Unboxing & setting up the Anycubic Mono X2 | Replacing the LCD screen | Better than the Mono X?
HTML-код
- Опубликовано: 24 авг 2024
- Hello and welcome to Monocore 3D's Protips. In today's video, we will be unboxing and reviewing the Anycubic Mono X2. Because of a slight leak, we had to replace the damaged LCD screen, watch to learn more about the process.
Visit our website for more information: monocure3d.com...
------------------------------------------------------
TIMESTAMPS
00:16 Unboxing the Mono X2
03:58 Reviewing the Mono X2 in the print lab
04:00 Replacing the Anycubic Mono X2 LCD screen
06:08 Anycubic Mono X2 pros and cons, comparison with the Mono X
09:28 Anycubic Mono X2 slicing
10:50 3D printing with the Anycubic Mono X2
------------------------------------------------------
PRODUCTS
Monocure 3D Resins: monocure3d.com.au
Monocure 3D Deep Black Resin: monocure3d.com...
------------------------------------------------------
SOCIAL MEDIA
Facebook: / monocure3d
Instagram: www.instagram....
TikTok: / monocure_3d
------------------------------------------------------
MUSIC
Track: Y&V - Lune - NCS Release
Music provided by NoCopyrigthSounds.
Watch: • Y&V - Lune | Electroni...
Free Download / Stream: ncs.io/lune
Music: Perception by Bensound
www.bensound.c....
bit.ly/3BXMvKN
Video Link: • Bensound - Perception ...
The important question is: did the resin leak happen despite the screen protector, or did you forget to install the screen protector? I thought the whole point of the screen protector was to keep resin from getting into the printer.
I had the Anycubic Mono X2 for about 2 months now, it's a really solid machine, I even made a print comparison to my 40 Micron M3 Photon on a head scale miniature 2CM height and the result was not much of a big difference, probably I'll purchase another one , it combines between size and quality
FYI You can buy replacement hand-bolts from bunnings (if you're in oz). Mono X build-plate screw is M8 20mm (stock is 12mm but it still fits) and M6 40mm for the vat. I would presume these would fit the X2 as well.
Nice tip thanks Ben!
How do I reboot my x2 for updates I've looked everywhere
What settings do you have set for this printer? Are you using the settings that anycubic slicing software gives you from factory?
Settings depend on the resin you are using.
so should i fill my new vat with distilled water to test for leaks?
Doesn’t need to be distilled
@@Monocure3DProTips so would I just put in water and wait around 30 minutes to test for leaks or would it be instantly noticeable. Just my first 3 d printer and so i dont want sny mess ups
Geat video. What do you think compared to mono X 6k, is it the quality close?
I hate the plastic base! It fell apart after a couple on months!
X2 or M3? It appears that the M3 has better contrast. Is it that much better to sacrifice the size?
X2 IMO
I have both , and i did a comparison test of a small head scale 2 CM height , it's not a real difference especially if you changed the Mono X2 layer height to 0.03 - you won't see a difference with your bare eyes
may you share settings
How did you get the pmx2? I can’t find it at all in the anycubic software
You need to slice it
Lights Stopped working after 3 months & Customer service have told there are no replacement parts available for this printer, Be Warned!
Not surprised, they are discontinuing that model. As soon as they went to a plastic base, they lost me! I had to one had a broken screen, and the other the case broke!
Dam! I bought another one to replace it, I'm losing faith in these cheap Chinese printers.@@Monocure3DProTips
Sounds like we should avoid buying Anycubic products altogether due their extreme cheap-assery, to coin an apropo term.
😂
If you bougt you can call the center they send instant new one I know I work for them
Thanks for the tip
unreal - Monocure3d~ ))
Thanks Legend!