FORD 1.6 TDCI / PSA 1.6 HDI Timing belt and water pump replacement 2012 Cmax
HTML-код
- Опубликовано: 4 янв 2022
- Step by step guide on how to Replace the Timing belt & water pump on a Ford C max 2012 model 1.6 diesel TDCI. Engine code T1DA
Same procedure applies for the same engine in the Citroen, Peugeot, Volvo & Mazda etc. In the Peugeot & Citroen the same Engine classes as the 1.6 HDI. Also same as 1.4 HDI / 1.4 TDCI / 1.5 TDCI Engines
Any Donations to help Support my Channel are much appreciated.
Donate via Paypal - paypal.me/diydaly
Check out the diagnostic machine I use - diydaly.co.uk/products/phoeni...
Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site)
Timing belt kit eBay - ebay.us/vkQZhf
Timing belt kit amazon - amzn.to/3FMZqhI
Auxilary belt (without aircon) Ebay - ebay.us/WGxbhK
Auxilary belt (with aircon) Ebay - ebay.us/RuIjWR
Timing pin locking kit - diydaly.co.uk/products/laser-...
Flywheel locking tool - diydaly.co.uk/products/flywhe...
Anti freeze - ebay.us/4IUKSe
Tools used :
1/2” 18v Dewalt impact driver - amzn.to/3e2Uff2
Milwaukee 3/8 Drive Mini Impact driver - ebay.us/Pg8ilg
Milwaukee Battery ratchet - ebay.us/zlfRSl
Trim clip tool set - amzn.to/3pcUl9N
Digital torque wrench - amzn.to/34kpI9y
Socket set - amzn.to/3eGx2Ak
Ring Inspection Lamp - amzn.to/3gGWHcG
Torque Wrench - amzn.to/2VZ4CKu
Torx Socket set - amzn.to/39UTWCw
1/2" Air impact driver - ebay.us/3LRqLL
Spanner set - amzn.to/2DlwUZm
Allen key set - ebay.us/cwSiXO
Pry bar set - ebay.us/3oVXD4
Trolley jack - ebay.us/8kFklk
Torque settings :
Crank pulley = Stage 1 - 35NM Stage 2 - 190 Degrees
Tensioner = 30NM
Idler pulley = 37NM
Engine mount (horizontal bolts) = 55NM
Engine mount (vertical bolts) = 48NM
Water pump - 10Nm
Check out my other timing belt replacement videos:
• Timing Belts & water p...
If you found this video useful, please Like Share and Subscribe to help grow the channel, and never miss any future content. ruclips.net/user/gavdaly?...
Please also check out my website - www.diydaly.co.uk where you'll find top quality goods, tried, tested and recommended by actual mechanics.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. This doesn't effect the price you pay! - Авто/Мото
You sir have reignighted my faith in decent human nature. What a pleasure to hear and watch a concise informative and frankly delihtfully entertaining as well as instructional piece of work. The editing and content is excellent down to the last detail. Power to you sir, from a delighted 70 year old retired man of the spanner world. Looking forward to your other videos. Cudoss
Good video. I've done one of these belts before, but wish I had seen this first as it shows great detail.
Great video, very precise and detailed. I wouldn't dare to start because I'm just an amateur, it's a job that requires a lot of experience. How nice it would be if all car mechanics were this conscientious and precise, I need a mechanic like that too.
Thanks for watching!
Excellent video,one of the best I’ve seen. Just this, there is a drain plug for the coolant on the back of the engine,a plastic plug with a locking clip, I drain the coolant there. And you mentioned it, but I mark the old belt with paint marker,and copy paste this on the new belt, it gives confidence that everything is timed correctly. But hey, great job!
Thanks for the comments and tip about the plug.. not a bad idea marking the old belt and transferring it over! Like you say it’s a nice reassurance 👌👍
@@diydaly Wow what can I say, I have seen many a video of different people changing timing belts on different cars, but I must say this is one of the finest videos I have ever seen, because you explained everything as you were going along and camera work was top class, you didn't leave anything out and so easy to follow you, absolutely brilliant video and well done and a pleasure to watch, cheers and have a good 2024,
@@roisindonoghue4304 thanks ! Makes it all worth while hearing feedback like this! 😁
Absolutely invaluable video. I can’t thank you enough. I’m so impressed with the detail you put into it.
With your help I changed the cambelt, tensioner, idler and water pump on a Fiesta 1.6TDCi without a hitch. Whilst there I did the fan belt and it’s tensioner too. On this model Fiesta there are some fiddly wires in a plastic casing across the lower cover and an extra cover over the lower pulley and fan belt, plus the airco pump, but aside from that everything was identical. Incidentally, on the Fiesta it’s easiest to simply pull off the bottom hose to drain the coolant. It all drops straight into a bucket from the other side of the car with zero splash and won’t soak the floor you have to lie on to do the job! 😊
👍👍 nice one glad to hear it!! Thanks for the comments 😃
I needed to change the cambelt on a Volvo S40 1.6 diesel which shares the same engine. There are lots of videos about this job, yours is the best, so well filmed and explained. Your narrative is excellent. Whilst down there so to speak, I discovered a leaky crankshaft seal which I changed. I've yet to do the dreaded engine start, but I've no concerns because I watched your video. Torque settings list very useful. Cheers!
Glad it helped, thanks for the comment 😁
PS
I have now changed the cambelt on my C-MAX following your guidance, and has done 64,000 miles, and as it is 11 years old, and also changed alternator belt.
I borrowed a high impact wrench from a garage to tighten the crankshaft bolt and the mechanic advised also putting some locktight on the threads.
The 2009 Ford Focus Estate 1.6 cambelt was changed at 98,000 and 165,000 and at 213,000 miles is still going. strong.
Many thanks again.
Pat
👍 glad to hear it
Great Video, as I'm in Norway I was quoted £1000.00 for the job. I'm on a British pension so i will now do it myself..your video will keep me right I'm sure..thanks,
You can do it! 👍👍
I’m doing my transit connect in the coming weeks. Thank you for the excellent detailed video. This is one of the best videos I’ve ever seen for a timing belt job.
Nice one , glad it will help .. thanks for the comment 👍
This video was excellent. Step by step and very clear, with all the supporting information included in the notes. Thank you
You're very welcome! 🙌
Thank you very much for this excellent video! I changed the timing belt on my 2012 Focus today and followed your instructions. Everything worked exactly as explained :)
nice one, glad to hear it helped! 👍👍
how did you get the crankshaft bolt of.?
@@geraldjones6246 I borrowed a strong impact driver from a friend, worked like a charm. Otherwise you could use a flywheel locking tool as mentioned in the video
Brilliant video. The most comprehensive one I've ever seen for this engine. Thanks
👍👍 thanks , your comment is much appreciated 😁
The best tutorial !!! Great camera views, excellent explanations. Even if I'm afraid to do it to my Focus 1.6 tdci i have learnt a lot. Thanks and greetings form Italy
👍👍 thanks for the comments, glad you enjoyed it
Absolutely brilliant video pal. You gave me the knowledge to do it myself. All went spot on. Transit connect 2014 mk2. Keep up the good work 👍
Nice one , glad it will help 👍👍
Spot on with the guide. Nice and easy to follow. Did mine a couple of weeks ago and set the tensioner dead centre, after the rotations by hand it had crept up slightly but barely noticeable. Had a whine when the revs increase ever since. Hoping it'll disappear eventually, struggle to believe the belt is over tensioned. Had it before when I did a 1.7 DTI astra and it eventually disappeared 🤞
👍👍🙌 thanks for the comment
Great video! It looks exactly the same as when I did it on my Peugeot 206 1.4 HDI. It is not too difficult and I am now happy to do it on my Focus. Thanks!!
Thanks! yeah its near enough the same 👍
Cracking video - clear commentary and instructions - great camera work and capture of the essential details. Appreciate your time and effort in creating this content - thank you. New sub 😉
Nice one , thanks for the sub👍 always nice to hear positive feedback 👌
Great video, thank you. Just done same job on 2013 Mazda 3 1.6 diesel, your video very helpful.
Glad to hear it! Thanks for the comment 👌👍
I know there's a lot of hdi tdci timing belt videos on you tube ,But this is the best one on the entire net , this guy just has it ,thankyou, Iam still not doing it ,I can't bend down now but very good to know ,1 thing do they not use gadget sealer on the water pump anymore ,👍
Thanks for you comments , feedback is always appreciated! 😁😁👍, some do still use sealant but most either use a rubber o ring or metal crush type gaskets now 👌
The best video on youtube exellentl.,well explained through out any novice could tackle the job because the tips you give would give anyone the confidence.I am a retired H G V and car mechanic so i have the experience and knowledge to give you top marks for the best explained video.👌👌.
Thanks! your comment / feedback is much appreciated! glad it will help out 👍
Excellent video. Followed everything the way you done it. You've saved me a couple of hundred quid, many thanks
Nice one , glad to hear it helped you 👍👌
Absolutely brilliant video.This is the perfect example of how a youtube video should be produced. so many awful videos on here nowadays. I have been a mechanic and MOT tester for many years but always good to take a look at these videos If I'm working on something for the first time. Thank you and well done.
Glad you enjoyed it! Thanks for the comments! Makes it all worth while 😁
Thank you for the video! It opened my eyes - I was looking at Ford Tourneo Connect, Citron and Peugeot mini vans, however, after seeing your video, I changed my mind...
👍👍
Ich kann zwar kein Englisch, aber diese Video ist perfekt. Und der Mechaniker macht einen super Job.
👍👍
Another really helpful video with really clear, well explained instructions - cheers 👍👍
👍👍 thanks 🙌
Absolutely professional I like your videos tanks soo much from Spain
Thank you very much!
Excellent video Gav - you make it look easy !!!
Thanks for the comment!👍😃 lol not bad once you've done a few
Best explained detailed video on cambelt iv seen. Keep it up your the mate.
Your comment is Much appreciated! thanks 👍👍
Loved the detail and time you took in this video, brilliant 👍🤣
Thanks 👍
as others have said thank you nice clear video i used it to change cambelt on my focus today
Glad it helped! Thanks for the comment
Your video’s are fantastic thanks for taking the time to share them
Regards Eric
Glad you like them , thanks for the comment, much appreciated as a small YT channel! 👌👍😁
Ti ringrazio moltissimo per il video, uno dei migliori.devo fare lo stesso lavoro sulla mia focus ed è una guida utile che mi ha dato molte indicazioni importanti.👍
glad it helps, thanks for the comment 👍
Nice ,very good demonstration
Like a pro I love it.
Thanks
Thanks , appreciate the comment 👍👍
Thank you so much for this video! Now I feel well prepared for this.
You're very welcome!
Best video I've seen in ages. Excellent job.
Glad you enjoyed it!
First class tutorial, clear with main points emphasised. Good filming helped. ta.
👍👍 thanks for the comment
Thanks for the video , again spot on great tutorial , great guide for home mechanic , 👍😊 please keep making videos , from Tony from bedfordshire ,
Thanks Tony! you comments much appreciated! 😃 there will be plenty more to follow 👍👌
just watched. excellent clear and precise video. Doing mine soon.
👌👍 glad it will help
Thankyou for this video bud this has just helped me out loads through the day today 👍
Glad it helped👍👍
Very concise instruction and excellent videography.
Thank you kindly!
Great video! Everything clearly explained and super camera work. Going to do mine tommorow.
Nice one , thanks! Feedback always appreciated 😁
How did it go .
@@patrickkparrker413 Hi. No problems at all. Took about three hours to do with no rushing.
@@iwadrian Just found out why my traction light stays on , steering sensor behind the steering wheel .
@@patrickkparrker413 I had same problem with my audi A4, years ago.
I’m late to the party here however your tutorial is bang on!
Thanks rob! Nice to hear your feedback! 👌👍
Great video, just resealing the cam carrier so time to do the belt, very clear and great video BTW, super clear and easy to follow, thank you very much 👍👍 cam carrier oil leak, I think I took 15 parts off before I got anywhere I needed to be!!! What a crazy design!!! 😳 Deffo not for the feint hearted!!! Wasn't sure about the timing etc, but you explained it so well!!! 👌👌👍👍
thanks for the comments! much appreciated 😃👌 glad it helped 👍
@@diydaly it's just a shame it's made by citroën/Peugeot, now I know why the whole thing is over complicated!!! 😂
@@moosecake30 haha yeah thats about right!
Great video, I did my Ford Fiesta econetic cambelt and Water pump following this video. Great work mate and thank you 😍👍🏼
Glad it helped! 👍👍
Awesome video mate perfect instruction on every detail thankyou for this ;-)
Thanks for the comment , much appreciated as a small YT channel 😁👍👌
Almost made that look too easy, be running yourself out of business 😂 thanks for the excellent instructions! 🤙🏻
Thanks for the comment , glad to help 👌👍
Great easy to follow video. Many thanks
Thanks 👍👍
Cracking video best I've seen thanks
Glad you enjoyed it 👍
Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site)
Check "Car Parts for Less" - tidd.ly/2LNEwIn (use discount codes on site)
Timing belt kit eBay - ebay.us/vkQZhf
Timing belt kit amazon - amzn.to/3FMZqhI
Auxilary belt (without aircon) Ebay - ebay.us/WGxbhK
Auxilary belt (with aircon) Ebay - ebay.us/RuIjWR
Timing pin locking kit Ebay - ebay.us/RoxzyJ
Flywheel locking tool - ebay.us/3NfYdU
Anti freeze - ebay.us/4IUKSe
Tools used :
1/2” 18v Dewalt impact driver - amzn.to/3e2Uff2
Milwaukee 3/8 Drive Mini Impact driver - ebay.us/Pg8ilg
Milwaukee Battery ratchet - ebay.us/zlfRSl
Trim clip tool set - amzn.to/3pcUl9N
Digital torque wrench - amzn.to/34kpI9y
Socket set - amzn.to/3eGx2Ak
Ring Inspection Lamp - amzn.to/3gGWHcG
Torque Wrench - amzn.to/2VZ4CKu
Torx Socket set - amzn.to/39UTWCw
1/2" Air impact driver - ebay.us/3LRqLL
Spanner set - amzn.to/2DlwUZm
Allen key set - ebay.us/cwSiXO
Pry bar set - ebay.us/3oVXD4
Trolley jack - ebay.us/8kFklk
Torque settings :
Crank pulley = Stage 1 - 35NM Stage 2 - 190 Degrees
Tensioner = 30NM
Idler pulley = 37NM
Engine mount (horizontal bolts) = 55NM
Engine mount (vertical bolts) = 48NM
Check out my other timing belt replacement videos:
ruclips.net/p/PLDTPJANi9HjoaO_bcawhaGNVnFCg1HWCV
Splendidly done, squire and great photography in a Very confined area!
208 1.4 even worse! 😂
😂👍👍 thanks
Very well demonstrated mate, same job on a 2016 transit connect also
👍👍 thanks mate
What a fantastic video fella well done, best ive seen
Glad you enjoyed it , thanks for the comment
Thanks for video!
It really helped me
Glad to hear that! Thanks for the comment
Good Work Tank you For this top vidéos 👍👍👍
Thanks 👍👍
Great video. Thank you
Job is done, thanks, good man!
Nice one 👍👍
Awesome video 👍 👏 Thank you for the info and tips and for sharing this excellent video 👍👍👍👏👏👏✌❤🍀☘
Thanks for the comments , much appreciated as a small YT channel 👌👍 glad to help 😁
Teşekkürler büyük usta türkiye den selamlar.
👍👍
Nice job, really good video 👍👍
Thank you very much 😃
Glad to help , thanks for the comment 👍👍
I have no replaced the timing belt and pulley and tensioner on my 2010 Grand C-max.
And i have replaced the drive belt.
I did replace the thermostat housing but the temp gauge inside the car will not stay on normal temp.
Only up to the second line and then drops down to 60+.
The engine and coolant temp seems normal and nice warm but i think i should have used another brand than i put in.
Esen is the brand of the thermostat housing now but i think i’m going to replace it with a Gates thermostat housing. Better quality on Gates than Esen maybe?
Or maybe i should also replace the air filter and rhe MAF sensor.
Over 1,5 year since last service on air filter and cabin filter.
Yes i did replace the water pump and coolant also. And i did bleed the system and started the car and almost evertthing perfect beside the temp problem.
I have used a INA kit on drive belt and timing belt and water pump and Valvoline coolant.
When you said you are taking the cam pulley off with an impact driver I was like there is no way a 1/4 hex bit will undo that, but then I realised you meant an impact wrench lol 😄
Haha I have a few different names for them! Just comes out naturally sometimes without realising what I’ve said 🤣 off camera I just call it the buzz gun 🤣
Great video thanks started this job tonight after belt teeth went this morning. Probably have to have the head off
Thanks .. arr noo thats not good 😖😖
Outstanding instructions! And you have to know, I'm Swedish and not used to that lingo ;-)!😅
Thanks! 😃 positive feedback always appreciated 👍👍
THX FOR THE BEST VIDEO FOR THIS JOB!!! helped me big time! ..locking tool is not fitting where you showed. i think you ve to dismantle the starter motor(like the 2,0 tdci), but thats a pain in the ass cuse it´s on the back of the engine(1,6 tdci 2011 T1WB). ..anyway 5 gear and step on the break, battery impact wrench. job done ...cheers and love from austria
👍
Very usefull!! Thanks Bro!!!
👍👍glad to help
Brilliant Video!!!
Thanks!
Super video.
Great video! Very helpfull! cheers :)
Glad it was helpful! 👍👍
THATS PERFECT nice one and think you
👍
whole information ; good job :)
Thanks! 👍👍
Thank you very much 🎉
👍
Awesome! 👍
Thanks! 👍
Great video, doing one today, I don’t have the luxury of a lift though 🙄.
👍👍 not bad without a lift tbf
@@diydaly All done, an easy job, nothing stood out as being too awkward 👍.
@@916hayabusa nice one , glad to hear it 👍
Thank you!😊
You're welcome 😊
thanks so much
You're welcome!
Great job. Very easy to do when looking how you work. Does 1.5 tdci/hdi have any different timing system?
Thanks for the comment!😃👍👌. the 1.5 is also the same 👍
Doing this to my 2010 Zetec S Fiesta TDCI soon! However, I have a high pitched squel/whine coming from what appears to be the HPFP, I hope its not but it sounds like its coming from that area. Don't suppose you have a video showing how to change the HPFP on these duratorqs? Also, cracking video and really detailed. Subscribed!
Thanks! No I’m afraid not , hopefully I’ll chance in the future!
Very informative thank you very much am waiting for the parts ! I wonder this was the watterpump was seased and the timing belt jumped. I
wonder if the rocker arms are damaged, will get the timing belt fixed time the engin hope every thing is ok
👍👍
THANKIOU
👍
TAHANKIOU IRMANO
Thankyou 😁
Thank you for a great video.
I have done the same cam belt change twice on my 2009 Ford focus 1.6 diesel following the Haynes manual and Autodata 2010 book. I had removed the wiper blades and the drainage area below to improve access and even loosened the LHS engine mount to raise the engine to get a better view of the tensioner. Looking at your video it makes me realize that the job is much simpler than I made it and my current 2012 Ford C-MAX is a much tighter space than the Ford Focus I worked on previously.
I have the locking pin for the flywheel and used it on the earlier Ford Focus with a friend turning the crankshaft to find the point where the pin located in the flywheel.
I was a bit thrown in the video where you pointed to the area below the starter and the plastic cover. Did you mean that the flywheel locking tool mentioned in your link is to be used by removing the starter and fixing it there? I have looked at another RUclips video to change the starter and this requires an awful amount of work removing the battery etc to gain access to the bolts holding it and the working area looks very tight, and the access from below to remove further bolts.
I suppose the shorter part of what I would like to say is please add in the video that it is quite OK to tighten the crankshaft pulley bolt using a Powerful impact gun and perhaps a check could be made on the advised rotation of 190 degrees by putting tipex Mark on flywheel pulley and bolt at beginning of tightening and see where the bolt has rotated to after using the impact wrench.
On my previous belt changes I did use the pin locking tool into the flywheel and found that turning through 30Nm +180 degree as in Autodata book needed a massive extension on my bar to achieve this angle.
Does this pin locking point on the flywheel still exist on the 2012 C-MAX
Once again great credit to you for sharing your knowledge and fantastic clearly explained video.
Pat O'Brien
👍👍👍 thanks
Great video, it's given me the confidence to have a go myself. Just out of interest, how long does a job like this take you if you weren't filming every step? I'll just double that ;-)
Id say 2.5 - 3 hours.. having a go yourself id say exact around 4 hours area 👍
best vid iv seen. can fo mine now cheers
👍 thanks for the comment , glad to help 👌😁
Hello when you look at the fuel pump especially the locking tool there is quite a lot of play between the two knuckles sometimes one knuckle is closer to the hole sometimes in the middle so my question is do the knuckles have to be exact so that the locking tool is between the knuckles or it doesn't matter where the knuckles are as long as it is in that place
Anywhere in that gap is fine mate 👍
Very informative... Brilliant video 👍
Glad it was helpful! thanks for the comment 👍👍
nice instructive video. When you tension the belt, would you move the bit with the hole round to where in lines up in between and reinsert the pin and then do the nut up? instead of trying to hold it in place ?
Thanks , no always just hold it in place with the Allen key mate 👍
Great video, well explained with good camera work. Is the 1.6 petrol the same ? I know the 1.0 ecoboost has the dreaded wetbelt.
Thanks, the petrols quite different mate
Great video, got this job on this weekend with a 508 I've just brought. It's an semi-automatic though, normally I just stick a manual in 6th and get someone to stand on the brakes as I tighten the crank pulley bolt but obviously I can't do this, have you any idea where I get access to the flywheel on this engine so I can jam a big strong screwdriver in there? I know where the flywheel locking hole is but don't want to do it just on the locking pin. Thanks for good tutorial really helpful.
Thanks ! glad it will help . im not sure without looking tbh mate, be handy is you could access a buzz gun, makes easy work of it 👍 yeah I wouldn't advise using the pin either
@@diydaly no worries I found it round by the starter, I've a Poundland impact gun you plug in to the mains so no issues getting the bolt loose it's getting it tightened up again cos the gun is just full forward or full reverse and it's a brute lol did it yesterday anyway timing was one tooth out so I realigned the crank and it seems to be running ok. Fingers crossed it's stays that way and I don't loose my pulley in foot down Friday 🤣
@@76cribs19 haha! Nice one .. hopefully so 👍👍
Excellent video, very easy to follow and has given me the confidence to change mine. I have one question that I'm hoping you may be able to answer. I need to change the crankshaft oil seal too. Is it a case of once the cambelt has been removed, just pulling the bottom pulley off of the crankshaft and replacing the seal, or is it more involved than that?
Yeah there not bad to do one the belt is off, you’ll just need to remove the bottom pulley the you can access it
That's great, thankyou
Could you also give product reviews. It would be much helpful😊
👍
Hi, does the flywheel locking tool, that you show in the video fit Ford Focus 3 1.6tdci 115hp 2014?
I’m fairly sure it will mate
Hi,do I have to push the belt all the way towards the engine on insulation.
My belt is out of line a little and close to the timing cover I need some advice. Amazing video by the way.
it will normally sit in a certain position, not normally all the way on but it shouldn't be riding off the edge, you can sometimes see the markings on the cam pulley where the old belt was running
Great video 👍 mine is the auto powershift on my Volvo , do i just leave it in park or neutral 🤷🏼♂️ when undoing crank bolt ? Cheers
But the foot on the brake or lock the brake disc , will be a lot easier if you can get a buzz gun
👍🏻
Thanks
super návod jen se chci zeptat jak dlouho trvala výměna? Ať se daří. CZ
Thanks , im struggling to translate? ta
1.6tdci it is good engine and economical.
👍👌
great job doing mine soon you did not mark the fuel pump pully ?
Didn’t need to as it’s pinned up mate , there’s a locator for it
I don't understand what the point of blocking the flywheel is, can it be done differently without blocking it?
I noticed you kept mentioning the fuel pump? Is it a diesel engine? The cmax wasn't sold with a diesel engine here in the United States, great video by the way, cheers!
Thanks , yeah it’s a diesel 👍
Great video. I followed it for changing the belt in my b max 1600tdi but two strange things happened but do not know if I should continue rebuilding the eng at the moment,
. 1 when I removed the pin in the fuel pump wheel, the backplate spun upwards such that the locating hole was not visible. 2.After adjusting the tensioner so that the locating pin was in the middle of the rear plate, after rotating the crankshaft two turns the tensioner are with the hole dropped back down to the untensioned position. Any feedback on these issues would be very much appreciated.??? I have been told that it is easy to wreck these engines if the timing is not correct. Many thanks,
.
Yes hard to say without seeing it but it’s quite normal for the fuel pump to move.. just make sure it’s in the correct position when the belts on.. and same for the tensioner it will move when the belts turned .. it’s just imperative that it was in the correct position when you tightened the nut
Hi. Great video. How do you prevent crankshaft turning when you try to torque the pulley bolt?
you would need to use a flywheel locking tool , ive put a link to one in the description mate
I reckon an impact wrench is not enough. Going to order one tonight as i couldnt finish the torque today😂thank you👍
@@krisztianhorvath2675 nice one 👍👍
Isn't the flywheel locking tool supposed to be fitted where the starter motor is?couldn't fit it there where your footage shows.
@@krisztianhorvath2675 I’ve never used one tbh , I thought the universal type will fit there