SCX24 - WILLY WAGON BUILD: WT MICRO BODY / LCG KIT, MOFO NANOBAM & ROCKWOLF ESC, MAZZ, DJCRAWLER

Поделиться
HTML-код
  • Опубликовано: 26 янв 2025

Комментарии • 86

  • @VermontScaleCustoms
    @VermontScaleCustoms 6 месяцев назад +2

    When you said the details of this were well defined you weren't kidding. I wish my 67 FJ would have been half as clean. Truck looks awesome. Definite ambulance vibe. The stocker wheel and tire look is spot on. Good video.

    • @bcochener
      @bcochener  6 месяцев назад

      @@VermontScaleCustoms Appreciate that! Yeah, this body was pretty crisp minus a few bridging lines on the rear door in some panel creases. Overall, I’m very happy with the outcome.
      -Finally got ahold of a 4DR FJ Cab only! Now I have to wait on Mazz to run me another V2 CC XL for it. I already have his boat sliders. Unfortunately they won’t work with his new V3… which is released as of today. It has a refined belly/Skid/frame shape at the mid section.

  • @MrsRabbit8
    @MrsRabbit8 6 месяцев назад +3

    Another awesome build! I've been waiting for another one. I could watch these every day.
    I'm trying to get the slider upright magnet mounts with longer sliders. Where do i get those? I assume WT Micro, does he sell those separate ever?
    Thank you for the video, i just ordered lights from that company that you mentioned, Evan Designs.
    Thank you for that suggestiimon.

    • @bcochener
      @bcochener  6 месяцев назад

      Not sure which sliders you need. I’ve gotten mine with the kits from WTM or from Mazz for the Cheat Code chassis builds I did.

    • @MrsRabbit8
      @MrsRabbit8 6 месяцев назад

      @@bcochener both of those sliders with the magnets I've looked for. They don't have them.
      I figured one must buy the whole kit to get them.
      I have a trx4m that i think I'm gonna go Gila with.
      Now to decide on which WT Body.

  • @Gibsonlife573
    @Gibsonlife573 2 месяца назад +1

    Add Servo is really really good

  • @24Yepp
    @24Yepp 6 месяцев назад +3

    Good timing on the wagon, my next roasted rig is a wagon!

    • @johnnyhotshoe1292
      @johnnyhotshoe1292 6 месяцев назад

      Sounds cool, I will be on the lookout!

    • @bcochener
      @bcochener  6 месяцев назад +1

      Excellent! I am curious to see the setup on it. Thanks for stopping into the live chat and for that FJ cab again!

  • @Rcmcgee1
    @Rcmcgee1 5 месяцев назад +1

    You know what I think? I think you should just give it to me... I have a rubber band, half-eaten jawbreaker and a tootsie-roll for trade! 😅
    In all seriousness, this has inspired me to start acquiring the parts and pieces to attempt such a build! Awesome job brother!
    P.S. I still think you should give it to me, lol.

    • @bcochener
      @bcochener  5 месяцев назад +1

      @@Rcmcgee1 glad to provide the inspiration brother!

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад +1

    Dude I'm telling you that set with the rocker on their the alien compound that tire looks so damn good and so does the rim I think that's the way but I don't know they all look so good

    • @bcochener
      @bcochener  5 месяцев назад

      Right there with ya. Hard decision… that’s why I do multiple sets! Lol

  • @garyclark24
    @garyclark24 6 месяцев назад +1

    I am constantly amazed at your builds Brian, and I am impressed with all the wheel combos you come up with, I don’t know how you find’em!

    • @bcochener
      @bcochener  6 месяцев назад

      @@garyclark24 Appreciate that Gary! I have a box full of wheels… I form most of my builds around a wheel usually. Not always. But it’s a good starting point. Wheels and tires are my addiction for sure. …now adding WTMicro bodies to that list! 😂

  • @DanPRC
    @DanPRC 5 месяцев назад +1

    Very nice looking build! I used 1/10 Pit Bull tires back on my 1st gen Scx10. I wish they made some 57 or 60mm for micro but those 50s looks good on those builds.

    • @bcochener
      @bcochener  5 месяцев назад +1

      Yeah they definitely fit the bill on this one. That Alien compound is super sticky! Maybe one day they’ll upsize. At least they’re bringing out some new 1.0s now. Still small, but more to choose from is always good!

  • @REACTIVETERRAINRC
    @REACTIVETERRAINRC 6 месяцев назад

    Stunning build bro absolute build legend 🤘

    • @bcochener
      @bcochener  6 месяцев назад

      Appreciate that Adam!

  • @bghobbies1
    @bghobbies1 6 месяцев назад +1

    Dude you killed the wagon! Was fun watching you go through all the same struggles. That truck is a tight build but totally worth it! Where do I pick up the panel line filler? I tried black acrylic with a little water. But it messed up the whole base coat.

    • @bcochener
      @bcochener  6 месяцев назад +1

      Man I appreciate that! It was definitely a challenge with that interior tray. Already want to build another version of this one.
      - man for that liner, I haven’t been able to find it either. Someone else was asking me about it. I’m almost out myself… I bought this ages ago at Hobbytown. I’ll let you know if I find a new water based option. Sure makes cleanup easy!

    • @bghobbies1
      @bghobbies1 6 месяцев назад +1

      @@bcochener Thanks for the information. I will check some of the local stores. Maybe there will be some old stock. Pretty sure with WT you need to collect them all!! About ready to just put Matt on my bank account! Haha

    • @bcochener
      @bcochener  6 месяцев назад +1

      @@bghobbies1 😂 I feel ya! I’m chomping at the bit for the Xtra cab Willy Truck.

    • @bghobbies1
      @bghobbies1 6 месяцев назад

      @@bcochener I have one! Few build to get done before I start it tho.

    • @bcochener
      @bcochener  6 месяцев назад +1

      @@bghobbies1 I hear ya! I can’t wait to see what you do with it! Cheers!

  • @familykrawlers
    @familykrawlers 6 месяцев назад +1

    That rig looks Awesome Brother!!! I never seen it in a wagon

    • @bcochener
      @bcochener  6 месяцев назад +1

      Thanks brother. Yeah, it’s a hard one to grab. That and the Jeep Brute body.

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад +1

    Definitely getting one it looks fire on the cheat code

    • @bcochener
      @bcochener  6 месяцев назад

      @@Gibsonlife573 yeah it does! I may do another at some point on one.

  • @garyclark24
    @garyclark24 6 месяцев назад +1

    Looking forward to this build!

    • @bcochener
      @bcochener  6 месяцев назад

      @@garyclark24 it came out gorgeous! Cheers Gary!

  • @sammyboswelldirtybrc7580
    @sammyboswelldirtybrc7580 6 месяцев назад +1

    That’s bad ass Brian its a 😍panel wagon 🔥🔥🔥😎👍

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад +1

    Man I don't know that's a stiff decision dude I think the second set looks super good but also the third set looks pretty good

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    That thing is sick I mean man that is like model material the last set of tires look so good it's like you said showroom floor

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад +1

    Definitely we go with the cheat code

  • @REACTIVETERRAINRC
    @REACTIVETERRAINRC 6 месяцев назад +1

    Mud paws for me ATM are my favourite

    • @bcochener
      @bcochener  6 месяцев назад

      I’m really digging their farm truck look. Love the smaller size too.

  • @MrsRabbit8
    @MrsRabbit8 6 месяцев назад +1

    Hey I've got a question on the receiver.
    In a previous video you opted for the fs2a-4ch, The ones that come already soldered have the pinouts going the other direction, but yours is more compact and better so I'll have to solder it myself.
    Also, looking on the websites, these are compatible with the GT5 protocol but they appear to be for airplanes... including this AR52-A2+.
    I assume you wouldn't use it if it wasn't legit, but why are they only listed for airplanes and not surface?
    These mini receivers seem to have some issues with the servo, so I'm thinking about the Furitek instead.
    One thing is that it says that the telemetry is not able to be used with the Python Pro. Will this cause me issues???
    Thank so much, have a great week!

    • @bcochener
      @bcochener  6 месяцев назад +1

      @@MrsRabbit8 shouldn’t matter what they list the RX’s for. They can be used for any RC. As far as the mini 4CH, I haven’t ever had any issues with those.
      Only issue I have ever had was with that AR-52 A2+ in the Willy Wagon, but I think that was servo causing it somehow.
      Haven’t used any of the Furitek radios or RXs, so no help there.

    • @bcochener
      @bcochener  6 месяцев назад +1

      @@MrsRabbit8 soldering is the way to go on that 4CH. I agree the pins over the board is such a space saver. I was nervous at first, but now I solder them up in a minute or 2 easily.
      I slather the pins (once set in the holes) with flux, the. Go to town. If you get a blob connecting 2 pins on accident, just run the hot tip between them and remove it.
      -I also usually bend a pin or 2 slightly out of alignment before I fit them in the holes. It provides tension and they stay put for that first solder.

    • @MrsRabbit8
      @MrsRabbit8 6 месяцев назад +2

      ​@@bcochenerawesome! Thank you, i really appreciate your help and replies.
      I've shortened servo wires before and re-soldered in the servo on a micro, it was hard but i got it first go.
      So the issue resolved itself with the servo rx problem.
      Hey, you ever use the magnet wire connect method for body lights?
      How do i help support your channel? My favorite channel.
      You rock, dude! Badass!

    • @bcochener
      @bcochener  6 месяцев назад +1

      @@MrsRabbit8 I have not used the magnets for lighting. Cool idea though. I’ve seen it on a few 1/10 scales.
      For now, I guess just a thumbs up and comment is about all you can do. I’m not monetized or anything at the moment. I sure appreciate your support!

  • @nickerbocker759
    @nickerbocker759 6 месяцев назад +1

    I hope he comes out with just interior options. I’d love an interior for my Willys.

    • @bcochener
      @bcochener  6 месяцев назад

      That would be sweet. You could always contact WTM through Etsy and ask him.

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад +1

    I don't know if you have checked out the new Knuckles from Deluxe Fab but I highly highly recommended you know I build a lot of high-end performance I'm always looking for performance but I'm definitely going to pick up one of these wagon dear bodies that thing is stupid clean and I got the new Mass cheat code definitely thought about putting it on there and just customizing it to that chassis and another product that you're talking about Poor Boys RC servo very very very very good

    • @bcochener
      @bcochener  6 месяцев назад

      @@Gibsonlife573 I’ll have to look into those knuckles. I’m pretty pumped about the new CC V3 as well. Need to pick one up soon. Yeah, Poor Boys seems to be pretty good stuff at a decent price. Those deep dish wheels they have are 🔥!
      - oh and definitely get a wagon body!!!

  • @asian-ugrclab2367
    @asian-ugrclab2367 6 месяцев назад +1

    Awesome Build! 😎
    If you don't mind me asking, what truck stand is that you are using? TIA!

    • @bcochener
      @bcochener  6 месяцев назад +1

      @@asian-ugrclab2367 thank you! That stand is by Ramp Crab. They are awesome little stands! Find em on Amazon.

    • @asian-ugrclab2367
      @asian-ugrclab2367 6 месяцев назад

      @@bcochener - you're very welcome and thank you! 👊🏾😎

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    That one set of tires done so darn good to be on that slick plastic like that and just to pull itself up without a problem what did you say them worm

    • @bcochener
      @bcochener  5 месяцев назад

      Pitbull PBX tires

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    It's the BBC off of that ESC and what it is I think is what I found out what I've heard is it's a voltage protection that they put in there but a lot of the times it's hard to get really premium Bec

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    Boy I didn't realize how loud that little Nano bam is with the transition I guess is that what makes it a little bit louder as far as like the transitional gear

    • @bcochener
      @bcochener  5 месяцев назад

      it is actually really quite with that nylon transfer gear. I think once you put the body & interior it makes it much loader. resonates more. I noticed that in my metal Rippers. LOUD because of the enclosure.

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    Radio link set me a different micro receiver cuz I had burnt like three or four of them up and this one here still has the trouble what you just proved right there is the bigger receivers work okay but the microbes cannot handle that pressure I never thought to try that you know thank you so much I'm going to holler at radio link and tell him about this I know you're using GT5 but it helps to understand the other ones also

    • @bcochener
      @bcochener  5 месяцев назад

      yeah, it always comes in handy having a bunch of different components on hand to swap in. makes troubleshooting go pretty fast. Only ever had this issue with that 5 channel micro as far as the shut down. I'll just have to see how that servo does in real world use as far as fade. Seemed fine after the RX swap pretty much.

  • @SickHP1963
    @SickHP1963 6 месяцев назад +1

    Can you please tell me where you get the water based panel liner. I’ve searched everything and I can find nothing, but a different brand in the Philippines and they are out. I would really appreciate it and thank you

    • @bcochener
      @bcochener  6 месяцев назад +1

      I’ve searched recently as well and haven’t found it. I got this bottle at Hobbytown quite a while ago. But I am running low, so was searching. I’ll let you know if I find anything.

    • @SickHP1963
      @SickHP1963 6 месяцев назад +1

      Thank you, man I put in every combination of what’s on your bottle and got nothing. I did find “gundam” stuff like pens not really interested in that route. I’m getting ready to do two builds one with the wt micro fj 4 door and a wt micro Willy’s and really want to do them right. I’ve watched quite a few videos you’ve made and the panel lining just sets it up perfectly makes all the difference. I guess I’ll have to clear them and panel line with Tamiya panel liner then clean and Matt clear the bodies. Please if you do find water based panel liner mention it in one of your next videos I watch them all. Thanks!

    • @bcochener
      @bcochener  6 месяцев назад

      @@SickHP1963 will do. If all else fails and I can’t find any, I was just thinking any of the water based washes may work. I’d want to test that first though. The washes are meant to leave a stain.

    • @SickHP1963
      @SickHP1963 6 месяцев назад

      Well that’s just it the only water based washes I’ve found are in the Philippines and the black has been out the last month. I will try it if it ever comes back in stock. I’ll comment in a video of yours if I’m successful in finding any. I’ve bought a few models planes and cars gonna test the Tamiya panel liner and see if clear works on the ( can’t remember if it’s acrylic or enamel) to clean it then Matt clear it and see how it all acts together. I’m a bit scared it’s gonna be a mess, but gotta try after seeing your work I’m after that look.

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад +1

    Tell you I don't know if you have tried them or not big kid tiny trucks makes a damn good ESC bro I mean it's really good and the Wi-Fi link you can hook it up and go right to your phone and do all the programming the updating so all you have to do is unplug the wire from the receiver plug it into the Wi-Fi link you don't have to tear it all apart none of that

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    That is sick Bro I want to know I can't remember how you do that dry brush you should do a breakdown on your painting just show us exactly how you do it also bro I have two sets of the long hot racing oil shocks right I can't seem to get them to work not for the stuff that I build anyway it seems like they find up but I know you really like them would you be interested in them I think one of them is missing the Spring Cup though just one

    • @bcochener
      @bcochener  6 месяцев назад

      @@Gibsonlife573 thanks brother. Man, o. The HR shocks, make sure your bottom connection is t too tight. I’ve had it pinch the eyelet not letting the shock rotate freely if too tight. Other than that, no issues with mine. You can hold onto them, maybe you can get them to work….

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    Have you checked out the new Servo where they built the bracket into the bottom of it to bolt straight to the axle no Servo tabs nothing like that I just can't seem to push myself toward that because it's like it only fits certain axles

    • @bcochener
      @bcochener  5 месяцев назад

      yeah, I do think it could be handy for some type builds. Especially stock chassis builds. I don't like that you lose the F/R adjustability you get with a Mofo servo mount. I love the rear exit cord. I saw NSDRC came out with a conversion back plate to do the same to their RS100.

  • @millersminis4003
    @millersminis4003 6 месяцев назад +2

    What is up? Hope all is well

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    What if you had a kicked skin such as the cheat code V3 and it put that motor way down would that work with that you think

    • @bcochener
      @bcochener  6 месяцев назад

      @@Gibsonlife573 not sure until I try it. It’s too low for the typical forward micro motor mount. I know the skids on the new CC can really tuck it though.

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    I think we all shoot for that big steering angle I've had the EXO shafts I've had every knuckle on the market and I broke several of their actual shafts but then they beat them up a little bit and sent me a pair so far then their have not broke but telling you this I really really really really really like the deluxe Fab shafts they got a little bit more thread so if you are trying to put a little bit of an extension you can still use a regular wheel nut and I know how you shave down the ears off of the brass heads I do the same thing you know so you don't get no binding but them shafts and their new Knuckles are insane together I got a video a little short I put up evil give the iso axles a run for their money

    • @bcochener
      @bcochener  5 месяцев назад

      I gotta look into those Delux Fab ones. The Exos S8s keep being sold out all the time now. lol.

  • @jmrcs2935
    @jmrcs2935 6 месяцев назад +1

    hello nice looking

    • @bcochener
      @bcochener  6 месяцев назад

      Appreciate that! Cheers!

  • @chalinp4886
    @chalinp4886 5 месяцев назад

    Who makes this body do they make it in 1/10 1/6

    • @bcochener
      @bcochener  5 месяцев назад

      @@chalinp4886 WT Micro on Etsy. Just in 1/24th.

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    Hey would you be interested in building one just like that for somebody I think I would rather have it on Super 8 or X15 so I got a set of each

    • @bcochener
      @bcochener  6 месяцев назад

      Sorry, no time for building commissions at the moment.

  • @REACTIVETERRAINRC
    @REACTIVETERRAINRC 6 месяцев назад

    Yeah pitbull not over here yet in the UK.

  • @Carlos-ip2ir
    @Carlos-ip2ir 17 дней назад

    Buzz with the beeping wrong direction wires ot should just clean beep

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    You're Brown and out the ESC cuz it's shooting for all that voltage from that Servo is what it is a lot of little ESC same to have that problem I guess it's a protection thing they say from a voltage Spike but if they take that off there then your BEC will run at its full Prime but also you take a chance and you know burning stuff up they say I would much rather be able to run a full Peak voltage you know have all that power torque

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    Play some that's another thing I have a bunch of in spare rims and wheels I got a set of mass is newer Wheels with all the scale Hardware I don't know if you'd be interested in them they've never been used I mounted them up just too much you know for me and I know you're into the scale detail I'm going to be getting rid of a bunch of my stuff that I don't use cuz it's just piling up I also have a set of I believe they are Power Hobby 42 or 44 mm tires brand new in the package I don't know if you have Facebook or if there's a way I can get in contact with you though

  • @justthatguy2199
    @justthatguy2199 5 месяцев назад

    Please build me one😍😍😍

    • @bcochener
      @bcochener  5 месяцев назад

      @@justthatguy2199 if I only had time to build em for people…. Cheers!

  • @Gibsonlife573
    @Gibsonlife573 6 месяцев назад

    It sucks man that sucks you want to have that all that speed from that Servo and the ESC browning out I'm just going to be honest to only one that I have found that does not brown out was the fury take python Pro they say you want your micro receiver to be able to handle at least 12 volts

    • @bcochener
      @bcochener  5 месяцев назад

      I always loved the Furitek Ultimates. Never had any issues with them. I have one Python and one Pro, great but I hate the larger size of them.