Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
It's all very good. If you want to be protected, you are the first one to be disconnected from your own wifi.
Hi, I have a multitasking problem, I want to print when a button is clicked and at the same time make a GET request, but it doesn't issue the click until the request is finished. Have you ever had this problem?
No,this will not happen .
hi men i want the code how can i find it ?
Can you please tell me how to attach all the components to pcb board and the battery also 😅
I have included a circuit diagram in video check it out
@@FLYHIGHDIYmake part 2 upgrade range please
Yo don’t need all this to do, just flash a firmware to esp and all done and easier then this
It's not working for 5 GHz band only working 2.4 GHz band
That doesn’t work with 5ghz,as esp supports only 2.4ghz
With a rtl2750dn (like an esp32 but with 5ghz wifi) you can make a 5ghz deauther
@franciscobreglia6131 I will try that
@@franciscobreglia6131 What is "rtl2750dn" ? Please tell me ! I have searched in on Google, but nothing comes there ! Please tell me the full name 🥺
5GHz use esp32
What are you flashing it with? Nice build.
its called "nodemcu flasher master"
Where can I found the code?
Make a video on 5ghz network
how long does the battery last on this?
3.7v fully charged lasts nearly 6-9hrs
Thanks@@FLYHIGHDIY
do you have the tutorials for soldering it?
I did not record the soldering process!!
@@FLYHIGHDIY Can I see the cables management behind the PCB?
@ msg me on Insta I will share photo
Is not have a code?
Code please
Show in password 😢
What?
source. code?
Do it with a 5Ghz
Do it with a 5 GHz what?
@@onkelrolle no 2.4only
bro code send
Що ти пропонуєш? Схему бачу, а програмного забезпечення - ні.
I will upload the code and tutorial on next part
When do you download the chart or code?@@FLYHIGHDIY
can u provide send code to me
Dm me on Instagram
It's all very good. If you want to be protected, you are the first one to be disconnected from your own wifi.
Hi, I have a multitasking problem, I want to print when a button is clicked and at the same time make a GET request, but it doesn't issue the click until the request is finished. Have you ever had this problem?
No,this will not happen .
hi men i want the code how can i find it ?
Can you please tell me how to attach all the components to pcb board and the battery also 😅
I have included a circuit diagram in video check it out
@@FLYHIGHDIYmake part 2 upgrade range please
Yo don’t need all this to do, just flash a firmware to esp and all done and easier then this
It's not working for 5 GHz band only working 2.4 GHz band
That doesn’t work with 5ghz,as esp supports only 2.4ghz
With a rtl2750dn (like an esp32 but with 5ghz wifi) you can make a 5ghz deauther
@franciscobreglia6131 I will try that
@@franciscobreglia6131 What is "rtl2750dn" ? Please tell me ! I have searched in on Google, but nothing comes there ! Please tell me the full name 🥺
5GHz use esp32
What are you flashing it with? Nice build.
its called "nodemcu flasher master"
Where can I found the code?
Make a video on 5ghz network
how long does the battery last on this?
3.7v fully charged lasts nearly 6-9hrs
Thanks@@FLYHIGHDIY
do you have the tutorials for soldering it?
I did not record the soldering process!!
@@FLYHIGHDIY Can I see the cables management behind the PCB?
@ msg me on Insta I will share photo
Is not have a code?
Code please
Show in password 😢
What?
source. code?
Do it with a 5Ghz
Do it with a 5 GHz what?
@@onkelrolle no 2.4only
bro code
send
Що ти пропонуєш? Схему бачу, а програмного забезпечення - ні.
I will upload the code and tutorial on next part
When do you download the chart or code?
@@FLYHIGHDIY
can u provide send code to me
Dm me on Instagram