Hi Andie. I have to say that this is still my favourite video/build. I have a real soft spot for the journey that I took. Everything that is in the video was a genuine story of experiment that lead to a build. thank you for appreciating it.
I commented before, because intellectually I could follow everything you said, but ow that I’m actually trying to do this, I think I am out of my depth!!
Hayley Philips. Hope you are well. And thank you very much. You managed to stumble on my favourite build in the whole set of videos. Not my best video but a lovely experience. I hope you and yours are doing well.
Great video like it that you show your mistakes, I have the same problem but that’s how you learn improvisation. I am just trying to get back into wood working. I used to attend wood work classes at night school in my twenties, I made a cabinet from African Walnut. The teacher recommended that after I had lacquered it to rub it down with fine wire wool and then wax it. I took his advice and was really pleased with the satin like finish. Nice to see a British wood worker in his shed making things with the tools he has. 🌟🌟🌟🌟🌟
Nice job. General Finishes makes some really durable (& low/no VOC) water based finishes. I've used their semigloss top coat & they also make glossy plus a dead flat clear finish. It's durable enough for flooring so should be plenty good for furniture. I've had great success with it, no yellowing after 5 years. I used it over 5 years ago on a piece I made from white ash with walnut accents & I wanted to keep the really nice light color of the ash in its original color. It looks the same today as when I first built it.
That is really nice. Love your humor, it makes your videos that much more enjoyable. I would say the lacquer would protect, I would do some wet sanding in between coats to get a different sheen.
Hi Lisa. Thank you so much. I was worried that trying to be funny would put people off. Great idea with the wet sanding by the way. I get lazy sometimes and that would definitely explain the lack of sheen. Thank you for watching too.
well,great experiment and great looking "box"....uses? whatever you would wish....your skills are exponentially growing....well done.......great video again
Adam. That is so kind. Thank you. I really enjoyed this one. And thank you for watching. I think you are right. I need to just put it to use as something.
Well done! The kerf method seems to be working better than I anticipated. 🙂 I have only used it for plywood which was later puttyed (is that the word in English..?) and sanded smooth before painting. To avoid splintering of the wood on the outside it isn't uncommon to use a strip of sheet metal which is pulled tight (maybe using small clamps) when bending the wood. This method can also be used when laminating strips as you did with your hooks.
Great idea with the sheet metal. Would definitely have made it easier if I had it to hand. These 2 were both really experimental and I am shocked to say that the hooks are still holding up really well. Really shocked by that. This kerf bent draw box still hasn't found its use and the draw front has broken my heart a little as the wood has cupped. I suspect it is because I stored it in my unheated shed and didn't lacquer the back. Who knows. Still the best thing I have built I think. Mainly because I just followed no plans and had no expectations. I think that we can accept puttyed as a word, It certainly describes the action.
Another great video - and a great achievement! Well done! Personally, I hate rattle-cans and avoid using them whenever possible. My usual finish is Osmo Polyx hard-wax oil. It isn't cheap but a very, very little goes a vary, very long way. It is incredible just how far it can spread. This isn't me being cheap - for the best finish, it is important that Polyx is applied in two microscopely thin layers. I like to apply it with a white non-abrasive pad. Polyx was developed for use on floors, so it is a very hard-wearing finish. However (and this IS me being cheap) I have recently started using Oli Natura Hard Wax Oil instead. It seems to be very similar to Polyx - it looks the same, smells the same and is applied in the same way - but it costs a great deal less than Polyx 🙂.
Hey Clive. Thank you so much for such a great comment. And for watching of course. That is the second recommendation for Oslo wax oil. I will grab a pot and see how it goes. I don't really worry about the price because now I am filming the number of projects I am doing has dropped a lot. I tried Danish oil on one that I will put up in a few weeks and was very disappointed by the lack lustre finish. I will definitely check out the cheaper alternative though. I love a good recommendation. Thank you so much
I made a desk recently and stained it with 4 coats of lacquer, 3 coats, then sanded and then fourth coat. It looks good enough but I think if I had to do it again, I would do 3 coats, sand, 4th coat, sand and then 5th coat. Sanding with 400 grit.
It is a learning curve and I think what you say is right. The more you put in the more you get out. The sanding is not actually too time consuming so doing it a few times is probably only a few minutes added to the project and the feel will be amazing.
Hi Milmo Wood. Thank you so much. I was pleasantly surprised. Great advise on the Osmo oil. I will take a look. Keep hearing about it. How is your health?
@@startmaking1 still pretty grim but very slowly improving. Long covid is a bugger lol. I'm hoping to get back to video making for my channel soon. Fingers crossed 🤞
@@MilmoWood Sorry to hear that you are still suffering. I have a family member in the same boat. I look forward to seeing your next video when you are back up and running. You'll get there.
Looks beautiful and I love it as a monitor lift. Add some legs and it would also be a great bedside or entryway table. For the laquer did you try the brown paper bag trick to burnish the final coat?
Hi Valerie. I didn't, but am googling it right after typing this. Thank you so much. I did have a thought of attaching it to a wall by the front door to put keys on/in but after checking we don't have a wall that would suit. Legs would definitely work. Thank you for watching and for commenting.
Wow man, it turn out really great 👍 and all just with a plunge saw and handtools 😜 i just use wipe on lacker (my wife likes: mat finish , and i likes a semi gloss , so sometimes it's a give and take )😂😂 keep you're projects coming
WOw. Thank you for such a nice comment. I was truly surprised at the results. will have to take a look at the wipe on finishes in general. I also really like semi gloss but watched a video recently with a big channel saying that it is better to go satin. Who knows. I guess it is personal. Thank you for watching and commenting. Much appreciated.
Great video and a great piece that you made. Could use it as a floating bedside table, think legs would spoil it. I would go with what the others have said and use osmo although one of my projects I used yacht varnish and that gave a great glossy finish. Keep the video coming, very informative 👍
Hi Darren. Thank you so much. I agree that after looking at it for a while, legs are not right. Sadly our bedroom is in the roof so no flat wall, otherwise that would be really nice. I have just bought OSMO, would you apply it over the danish oil I already have on it? Thank you for watching too.
Hi Mark. Shame about the sloping walls in the bedroom. I've not put osmo on top of danish oil but i asked good old google and it says no. Will work on top of a stain but not another oil based product. Probably have to sand it back to bare wood 😕
At first glance, It looks like a mini boombox. At least if would be if it had speakers. Kerf bending is always interesting to see if it works. But tis a great experiment.
Oh that would be super cool. A boom box. I could try to wire in a wireless charger and make it bluetooth. Not sure about electronics but how hard can it be lol. I think that you may just have tempted me to have another go at this in the near future. Thank you so much for watching and for commenting.
@@startmaking1 it was really fun to watch. Both the exploring part and what obstacles you came across and how you solved them. Something like this tickles me and have done for a long while, but for a lack of space it would be a small build and therefor I just can’t seem to get one done because what would it be!? 😂
It was a challenge but the moment that the wood didn't snap was bonkers. I was so sure it would. I really have to use it for something soon as it is just sat in my office looking at me. Or I could make another and turn it into a speaker.
Really like this video, ni9cely done with simple tool's and Jig's who needs all the expensive tools just to "start making" (see what I did there) I'm really loving your channel
IT is amazing how many people are suggesting Osmo. I feel like I should have known. Thank you so much for the advise. I don't really mind the price as I am not making as much as I was, now I am filming. Thank you for watching too.
Hey Mark that looks great. Think it's gotta be just monitor stand or a side board on a side board with set of maybe 4" legs on it. For finish my go to has always been Danish oil can't remember the specific brand(colron refined) that's the brand usually takes 2 coats but you get it in the range it's were it's cheapest one the best ones or good old beeswax finish. Can I ask what wood did u use for the starting bent structure?? 👍🏴👏
Hi Michael. That is a great idea., And I will have to get some more Danish oil to try. Mine went funny in the cold last winter. The Outer wood is Sapele. You get some beautiful grain patterns especially if there are some lighter grains mixed in. I use it quite a lot. The shelf is Beach and the draw was oak. I may regret that one come winter if it expands but lets see. Thank you for watching another one and for yet another great comment. I have finally finished the small builds that sell filming but editing is very time consuming. That and I have another video ready to go. Not long though.
@@startmaking1 great can't wait for that one yea a must say Danish oil has always been my go to it doesn't like cold to be fair the bottle basically just sets I usually keep mine under sink during winter. No bother thanks for that gonna attempt one them a think maybe not with the drawers though bit to advanced for me just now. Be good to see what kinda smalls you come up with. Serving boards and stuff have been good one for me so far out elm and chesnut and couple sycamore but a fear am pricing to low. 🏴👍
@@startmaking1 yea well when am offering nice live edge slab serving boards at around £35 mark to cafes think am selling myself short. Have u an email I'll drop u couple photos them get another makes opinion on how much you'd charge? 🏴👍
I like the idea. Shame it is not deeper with the draw coming out further so I could stand the CD cases upright. Someone suggested making one with speakers and that wold be cool with CD storage in the middle. Thank you for commenting and for watching.
Another Osmo vote from me. I apply multiple thin coats, wipe off any tackiness after a couple of hours (quicker in hot weather, slower in 'UK 2023 summer' weather) and fine sand between coats, switching to 0000 steel wool as the finish improves. Beeswax polish over the top further refines the finish, and also improves with additional applications over time. I refinished four oak dining chairs last year which turned into a marathon project, the chairs were in use throughout so each needed a protective finish asap. I totally lost track of which chair was which and how many coats of Osmo each had had, but when completed they looked perfectly matched. I'm sure I ended up applying Osmo after I'd applied beeswax polish, not a problem! One chance discovery was an accidental paint spill that dried on one of the chairs before it was noticed ("Noooooo!"). I removed the paint with Pink Stuff abrasive paste, fully expecting to have to sand back and refinish... but the Pink Stuff created a lovely glossy finish, which beeswax polish really enhanced. I gambled and Pink Stuffed the entire set, I can't promise there won't be long term problems but they still look awesome a year on. Awesome steam bending, I'd have bet big money it would break given such a tight curve... always nice to learn something new, and I have no problem with being proved wrong (probably cos I've had plenty of practice) 😂
I am clearly a diehard! This video was outstanding. I love your sincerity!
Hi Andie. I have to say that this is still my favourite video/build. I have a real soft spot for the journey that I took. Everything that is in the video was a genuine story of experiment that lead to a build. thank you for appreciating it.
I commented before, because intellectually I could follow everything you said, but ow that I’m actually trying to do this, I think I am out of my depth!!
Another great video Mark. And I've learnt a new word - Kerf (and I thought you were saying curb !!)
Thank you.
Great demonstration of bending timber and showing multiple uses for this process. Well done. Thanks
My favourite build to date.
Love this Mark! Awesome channel!
Hayley Philips. Hope you are well. And thank you very much. You managed to stumble on my favourite build in the whole set of videos. Not my best video but a lovely experience. I hope you and yours are doing well.
Great experiment
Thank you! Cheers!
I hope you enjoy the video. Please comment if you can help me figure out what to use this for. Also clicking Like is greatly appreciated.
Great video like it that you show your mistakes, I have the same problem but that’s how you learn improvisation. I am just trying to get back into wood working. I used to attend wood work classes at night school in my twenties, I made a cabinet from African Walnut. The teacher recommended that after I had lacquered it to rub it down with fine wire wool and then wax it. I took his advice and was really pleased with the satin like finish. Nice to see a British wood worker in his shed making things with the tools he has. 🌟🌟🌟🌟🌟
Hi David. Thank you very much. I think that this one is crying out to be rubbed with the wool and waxed. It would definitely help.
Nice job. General Finishes makes some really durable (& low/no VOC) water based finishes. I've used their semigloss top coat & they also make glossy plus a dead flat clear finish. It's durable enough for flooring so should be plenty good for furniture. I've had great success with it, no yellowing after 5 years. I used it over 5 years ago on a piece I made from white ash with walnut accents & I wanted to keep the really nice light color of the ash in its original color. It looks the same today as when I first built it.
That is a great tip. I am still struggling with what finish to use for what. Thank you for the advice.
That is really nice. Love your humor, it makes your videos that much more enjoyable. I would say the lacquer would protect, I would do some wet sanding in between coats to get a different sheen.
Hi Lisa. Thank you so much. I was worried that trying to be funny would put people off. Great idea with the wet sanding by the way. I get lazy sometimes and that would definitely explain the lack of sheen. Thank you for watching too.
well,great experiment and great looking "box"....uses? whatever you would wish....your skills are exponentially growing....well done.......great video again
Adam. That is so kind. Thank you. I really enjoyed this one. And thank you for watching. I think you are right. I need to just put it to use as something.
Awesome job on the build! Really a beautiful final product. I think it would make a really nice place to store remotes under a TV.
What a lovely idea. Thank you for watching too. Apologies for the late reply.
Well done! The kerf method seems to be working better than I anticipated. 🙂
I have only used it for plywood which was later puttyed (is that the word in English..?) and sanded smooth before painting.
To avoid splintering of the wood on the outside it isn't uncommon to use a strip of sheet metal which is pulled tight (maybe using small clamps) when bending the wood.
This method can also be used when laminating strips as you did with your hooks.
Great idea with the sheet metal. Would definitely have made it easier if I had it to hand. These 2 were both really experimental and I am shocked to say that the hooks are still holding up really well. Really shocked by that. This kerf bent draw box still hasn't found its use and the draw front has broken my heart a little as the wood has cupped. I suspect it is because I stored it in my unheated shed and didn't lacquer the back. Who knows. Still the best thing I have built I think. Mainly because I just followed no plans and had no expectations. I think that we can accept puttyed as a word, It certainly describes the action.
Love this ❤
Thank you. This is still my favourite all time build and is still on my shelf in my office without a purpose lol.
The original housing would be nice as a radio with speakers each end.
Maybe even nicer than this. I may have to make a second.
Another great video - and a great achievement! Well done!
Personally, I hate rattle-cans and avoid using them whenever possible.
My usual finish is Osmo Polyx hard-wax oil. It isn't cheap but a very, very little goes a vary, very long way. It is incredible just how far it can spread. This isn't me being cheap - for the best finish, it is important that Polyx is applied in two microscopely thin layers. I like to apply it with a white non-abrasive pad.
Polyx was developed for use on floors, so it is a very hard-wearing finish.
However (and this IS me being cheap) I have recently started using Oli Natura Hard Wax Oil instead. It seems to be very similar to Polyx - it looks the same, smells the same and is applied in the same way - but it costs a great deal less than Polyx 🙂.
Hey Clive. Thank you so much for such a great comment. And for watching of course. That is the second recommendation for Oslo wax oil. I will grab a pot and see how it goes. I don't really worry about the price because now I am filming the number of projects I am doing has dropped a lot. I tried Danish oil on one that I will put up in a few weeks and was very disappointed by the lack lustre finish. I will definitely check out the cheaper alternative though. I love a good recommendation. Thank you so much
I made a desk recently and stained it with 4 coats of lacquer, 3 coats, then sanded and then fourth coat. It looks good enough but I think if I had to do it again, I would do 3 coats, sand, 4th coat, sand and then 5th coat. Sanding with 400 grit.
It is a learning curve and I think what you say is right. The more you put in the more you get out. The sanding is not actually too time consuming so doing it a few times is probably only a few minutes added to the project and the feel will be amazing.
looks more like a beautiful speaker cabinet
Hi Ronny. I think you are right and it would have been more useful too .
Considering the tools used that's a great job. Nice piece.
I love Osmo hard oil finish. It can be wiped on to.
Hi Milmo Wood. Thank you so much. I was pleasantly surprised. Great advise on the Osmo oil. I will take a look. Keep hearing about it. How is your health?
@@startmaking1 still pretty grim but very slowly improving. Long covid is a bugger lol.
I'm hoping to get back to video making for my channel soon. Fingers crossed 🤞
@@MilmoWood Sorry to hear that you are still suffering. I have a family member in the same boat. I look forward to seeing your next video when you are back up and running. You'll get there.
I like osmo. It's hard wearing and easy to apply
Hi Richard. Thank you. It is easily the most popular recommendation so far. Makes me wonder how I haven't tried it yet? Thank you
Looks beautiful and I love it as a monitor lift. Add some legs and it would also be a great bedside or entryway table.
For the laquer did you try the brown paper bag trick to burnish the final coat?
Hi Valerie. I didn't, but am googling it right after typing this. Thank you so much. I did have a thought of attaching it to a wall by the front door to put keys on/in but after checking we don't have a wall that would suit. Legs would definitely work. Thank you for watching and for commenting.
Wow man, it turn out really great 👍 and all just with a plunge saw and handtools 😜 i just use wipe on lacker (my wife likes: mat finish , and i likes a semi gloss , so sometimes it's a give and take )😂😂 keep you're projects coming
WOw. Thank you for such a nice comment. I was truly surprised at the results. will have to take a look at the wipe on finishes in general. I also really like semi gloss but watched a video recently with a big channel saying that it is better to go satin. Who knows. I guess it is personal. Thank you for watching and commenting. Much appreciated.
Great video and a great piece that you made. Could use it as a floating bedside table, think legs would spoil it. I would go with what the others have said and use osmo although one of my projects I used yacht varnish and that gave a great glossy finish. Keep the video coming, very informative 👍
Hi Darren. Thank you so much. I agree that after looking at it for a while, legs are not right. Sadly our bedroom is in the roof so no flat wall, otherwise that would be really nice. I have just bought OSMO, would you apply it over the danish oil I already have on it? Thank you for watching too.
Hi Mark. Shame about the sloping walls in the bedroom. I've not put osmo on top of danish oil but i asked good old google and it says no. Will work on top of a stain but not another oil based product. Probably have to sand it back to bare wood 😕
@@darrensworkshop800 Wow that was luck. Thank you very much for the heads up. I was thinking about just giving it a blast. Dodged a bullet there.
At first glance, It looks like a mini boombox. At least if would be if it had speakers.
Kerf bending is always interesting to see if it works. But tis a great experiment.
Oh that would be super cool. A boom box. I could try to wire in a wireless charger and make it bluetooth. Not sure about electronics but how hard can it be lol. I think that you may just have tempted me to have another go at this in the near future. Thank you so much for watching and for commenting.
@@startmaking1 No problem. The wiring isn't that hard. It's the getting all the right voltage and stuff that is
@@bekahmarie489 good point. And I am not in any way skilled in that area. Accidents could happen. I need another plan.
@@startmaking1 RUclips is how I learned :P
@@bekahmarie489 Me Too. I better get researching .
👌👌👌
You found my favourite build. Still not used it lol
@@startmaking1 it was really fun to watch. Both the exploring part and what obstacles you came across and how you solved them.
Something like this tickles me and have done for a long while, but for a lack of space it would be a small build and therefor I just can’t seem to get one done because what would it be!? 😂
It was a challenge but the moment that the wood didn't snap was bonkers. I was so sure it would. I really have to use it for something soon as it is just sat in my office looking at me.
Or I could make another and turn it into a speaker.
Rustin's plastic finish. Two pack, very hard, takes a shine if you want
I will have to search that out. Not sure I have ever tried it before. Thank you very much for the advise and for watching.
Really like this video, ni9cely done with simple tool's and Jig's who needs all the expensive tools just to "start making" (see what I did there) I'm really loving your channel
Thank you so much and you even fitted a pun in. Love it.
Personally, I will use Rubio monocoat or Osmo for finish. A bit expensive but at the end, great result.
IT is amazing how many people are suggesting Osmo. I feel like I should have known. Thank you so much for the advise. I don't really mind the price as I am not making as much as I was, now I am filming. Thank you for watching too.
@@startmaking1 I really enjoy your videos. Osmo is awesome, you will love it. Cheers from Canada.
@@luctoulouse You are too kind. Thank you
Hey Mark that looks great. Think it's gotta be just monitor stand or a side board on a side board with set of maybe 4" legs on it. For finish my go to has always been Danish oil can't remember the specific brand(colron refined) that's the brand usually takes 2 coats but you get it in the range it's were it's cheapest one the best ones or good old beeswax finish. Can I ask what wood did u use for the starting bent structure?? 👍🏴👏
Hi Michael. That is a great idea., And I will have to get some more Danish oil to try. Mine went funny in the cold last winter. The Outer wood is Sapele. You get some beautiful grain patterns especially if there are some lighter grains mixed in. I use it quite a lot. The shelf is Beach and the draw was oak. I may regret that one come winter if it expands but lets see. Thank you for watching another one and for yet another great comment. I have finally finished the small builds that sell filming but editing is very time consuming. That and I have another video ready to go. Not long though.
@@startmaking1 great can't wait for that one yea a must say Danish oil has always been my go to it doesn't like cold to be fair the bottle basically just sets I usually keep mine under sink during winter. No bother thanks for that gonna attempt one them a think maybe not with the drawers though bit to advanced for me just now. Be good to see what kinda smalls you come up with. Serving boards and stuff have been good one for me so far out elm and chesnut and couple sycamore but a fear am pricing to low. 🏴👍
@@michaelwillson6847 Mine are a little simpler. Hard not to under price, but you have to value your skill
@@startmaking1 yea well when am offering nice live edge slab serving boards at around £35 mark to cafes think am selling myself short. Have u an email I'll drop u couple photos them get another makes opinion on how much you'd charge? 🏴👍
@@michaelwillson6847 yeah bud. Pop them over to startmaking2022@gmail.com
Maybe it's an ornamental desk top organizer?
So far it is a dust collector because I can't decide. Yours is the closest to what I will use it for. Eventually,
Is it a cd draw and stand for a music centre ?
I like the idea. Shame it is not deeper with the draw coming out further so I could stand the CD cases upright. Someone suggested making one with speakers and that wold be cool with CD storage in the middle. Thank you for commenting and for watching.
@@startmaking1 nice work by the way…
@@doozerakapuckfutin thank you
Another Osmo vote from me. I apply multiple thin coats, wipe off any tackiness after a couple of hours (quicker in hot weather, slower in 'UK 2023 summer' weather) and fine sand between coats, switching to 0000 steel wool as the finish improves. Beeswax polish over the top further refines the finish, and also improves with additional applications over time. I refinished four oak dining chairs last year which turned into a marathon project, the chairs were in use throughout so each needed a protective finish asap. I totally lost track of which chair was which and how many coats of Osmo each had had, but when completed they looked perfectly matched. I'm sure I ended up applying Osmo after I'd applied beeswax polish, not a problem! One chance discovery was an accidental paint spill that dried on one of the chairs before it was noticed ("Noooooo!"). I removed the paint with Pink Stuff abrasive paste, fully expecting to have to sand back and refinish... but the Pink Stuff created a lovely glossy finish, which beeswax polish really enhanced. I gambled and Pink Stuffed the entire set, I can't promise there won't be long term problems but they still look awesome a year on.
Awesome steam bending, I'd have bet big money it would break given such a tight curve... always nice to learn something new, and I have no problem with being proved wrong (probably cos I've had plenty of practice) 😂
Witchcraft
my speciality