How To Replace Ford Focus ST, FUSION, MKT, MKZ AND MKC EcoBoost 2.0L Turbo.
HTML-код
- Опубликовано: 2 авг 2024
- I am an Bmw Enthusiast, Auto mechanic, avarage Joe car guy who love Diy, Car Meets and Canyon ➡️ Thanks for Watching, And Thanks for your Support .
SHOP ⏬ FOR ALL YOUR BMW AND F80 MODS.⏬
www.vr-speed.com/ref/440/
BMW/Mini brakes bleeder: amzn.to/3vfdGgT
ATE TYP 200 brake fluid: amzn.to/3IdDXjg
F80 M3 Street/track Pads
Front, Ferodo Ds2500: amzn.to/3sdfMvL
Rear, Ferodo Ds2500: amzn.to/3pakvww
Red push start: amzn.to/3IlE6Br
VLAND TAIL LIGHTS: amzn.to/35pkuxy
www.f8xfreaks.com/?ref=H6D93L...
CODE: WEIWORPAYVEH for 10% off
burgertuning.com/?rfsn=622419...
2015 F80 M3 YMB
M Performance Exhaust, with secondary cat delete.
Dinan Stage 1 with Dinan cold air intake
H&R Super Sports springs
HRE Flow Form Wheels FF-04 20 X 9.5 F, 20 X 11 R
BMS Blow Off valves
I been looking all over RUclips and google for 2 weeks now trying to find where this turbo sits and here yall are posting this yesterday, thank yall so much! This is very helpful
I used this video to replace my turbo that had the same wastegate issue. I removed the wiper shroud but not the wipers themselves. From there, I moved the coolant expansion tank and loosened the upper motor mount to push the motor forward. I drained the oil but didn't drain the coolant. Removed all lines and pulled the turbo from the top with plenty of clearance.
For those reading this, use all new gaskets. Add your coolant and oil before pushing the motor back in place so you can see if any fluids are leaking. I had to do it twice because the coolant feed wasn't tight and I ended up taking a bath in it lol If everything goes right the first time, this will take 3-5 hours.
Informative, especially mentioning the wastegate issue. Looking forward to replacing my OEM with the PowerMax to keep that OEM+ feel. I'll be coming back to this when I do the install, thank you!
How long did it take to remove and install?
I am looking at doing the power max turbo this weekend. Very good video. Only question is when do you drain and add coolant in?
Drain first, make sure the engine is cold before working on it, and add last. Don’t forget to bleed the coolant system.