I'm getting one as a Christmas gift to myself. Thanks for posting. You can't beat the price and quality of this gun not to mention that make left handed ones for people like myself who have limited choices.
Great video! I have the Marine Defender and this is completely relevant to the build on mine. Thanks for the great pointer on getting the firing assembly back on. Saved me a lot of wondering about that.
I bought an SXP "Shadow Defender", which sounds like a bad 80's band name... I'm not new to shotguns, but I am new to pump-action, so I bought 6 dummy rounds & I've been practicing a bit. I've put about 70 rounds through it at my local range, 20 of those were slugs, and it's loosened up nicely so the action is very smooth. No loose components. From the beginning, whenever I load shells into the mag, the spring is pretty noisy as it accepts shells (dummy or real). It's the obvious sound of a spring compressing inside the mag tube - it's not a problem, the gun's in good condition & I've cleaned it & sprayed some gun oil into the action but I haven't had it apart yet. My question: Should I spray our pour any of these products (White Lithium Grease / Ballistol gun lube / Hoppes 9 lubricating oil) into the mag chamber? On the spring itself? If so, how much? If not, why not? It holds 5 in the mag & I only use 2.75" shells. I might try a 3" shell someday but I've no real need for that.
@norcalrambler101 literally bought a winchester 1300 earlier this week secondhand. Having never owned this sort of model before, this is the exact video I was looking for to guide me on performing a full tear-down and cleaning. Thank you for posting this. Edit: I was able to get a copy of the MOA, but images on a page are only so useful in this situation. There is no substitute for showing/telling the practical side of how to do something like this.
I have a brand new Remington 870 field master I have only shot 7 target loads through it and I went to clean it and the patches keep on coming out a brown color and I let the break free clp set for about 25 minutes and I repeated this for 3 times and they are still coming out brown I used the bronze brush in between the patches and it doesent help but I looked inside the barrel with a bore light and it looks completely clean
*I have a question* Got mine used and the firing pin is the same as in the video but won't go off, pull the trigger enough and change the angle and it will. Would a 3.5" firing pin fix this?
Great video, the guy that replied that he didn't here. The cap threading getting the clicking sound. I wouldn't shoot that gun. Cause the thread's Could possibly be damaged. I would have it checked out by gun Smith. I own 2 of these shotguns, a short one and a long 1. And you should be here in those threads lock on that Spring cap.
After every time cleaning your gun with solvents, you should oil your gun. You only need a very thin layer of oil. We like Hoppe’s gun oil. A gun smith I know recommends Rem Oil (a mineral-oil-based formula with Teflon®). A matte barrel means it has a coating on it but most normal brands of gun oil will not hurt the finish. Thanks for the comment and I hope this helps.
I got One for Christmas I haven’t use but do I have to clean it first? The cabelas guy tell me every gun has to be clean before use or maybe he was just trying to sale me a 140$ cleaning kit
I don’t know the recommended procedure but I did not clean mine before first use. Safety First Important reminder, always carefully check to be sure your weapon is Not loaded prior to cleaning.
If your not hearing that then your plastic piece at the tip of the tube in not sticking out, make sure it's protruding alittle then if right you will hear the click when your screwing the cap back on.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I'm getting one as a Christmas gift to myself. Thanks for posting. You can't beat the price and quality of this gun not to mention that make left handed ones for people like myself who have limited choices.
I just recently picked up one of these SXP's and found your video presentation most helpful. Thank you for posting.
Glad it was helpful!
Great video! I have the Marine Defender and this is completely relevant to the build on mine. Thanks for the great pointer on getting the firing assembly back on. Saved me a lot of wondering about that.
I’ve always had nothing but problems getting the bolt back on the pump. I think “a bit finicky” is a understatement lol
Great video though! I always come to this video trying to get the bolt back on
I was having the same issue, ended up removing the trigger mechanism and it went in with no issues
I have this shotgun and its been a good one ive had it for 11 years
Thank you ! Greetings from Poland
Title should be ''disasembly'' and not ''cleaning'' because no actual cleaning was performed.
Good catch. Thanks for the comment. Got caught up in disassemble and reassemble. We will have to make an actual cleaning video.
@@norcalrambler101 Thank you for your videos.
Good job!
This is going to be my next shotgun.
I'm liking that Field model with the wood furniture.
Good choice!
Just bought mine today, thanks for the video. Definitely much easier than snw mp12 and the ksg
Nevermind I twisted the part that holds the spring 180* so all good. Great video. Thank you.
Great breakdown and commentary. Just picked up a defender series, mossy 500 might take a backseat for a while
Love my Winchester 1300 speed pump defender it’s my go to over my 870 and my 590 great gun great video
The Winchester 1300 is a great rifle. Thanks for watching.
I bought an SXP "Shadow Defender", which sounds like a bad 80's band name...
I'm not new to shotguns, but I am new to pump-action, so I bought 6 dummy rounds & I've been practicing a bit.
I've put about 70 rounds through it at my local range, 20 of those were slugs, and it's loosened up nicely so the action is very smooth. No loose components.
From the beginning, whenever I load shells into the mag, the spring is pretty noisy as it accepts shells (dummy or real). It's the obvious sound of a spring compressing inside the mag tube - it's not a problem, the gun's in good condition & I've cleaned it & sprayed some gun oil into the action but I haven't had it apart yet.
My question: Should I spray our pour any of these products (White Lithium Grease / Ballistol gun lube / Hoppes 9 lubricating oil) into the mag chamber? On the spring itself? If so, how much? If not, why not? It holds 5 in the mag & I only use 2.75" shells. I might try a 3" shell someday but I've no real need for that.
Nicely done. Have an older model Winchester1300. Nearly the same gun except for some cosmetics. Fine firearms.
The Winchester 1300 is a great rifle. Thanks for watching.
@norcalrambler101 literally bought a winchester 1300 earlier this week secondhand.
Having never owned this sort of model before, this is the exact video I was looking for to guide me on performing a full tear-down and cleaning.
Thank you for posting this.
Edit: I was able to get a copy of the MOA, but images on a page are only so useful in this situation. There is no substitute for showing/telling the practical side of how to do something like this.
I have a brand new Remington 870 field master I have only shot 7 target loads through it and I went to clean it and the patches keep on coming out a brown color and I let the break free clp set for about 25 minutes and I repeated this for 3 times and they are still coming out brown I used the bronze brush in between the patches and it doesent help but I looked inside the barrel with a bore light and it looks completely clean
very helpful sir
thank you so much ❤
Appreciate it pal 🎉
*I have a question*
Got mine used and the firing pin is the same as in the video but won't go off, pull the trigger enough and change the angle and it will. Would a 3.5" firing pin fix this?
Appreciate it bro
Great video, the guy that replied that he didn't here. The cap threading getting the clicking sound. I wouldn't shoot that gun. Cause the thread's Could possibly be damaged. I would have it checked out by gun Smith. I own 2 of these shotguns, a short one and a long 1. And you should be here in those threads lock on that Spring cap.
Nice video I appreciate it
Just picked this up, would you suggest oiling the action before taking it out for the first time?
You made a great choice. It is oiled at the factory so you can take it out of the box and shoot it. They do not require much upkeep.
@@norcalrambler101 awesome thanks
I believe in the manual it states you’re required to take off the factory oil and apply your own oil
@@fufu_33I would think coming from the factory, would be oiled with premium solution and ready to use.
@fufu_33 can you confirm this?
I just got the sxp black shadow and i love it👌
Good choice 👍 Super fast follow-up shots.
I just went trap shooting with that model. Good times
What kind and how often should I oil the exterior barrel? It seems to absorb the oil. Mine has the matte finish Thanks
After every time cleaning your gun with solvents, you should oil your gun. You only need a very thin layer of oil. We like Hoppe’s gun oil. A gun smith I know recommends Rem Oil (a mineral-oil-based formula with Teflon®). A matte barrel means it has a coating on it but most normal brands of gun oil will not hurt the finish. Thanks for the comment and I hope this helps.
@@norcalrambler101 Thanks!
I got
One for Christmas I haven’t use but do I have to clean it first? The cabelas guy tell me every gun has to be clean before use or maybe he was just trying to sale me a 140$ cleaning kit
I don’t know the recommended procedure but I did not clean mine before first use. Safety First Important reminder, always carefully check to be sure your weapon is Not loaded prior to cleaning.
Great video, thank you!
Thank you for watching.
I’m not getting that clicking sound when I tighten that final mart to hold the barrel in place.
If your not hearing that then your plastic piece at the tip of the tube in not sticking out, make sure it's protruding alittle then if right you will hear the click when your screwing the cap back on.
@@combatmachin0262 I got it after a few minutes. Thank you for the help.
nice work
Thanks
Most helpful
Bună ziua de pe ce sait să comandă șocuri externe pentru armă wincester sxp pompă cal 12?
Show more shotgun in the range 😊
Q linda arma amigos una belleza y elegancia
Gracias por ver
Thanks for sharing.
Thanks for watching!
Sucks that you have to remove the trigger group, in order to remove the bolt and forearm..
Manual says don't drop pin.
Hell yeah
Where the cleaning
Good catch. Thanks for the comment. Got caught up in disassemble and reassemble. We will have to make an actual cleaning video.
🇪🇨🇪🇨👍🤝
Gracias por ver