Thank you so much! The official guide didn't cover the seperate erasing part, and didn't work. This guide made it work immediately, even though I had to watch with subtitles.
Planning to buy a speedy bee F405 v4 will ti work with it for the same purpose are there any limitation to making a custom code so cannot use a pixhak or ap. as it is too big so can I go with this or there is an limitation as having any less features or everything is same
Look I don't have any problem with speedybee f405 but if u need to connect any relay or something else u can't because there is no aux out puts yes u can attach elrs you can attach gps with compass and telemetry ,opticalflow sensor you can do waypoints missions and one thing don't forget to install SD card in flight controller otherwise unable to arm it
If u want to flash ardupilot go for sky star h743 it's a beautiful stack and if u go for this stack you need one more parameter to change brd_alt_config=1 default is 0
How to change the orientation of board ? When I push the stick front my quard goes back and back goes front left become right . How to fixed it in SpeedyBee F405 . In ardupilot
Go into Inputs and change the Weight to -100 to reverse that channel. Reversing channels can also be done in the Outputs page. Scroll down to the Elevator channel and long press Enter, then edit Direction by pressing Enter to Inv the channel. Some people do not recommend reversing channels in the Outputs page, noting that doing so in certain complex mixes, can cause issues. For simple model setups like for quads, it's perfectly fine, as the Outputs page is where all servo/channel direction and travel limit are intended to be set up and be visualized in one place.
Yes u can but read ardupilot documentation as per my knowledge the developer were working on it may be they solved the issues regarding speedybee f405 v4 board
Hi brother i am from india, which is the best flight controller for a 7 or 5 inch fpv drone, my project is to use lidar,gps,inav,adrupilot and i want many port to experiment with attachment like gimbal and all
Thank you so much! The official guide didn't cover the seperate erasing part, and didn't work. This guide made it work immediately, even though I had to watch with subtitles.
Thanks
Thank for posting. This helped me!
You're welcome!
Tnx it helps me bro
Welcome 😊
Planning to buy a speedy bee F405 v4 will ti work with it for the same purpose are there any limitation to making a custom code so cannot use a pixhak or ap. as it is too big so can I go with this or there is an limitation as having any less features or everything is same
Look I don't have any problem with speedybee f405 but if u need to connect any relay or something else u can't because there is no aux out puts yes u can attach elrs you can attach gps with compass and telemetry ,opticalflow sensor you can do waypoints missions and one thing don't forget to install SD card in flight controller otherwise unable to arm it
Good day Do you have a tuitorial on how to tune or set up the flight controller? on ardupilot?
Already on my channel pls watch even on speedybee and skystar both the boards I already uploaded the video
what kind of vtx to use so we can have camera on laptop and give commands and radio controller - radio receiver
You want camera footage on mission planner hud
If u want to see camera footage than in a simple way u need a separate receiver and digital to av converter for ur laptop
Good tutorial I wish that would be in English :)
But many thanks anyway for the hard job here.
Thanks
F405 v4 still developers are working on it right now as per my knowledge v4 still not supported properly
If u want to flash ardupilot go for sky star h743 it's a beautiful stack and if u go for this stack you need one more parameter to change brd_alt_config=1 default is 0
Too Late :( I already got a speedybee F4 V4 : ( Hope I can make it works
@@dronetechnology2772Can you share any major issues you found with teh F4 V3 ?
Thanks
New firmware update karne ke bad firse settings karna parta hain Kia, Or same settings rahata hain?
Same for Quadcopter
How to change the orientation of board ? When I push the stick front my quard goes back and back goes front left become right . How to fixed it in SpeedyBee F405 .
In ardupilot
You have to change settings in remote controller
U r using which controller
@@dronetechnology2772 I use Jumper T20
Go into Inputs and change the Weight to -100 to reverse that channel.
Reversing channels can also be done in the Outputs page. Scroll down to the Elevator channel and long press Enter, then edit Direction by pressing Enter to Inv the channel.
Some people do not recommend reversing channels in the Outputs page, noting that doing so in certain complex mixes, can cause issues. For simple model setups like for quads, it's perfectly fine, as the Outputs page is where all servo/channel direction and travel limit are intended to be set up and be visualized in one place.
Tomorrow I will upload a video regarding inv reverse the channel in radiomaster
can we flash for speedybee f405 v4? as I cannot see any tutorials on it on youtube.
Yes u can but read ardupilot documentation as per my knowledge the developer were working on it may be they solved the issues regarding speedybee f405 v4 board
Can this done with jhemcu GF30f405 fc?
No not possible pls read supported board of ardupilot u can find the flight controller list here
Thank you
Thanks for what my friend
Welchum taho hi hadii
What did you say could not understand
Hi
Yes pls
Can we use it for way point mission
Yes u can. every thing like pixhawk you can attach elrs reciver
Best board is skystar H743
@@dronetechnology2772 I need i-bus support
Hi brother i am from india, which is the best flight controller for a 7 or 5 inch fpv drone, my project is to use lidar,gps,inav,adrupilot and i want many port to experiment with attachment like gimbal and all
I was planning to buy speedybee f405 v4 but i saw your comment and this skystar fc looks better with H745 processor and price for stack