but please don't hesitate to ask any questions in the comments section.
    Tools used
    Temple Mountain Woodcraft 4" Sloyd Knife
    Temple Mountain Woodcraft Monadnock Hook Knife
    Von Trott Detail Sloyd Knife
    Real Milk Paint Co. Wood Wax

Комментарии • 23

  • @KenRoth-rn2lg
    @KenRoth-rn2lg 3 дня назад

    Thanks much, confirmed what I’m doing, I’m new to carving about 3 months, finishing a project I started with Andreea ‘s video the two of you are moving me right along- good stuff

    • @andyspoons
      @andyspoons  3 дня назад

      So happy to hear that! Thanks for watching 🙂

  • @frederikbruck5210
    @frederikbruck5210 2 месяца назад +1

    That flowing curvature is exactly, what makes it an "Andy-Spoon"!
    You found that design in years of practice, so stick to what is the most pleasant form in your taste.
    Otherwise, people could also buy any Peter-, Paul- or Mary-spoon!
    I watched a lot of carving videos here on YT and by now, I can almost for sure tell from the end-product, who the maker was.
    For me that's the most important part which sets handwork apart from any industrial product and makes it so beautiful.

    • @andyspoons
      @andyspoons  2 месяца назад +1

      That's special to hear, and something I am always hoping for! One of the reasons I don't add a makers mark is the hope that my design and end product speaks for itself 🙂

  • @susanp.collins7834
    @susanp.collins7834 3 месяца назад +1

    What a SWEET smile you have, Andy!

  • @JensDenborg
    @JensDenborg 9 месяцев назад +1

    Super video with a lot of good and well-explained thoughts. A true joy to watch!

    • @andyspoons
      @andyspoons  9 месяцев назад

      Thank you so much!

  • @KettleCamping
    @KettleCamping 7 месяцев назад +2

    Fun to watch! You explain well! Thank you! 👍

    • @andyspoons
      @andyspoons  7 месяцев назад

      Thank you so much for watching!

  • @josephkerley363
    @josephkerley363 10 месяцев назад

    Very nice. I paused the video and ordered the wood wax. I've been using mineral oil, which I have nothing against, it does a fine job. Just though I'd give the wood wax a go on my spoons. I've always had a bit of a problem with the bowl edges. Somehow I get through it but am never really happy, yet. My spoons though have a lot of curves to them which makes finishing cuts a challenge. Good information in your videos, keep them coming.

    • @andyspoons
      @andyspoons  10 месяцев назад

      I'm happy to hear that. Personally I was keen to move away from petrochemical products in general when it comes to finishes, so the Wood Wax has been a very easy product to shift to. I would love to hear how you find it!

  • @curiousgeorge555
    @curiousgeorge555 10 месяцев назад +1

    You're very good at articulating your thoughts. I'm sure many of us appreciate that. Loved the part about why not to use sandpaper. I've been hearing that for many a moon and most people only talk about the fuzziness and that it can cover a lack of skill.

    • @andyspoons
      @andyspoons  10 месяцев назад

      I certainly don't want to judge anyone for using sandpaper as a part of their process, don't get me wrong! It's just a personal preference, and I like to try and clarify my stance when I can 🙂

    • @andyspoons
      @andyspoons  10 месяцев назад

      Thank you so much for being here!

  • @davidgleason2519
    @davidgleason2519 10 месяцев назад +1

    This was very helpful. Thank you. do you ever bake your spoons to achieve a different color?

    • @andyspoons
      @andyspoons  10 месяцев назад

      Hi there, all the time! Feel free to check out my Instagram highlights on exactly that 🙂👌

    • @susanp.collins7834
      @susanp.collins7834 4 месяца назад

      ​​@@andyspoonsAt what heat and for how long do you bake, Andy? I saw on your page you offered a baked spoon... Cherry?

  • @titsmcgee852
    @titsmcgee852 10 месяцев назад

    For me, I sand my spoons to at least 800 because I need to, I can't seem to get the same finish with just my knives like you and others are able to, particularly on figured wood. Probably means I need to get better at sharpening.

    • @andyspoons
      @andyspoons  10 месяцев назад +1

      Sharpening is certainly a big part of that, for sure! And getting comfortable with grain direction is another big thing. It's a patient journey, and as long as you are enjoying what you create, you are doing the right thing! 🙂

    • @titsmcgee852
      @titsmcgee852 10 месяцев назад +1

      @@andyspoons Thanks Andy. Are you able to carve highly figured wood in the same manner or does it not really work? I carved some rippled melaleuca quinquenervia and it didn't get along with my sloyd at all.

    • @andyspoons
      @andyspoons  10 месяцев назад

      You can definitely still get a knife/burnished finish from figured timber, but it can be a real Rubik's cube with the grain. It's not really something I approach very often!

    • @susanp.collins7834
      @susanp.collins7834 3 месяца назад

      I finished my spoon with 800. I just...enjoyed fiddling with it, really. Even now, when I'm polishing it, I sit there holding it and gently rubbing my thumb in the bowl. Sometimes I run my fingers over the profile and stare into space, not looking at the spoon, while I think about things. Is this the spoon equivalent of worry beads?