Hi, Deb! May I say, as a retired chemistry teacher, that you are a fabulous teacher. I have attended many online and in-person classes. The quilters teaching the classes were so talented at quilting and piecing but some were not able to explain how to do their technique. Teachers get frustrated with that very easily. You are phenomenal at explaining everything with such clarity. Technique and precision is so important in this craft. I am so very impressed !! Thank you so much!!
This tool is fantastic. I would offer a few of my preferences to save time. (I recently had to to do 200 of these, so I'm sharing my trials and tribulations!). Given the pattern, the unit had to be perfectly executed. First: Get this tool. Don't dither or use other ruler hacks. Oversizing and trimming down (slivers) biased units ensures 100% success rate . (No Deb does not pay me) Second: Consider cutting from rectangle units. To measure, for the unit that you are making cut one unit (e.g. two sides), and then measure the width of your cut unit smooshed together. If you cut these rectangles, you will save so much time because you are not rotating your ruler. I recently had to make 200 of these units. They finished 3 x 6. I cut my rectangles 7 x 4.25. ( so basic math would be, strip height/2 + .75 But you should verify using the smooshing method!). Also, better accuracy because, lets face it, aligning on an angle that is already cut is sometimes not so easy. As these are oversized units, then a wobble does not matter so much. Third: Consider glue basting your units together. You can phase your work, and the bias seam is stabilized and no pins to catch on you or sister units. (I 'm a serial glue baster). Fourth: When trimming your units phase your cuts into 2 passes: 1st pass to make first 2 trims. Trim, and set on a pile. Make a 2nd pass by rotating the entire pile and making the 2nd set of trims. Benefit? If you are trimming 50 at a time, you are making 1 rotation instead of 49 additional. And each pass you are hitting different marks. In my quilting sweatshop (I'm the only one), it all adds up. And these split rectangles make charming borders to make peaks and valleys when background + color are paired.
I am really enjoying your series. This is another must have in the collection. It is always easier to see demonstrations than figure out what to do - even with written instructions. I'm lazy! LOL! Thank you so much. xx
I agree. I just ordered the 2 items (ruler & laminated bonus sheet) and the free instruction sheet (download). I ordered the corner block ruler yesterday. Wish I could combine the two orders from yesterday & today and save the shipping charge of $8.95 on at least one, but doubtful it can be done. I'm so looking forward to receiving these two rulers now. My only concern is I'd like these rulers (all of them) to stay in place as I make the cut. That's a continual problem I have with skill . . . . wish there were adhesive stickers that could be applied to the backs of rulers. It could be that I'm 75 years old, or that my table is too high. I stumbled across Deb's demos on You Tube, and I'm so happy I did! Now I have it book-marked on my PC. Happy Camper here!
@@nancydublin9666 I hope that, in the last months, you have discovered that there are silicon adhesive dots and circles (one brand is True Grips) that can be added to the back of any quilting ruler. We all need them!
I agree with you, Gwyn, about Deb's tips. She gives excellent ones. I am going to employ her 1/4" seam "creation" by using tapes one on top of the other to achieve best results. No doubt Deb is best! Also, do you ever notice her clothes? I think she either sews them herself or buys "designer" styles. They are all so nice. Her matching jewelry is very nice too. It's not diamonds, but matching "good" jewelry. She's an impressive lady all the while very down-to-earth with out airs to herself. I'm a new fan! :)
This years “Brown bag mystery” called for a split recs unit but of course they wanted you to buy their ruler. I had just bought your ruler last fall so I was so happy to use it of course Tuckerizing the pattern. It turned out fantastic. Now to get that sheet and have some fun.
Deb, As always excellent teaching. It' my 39th Wedding Anniversary today. My hubby asked who is the lucky one to get my quilting wishes. Studio 180 of course. I am getting more rulers & technique sheets. Hugs
Thank you! Not only are you an ingenious inventor but also an excellent teacher! Love your videos. They are slow enough to follow and understand without making us feel like you are talking to 3year olds as some quilt “teachers” do. Thanks for all you do for quilters and for sharing your wealth of knowledge with us! God bless you and your family
I got the ruler and now I need the technique sheet. I wish you would have talked about the quilt that was behind you. Point out how the block would go to make that design. Great video! Thank you.
That's our Fiesta Pattern, and if you'd like to know how to make that quilt, you can order it right here: deb-tuckers-studio-180-design.myshopify.com/products/fiesta
Couldn’t you use the “V” block tool to cut out the “A” pieces, instead of trying to draw the “optional” line on the split rects tool? It appears to be the same shape.
You can. We didn't want to make it a two tool technique sheet for those that don't have the V Block tool. So if you have the V block tool please feel free to cut the shape using that tool instead.
Love it that you do it for right and left handed. You are such a great teacher
Hi, Deb! May I say, as a retired chemistry teacher, that you are a fabulous teacher. I have attended many online and in-person classes. The quilters teaching the classes were so talented at quilting and piecing but some were not able to explain how to do their technique. Teachers get frustrated with that very easily. You are phenomenal at explaining everything with such clarity. Technique and precision is so important in this craft. I am so very impressed !! Thank you so much!!
Wow, thank you!
This tool is fantastic. I would offer a few of my preferences to save time. (I recently had to to do 200 of these, so I'm sharing my trials and tribulations!). Given the pattern, the unit had to be perfectly executed.
First: Get this tool. Don't dither or use other ruler hacks. Oversizing and trimming down (slivers) biased units ensures 100% success rate . (No Deb does not pay me)
Second: Consider cutting from rectangle units. To measure, for the unit that you are making cut one unit (e.g. two sides), and then measure the width of your cut unit smooshed together. If you cut these rectangles, you will save so much time because you are not rotating your ruler. I recently had to make 200 of these units. They finished 3 x 6. I cut my rectangles 7 x 4.25. ( so basic math would be, strip height/2 + .75 But you should verify using the smooshing method!). Also, better accuracy because, lets face it, aligning on an angle that is already cut is sometimes not so easy. As these are oversized units, then a wobble does not matter so much.
Third: Consider glue basting your units together. You can phase your work, and the bias seam is stabilized and no pins to catch on you or sister units. (I 'm a serial glue baster).
Fourth: When trimming your units phase your cuts into 2 passes: 1st pass to make first 2 trims. Trim, and set on a pile. Make a 2nd pass by rotating the entire pile and making the 2nd set of trims. Benefit? If you are trimming 50 at a time, you are making 1 rotation instead of 49 additional. And each pass you are hitting different marks.
In my quilting sweatshop (I'm the only one), it all adds up.
And these split rectangles make charming borders to make peaks and valleys when background + color are paired.
I am really enjoying your series. This is another must have in the collection. It is always easier to see demonstrations than figure out what to do - even with written instructions. I'm lazy! LOL! Thank you so much. xx
Aw, thank you, glad you like them!
I agree. I just ordered the 2 items (ruler & laminated bonus sheet) and the free instruction sheet (download). I ordered the corner block ruler yesterday. Wish I could combine the two orders from yesterday & today and save the shipping charge of $8.95 on at least one, but doubtful it can be done. I'm so looking forward to receiving these two rulers now. My only concern is I'd like these rulers (all of them) to stay in place as I make the cut. That's a continual problem I have with skill . . . . wish there were adhesive stickers that could be applied to the backs of rulers. It could be that I'm 75 years old, or that my table is too high.
I stumbled across Deb's demos on You Tube, and I'm so happy I did! Now I have it book-marked on my PC. Happy Camper here!
I feel exactly the same! Seeing her demos in action beats out the written directions. :)
@@nancydublin9666 I hope that, in the last months, you have discovered that there are silicon adhesive dots and circles (one brand is True Grips) that can be added to the back of any quilting ruler. We all need them!
Thank Deb for this fantastic demo. Every time you gave a lefty tip, I smiled. This ruler is going on my Christmas wish list!
I agree with you, Gwyn, about Deb's tips. She gives excellent ones. I am going to employ her 1/4" seam "creation" by using tapes one on top of the other to achieve best results. No doubt Deb is best! Also, do you ever notice her clothes? I think she either sews them herself or buys "designer" styles. They are all so nice. Her matching jewelry is very nice too. It's not diamonds, but matching "good" jewelry. She's an impressive lady all the while very down-to-earth with out airs to herself. I'm a new fan! :)
This years “Brown bag mystery” called for a split recs unit but of course they wanted you to buy their ruler. I had just bought your ruler last fall so I was so happy to use it of course Tuckerizing the pattern. It turned out fantastic. Now to get that sheet and have some fun.
Deb, As always excellent teaching. It' my 39th Wedding Anniversary today. My hubby asked who is the lucky one to get my quilting wishes. Studio 180 of course. I am getting more rulers & technique sheets. Hugs
Aw, happy anniversary! I hope you enjoy your new goodies 🤗
I’m so glad to see you demonstrate this awesome tool, I have
It and can’t wait to try it out! Thanks for the demonstration 🙂
God Bless you Deb, thanks a lot for. The vídeo....🙏🏽🙏🏽🇵🇦
I LOVE these rulers!
Thank you for sharing your wonderful videos, and all the tips for left handed like me 🇦🇺😍
I love that match point tip!
Another great tutorial!!!! Thank you Deb!!! 😃😃😃😃
Wow how smart you are !!! I m adding it to my wish list.
I have this tool! Can’t wait to see you demonstrate it!!!
Glad you're excited for the premiere 💜
@@DebTuckersStudio180Design This was great to watch!!! Adding Tech sheet to others I have on my list to order.
Thank you! Not only are you an ingenious inventor but also an excellent teacher! Love your videos. They are slow enough to follow and understand without making us feel like you are talking to 3year olds as some quilt “teachers” do. Thanks for all you do for quilters and for sharing your wealth of knowledge with us! God bless you and your family
Thanks
I got the ruler and now I need the technique sheet. I wish you would have talked about the quilt that was behind you. Point out how the block would go to make that design. Great video! Thank you.
That's our Fiesta Pattern, and if you'd like to know how to make that quilt, you can order it right here: deb-tuckers-studio-180-design.myshopify.com/products/fiesta
Love your videos! What is the quilt pattern behind you please! Oops found it - Fiesta!
What is the name hanging on the wall behind you please? Is it available for the general public to purchase? Thank you.
that is her "Fiesta" pattern for sale on her website.
Thank you Charlotte 🥰
Are you making the quilt hanging behind you?
No the units in this video are different than what is in the video. The quilt just uses just plain Split Rects units that are Corner Popped.
thanks so much for mentioning we lefties
I love this technique/blocks, but my ruler doesn't have the option line. I only got it recently so I am a bit disappointed.
I see I must not be the only one asking as you have a new video coming out soon. Thank you in advance?
Couldn’t you use the “V” block tool to cut out the “A” pieces, instead of trying to draw the “optional” line on the split rects tool? It appears to be the same shape.
You can. We didn't want to make it a two tool technique sheet for those that don't have the V Block tool. So if you have the V block tool please feel free to cut the shape using that tool instead.