How to join your artificial grass RIghtgrassUK

Поделиться
HTML-код
  • Опубликовано: 5 авг 2014
  • Step by step guide on how to join your artificial grass, For me information visit RighgrassUK for our installation guide
  • ХоббиХобби

Комментарии • 16

  • @jimklemens5018
    @jimklemens5018 2 года назад +3

    You need to spread the adhesive with a notched trowel.

  • @karlholland2061
    @karlholland2061 7 лет назад +3

    excellent job

  • @hclandscapes
    @hclandscapes 4 года назад +2

    Do you need to weigh the glued join until it goes off?

  • @milamou9352
    @milamou9352 2 года назад +1

    I want to put some artificial grass on my cedar wood decking and I'm wondering if I can lay the 'grass' directly onto the decking or do I need an underlay?

  • @074.manasyadav2
    @074.manasyadav2 3 года назад +2

    which type of glue it is?

    • @deanmadnut2614
      @deanmadnut2614 3 года назад

      It looks like silicone but that's more of a sealant

  • @glitch_ttv_yt3519
    @glitch_ttv_yt3519 Год назад

    I inherited a property with a small sloped garden with artificial grass. The grass is sloped and at the bottom stops against a sleeper along with the rainwater. How can I diy this plz buddy ?

    • @invtrk1046
      @invtrk1046 Год назад

      Cut the artificial grass back 50cm from the sleeper, in a straight line parallel to it . Dig a trench of approx 40cm deep that spans across the whole sleeper and fill it with gravel. Effectively, you created a french drain that will collect and drain the water to the ground. The dimensions I gave are typical but I don't know your specifics of the lawn so they may need to be deeper, etc.

  • @charlenejones5152
    @charlenejones5152 3 года назад

    😎

  • @qasehquraishah
    @qasehquraishah 3 года назад

    What the name of the white paper?

    • @ToxCcc
      @ToxCcc Год назад

      Joining Tape

  • @footballdream8505
    @footballdream8505 6 лет назад +1

    Cutting close to your knee😱

  • @kevinbaird7277
    @kevinbaird7277 5 лет назад +4

    over 70% of the seam is not glued, poor example, the glue should have been notched to even it out.

  • @safcmackem1094
    @safcmackem1094 5 лет назад

    Thumbs up but shit sound. Too low !!!