Avanti Airless Paint, Primer, & Stain Sprayer Kit Set Up
HTML-код
- Опубликовано: 11 сен 2024
- The Avanti Airless Paint, Primer, & Stain Sprayer Kit from Harbor Freight can go from storage to painting in a matter of minutes. Learn more here: hf.tools/www57042
Read the mixed reviews on this sprayer, but then again all the sprayers in this price range had some sketchy reviews. I decided to give it a try and it has worked just like it should. Not one hiccup. I'm about 30 gallons in and have cleaned it EXACTLY like the paperwork says and it has been a real blessing. And the majority of the paint was actually kilz and other drywall primer and worked excellent. Go ahead and buy a couple additional spray tips and spray gun filters just to have when you buy. I have been using the 515 just like it came with. I used a Graco one when the first one wore out and it didn't even last as long and cost almost twice as much $20 vs $38 .
Hope this helps.
Got my entire 1000sqft basement painted -- ceiling, wall and floor. It does require more prep work can clean up than rolling but for all the uneven nooks and crannies places, this is awesome. Do invest in more bits and an extension rod if you need to spray. You must clean the bits and take the filter out and flush the system with mineral oil or it will harden and it will be a pain to use the next time. Def worth the money.
Mineral oil?? Or mineral spirits??
Bought one and the machine worked great. The BIG Mistake that I made was to spray indoors: living room, dining room, and long hallway. The preparation takes a long time. You have to cover everything that you dont want to get paint on. When spraying the walls, an unavoidable mist (I guess people call it overspray) gets everywhere so you really have to take the time and prep everything carefully. Again, when spraying the machine worked really well. For me, I would only use it outdoors or only on new construction indoors where paint getting everywhere really doesnt matter. Bottom line: machine worked really well, but not for indoor painting.
you can turn down the pressure or you would have to get one that support low pressure tips. no matter what you will still get overspray with any airless sprayer
Turn down the pressure and use the appropriate tip. When it comes to spraying the work is in the prep. It’s a skill issue, not a hardware issue.
Indoor painting just cut and roll that’s easiest
I’ll let you know how it goes for my first time spraying walls indoors.
You do that.@@IknowGodIs
Here’s an idea, why don’t you include how to load the key into the spray gun because the paper directions are zero help
Totally agree
They turn key must be placed in the sprayer tip before it is hand screwed onto the gun. This effectively locks the key in place.
If you have the tip already on the gun, it won't go in.
My seal won't stay in
Dude! I agree they need to make instructions more clear
Harbor Freight sells Avanti Piston Lube Oil. I could not find any instructions on how to oil the piston and how often to do so.
Is there a piston lube port on this sprayer?
I’m watching this video for the 100th time and I still don’t feel safe or comfortable with it. Plus the warning sign that on every page that of the manual saying that returns are not accepted & warranty void if sprayer is properly cleaned (and the video does not show what how to properly clean the equipment)
Daaam this guy comfused the hell outa me.
damn these instructions feel like a math equation
The instruction video on the Avanti airless paint sprayer is awful first you prime then spray then prime however the instructor should have said "turn knob to prime again" because the first step had it in prime I had totally forgotten he at one point instructed to turn the knob to spray if he had only said turn to prime a second time or turn to prime again the user would not be confused.
All the people saying this is difficult to use, maybe things like this aren’t your speed😅
Very simple set up, similar to every other airless I’ve used.
If we had any experience setting up an airless sprayer we wouldn’t be watching this video.
Lol so u saying they should stick to rollers
Would love a video about doing thw atorage fluid (only comes with small bottle) and how to oil it.
All your other products have a setup video and a separate cleaning video. This one doesnt.
Getting the tip loaded takes a minute but once you get it youll have it figured out, and the priming seems intemidating but you have to actually do it ! Its not as complicated as it seems, and always rinse your machine when youre done,
Im never going back to rollers , what have I been thinking?
Compared to Krause and Becker?
Why not just prime it with paint and clean and clear it with water?
it's for testing when you first use it (or after having it stored). if something goes wrong with priming, now you have to deal with cleaning it out
I don't know if it "doesn't matter" the instruction booklet says to put the priming hose I to the paint bucket with the suction hose, but he kept it separate. 🤷♀️ I guess the different of "saving wasted paint"?
This looks so complicated just to start using the damn thing.
Most brands will have a similar procedure. I painted my privacy fence a few years ago. Took a few times but made sense once I did it.
Imagine trying to set this up for the first time after having a few beers. instructions unclear. got pp stuck in suction hose.
@@marioalbertog.8305 Gracias Mario!!
@@johne3999 Bwahahahaha!! 🤣😂
Never used one of these the video has one tube in water and one in paint and then said your ready to paint. Does the sprayer need to be running water while painting??
What about setup for oil based paint? 🤔
Same process using mineral spirits.
Where does the 4oz fluid go???
you prime it and keep it primed for storage to avoid any corrosion
Looks like the tip does not lock in and it does not stay until you attach the sprayer? We don't see any way to lock it in by itself... unless we are missing something??? No info on that. 😐
Doing this now. Once I switched to spray during priming, the machine goes into a seizure as I squeeze the spray gun. I’m trying to do this exactly like in the video.
Quick follow up. I got it working. It takes a lil getting used to. It uses a LOT of paint in comparison to their smaller gun(can’t remember the model number). Anyway, once I got going it was pretty simple. Overall, it’s not a bad investment.
i was told you cant use any latex paint that has primer in it like Beher paint. with primer....is that true?? it know Home Depot will not let you rent a paint sprayer unless it is pure latex NO PRIMER>..is this true with this unit>--thanks
That’s a great question I wish someone would answer
Just curious (I'm not an expert, just learning) but why would the paint having or not having primer matter?
@bishopp14 primer has an adhesive that kinda coagulates when cleaned with just water. But you can use soapy water and it works better. Not sure any other reason why.
I’ll just read the manual. Guy has me feeling stupid.
How many extra feet paint hose can I add ?
150 ft
What filter and tip do I use when using 100% acrylic Baer paint?
I’ve never owned a paint sprayer before so maybe someone can explain me this. Let’s say you’re using oil based stain and the system is dry and clean. What is the reason you have to prime it with mineral spirit first and then with stain? To me it seems like you can prime the system by putting both hoses in the bucket with stain and not waste any product.
Because the mineral spirits washes out any pump fluid or water to keep it from mixing with oil.
@@Illuminated.studios Gotcha. What if using water based paint, what is disadvantage of placing both hoses in paint bucket and priming with the paint ? Thank you.
@@googuser4040 For the same reason you're suppose to damp your paint brush before painting. It helps the paint flow because it could otherwise stick and dry up in the machine where the plastic is dry. If its wet the paint will take much longer to dry up in the machine.
What other tips for this? Rac X by graco?
How do u install the spray tip...it keeps falling out
Why don’t you cover how to install the tip?
I’m a Graco spray airless person. But the Graco gun filters do not fit these cheap guns. What’s the part number for the Avanti spray gun filter???
It's been a year since you posted this so you probably already figured it out but the SKU for the Avanti 60 mesh spray gun filter (blue) is 58560.
Can you use Glidden premium acrylic interior paint in these sprayers? Or is latex best?
yes
After I did all of this it sprays paint till the pressure runs out then the motor stays on continuously what can be the problem?
You have to prime the machine. Prime it for 10 seconds and it should stop
Why does this machine have wheels with no method of carrying a 5 gallon bucket?
Use both hands lol. What other rig around this price dose?
@@hlara2397 What is a "price dose?"
@@TheRetiredVeteran "Use both hands lol. What other rigs around this price does?"
Why is he wearing a mask and goggles to prime sprayer with water??
Covid? 😆
Bought one of these and it's defective right out of the box. It absolutely will not prime not matter what I do or try. And I've used an airless sprayer before. Pretty disappointed.
Ya get that thing worked out my friend? Or did ya just have a 200 piece of trash
@@Kevin12321 returned it as defective under warranty. Got a new one that works fine.
Avanti replacement spray gun filter… Part number? How can I order one
The Graco Gun filters do not fit these
Check harbor freight website.
The SKU for the Avanti 60 mesh spray gun filter is 58560.
No sale here. Looks confusing as hell.
When is the new airless sprayer coming out??
Slow down! Put a pause of time on the video in between steps! List each step in the description by numbers!
I love wasting gallons of paint before the water clears out during priming 😐
Doesn’t include how to install tip. Thumbs down
It's in the directions.
@@steelewheels1365 The directions are not clear. It says install the seal, but there is no picture how to install it. It does not fit.
Don’t purchase this unit unless you purchase the extended warranty. I bought it but didn’t get to use it until it was a few days out of warranty. There’s only a 90 day warranty for a reason. The motor seems to work fine; however, the rest of the machine is not worth the money- starting with the handle-junk right out of the box. Calling customer is useless without the warranty. They will tell you only what’s in the manual but keep you on the phone for a such a long time making you think they can give you new information, but they never do.
Spend the extra money and purchase the major brand.
This video would be better if he slowed down just a hair. He sounds like the guy from micro machines commercial.
Sounds like the worst sprayer ever! Setting it up only takes 10 days!
It does seem pretty complicated but from what I've read, all airless sprayers of this kind have similar set-up / cleaning procedures. Kind of a "nature of the beast" thing.
Building a nuclear reactor would be less complicated. Geeze!
Is there any way to control the spray quantity? When I use it it runs through a 5 gallon bucket of paint within minutes.
Minutes?
@@ghostwavewrider like 10 minutes
the pressure knob is how to control it. the higher the pressure the more paint (and overspray)
@@ricosrealm s it necessary to thin the paint?
@@ubacow7109 No.
I'll never buy that shit again
.i needed to unstop the part of the sprayer that u attach the hose to. The primer and spray knob is on that part...i have yet to get an answer from them junk making people
Huh??
You lost me at pushing the button 3 times, then all I heard was blah blah blah blah. Are all airless sprayers this difficult to use?
Almost the same , u get use to
they are all the same
Dose any one have one?
I have one on the way. I wanted it to Spray the exterior of my home. after reading deeper into the subject, I may return it for a Graco. That does Enamel Paint great, I might just keep the Above for indoor latex painting. You should go with Buying an extension for the hand sprayer for the above, after reading I have found 20 inch to be the most liked. Also read up on the tip you use....Okay Best of luck to you!
@@clarencejackson4004 thanks I just got mine today I will try out this weekend and let you know how it goes
@@clarencejackson4004 I just got it to compare but I hope it works price was not that bad
@@hlara2397 Great! Keep Notes LOL..I appreciate your Kindness. Oh, and it is the 10inch extension that gets those hard to reach areas. Best of Luck! H Lara
I just got mine 2/20/21 ..I will get it together , I am going to pick up the 10inch extension. I am Going to try mine Next week on a Bedroom with Latex. I will Post the results I have.
That was so confusing, not getting that one
The sprayer is fine. The video sucks. Doesn't include all the necessary steps. This video could get someone hurt.
This video is no help. When you start trying it. My machine won't turn off when his does. You sit for a WHILE! and nope.
I did, but is gun and is the worst thing I ever bought from Harbor freight don’t even bother
This machine is horrible and leaked at the gun, returning asap, made a mess in my bedroom, just rolling next time from the beginning.
The included guard is garbage, mine split first use. I used a Graco guard and it works great.
You just have to tighten it good and the leaks stop mine worked great painted the whole house and 300ft x 7 wall zero issues
@@user-qm5wh3ut7z wouldn't have helped mine, it literally pushed the steel part through the aluminum nut.
One of the worst machines I’ve ever used
this sprayer is a piece of junk... once it's put on spray it just ozz out of the nozzle
terrible instructions...
Terrible Video!!
Don’t purchase this unit unless you purchase the extended warranty. I bought it but didn’t get to use it until it was a few days out of warranty. There’s only a 90 day warranty for a reason. The motor seems to work fine; however, the rest of the machine is not worth the money- starting with the handle-junk right out of the box. Calling customer is useless without the warranty. They will tell you only what’s in the manual but keep you on the phone for a such a long time making you think they can give you new information, but they never do.
Spend the extra money and purchase the major brand.