opticalflow with arducopter

parametres
serial3_baud=115
serial3_option=0
serial3_protocal=32
flow_type=7
flow_fxscaler=-800
flow_fyscaler=-800
rngfnd1_type=32
rngfnd1_max_cm=120
rngfnd1_min_cm=1
rngfnd1_orient=25
ahrs_ekf_type=3
ek3_src_option=0
ek3_src1_posxy=0
ek3_src1_posz=2 [ parametres for optical flow]
ek3_src1_velxy=5
ek3_src1_velz=0
ek3_src1_yaw=1
ek3_src2_poxy=3
ek3_src2_posz=1
ek3_src2_velxy=3 { parametres for gps}
ek3_src2_velz=3
ek3_src2_yaw=1
rc9_option=90 This parametre is used for changing opticalflow to gps
rc10_option=158 This parametre is used for optical flow calbration
• Calibration of optical... {calibration process video}

[@ansumanmishra377]

Please make one video on adding Wi-Fi telemetry module in ardupilit...

[@dronetechnology2772]

Ok

[@arsalangilani1460]

Thanks for the video
Can you tell me that why you uncharted GCS Lock in Arm Checks (bitmask)
Can you tell me the reason that what will happen with it?

[@dronetechnology2772]

This is the right procedure if u don't tick this gps then some time u are unable to arm the quad it's help to arm the quad without gps

[@dronetechnology2772]

Other wise system will check the whole things that gps r locked or not

[@dronetechnology2772]

It's is only to arm the quad when u r in optical flow position

[@VishalJN]

Nice video 👍 where can i find the optical flow sensor?

[@dronetechnology2772]

For matek u can search rc dhamaka, fpv.in quadkart,robu.in drkstore.in.rc Mumbai but I bought from rc dhamaka.
2nd one mtf01 micoair this one is osm but u can get it from robufusion.in china base site one I bought from there

[@VishalJN]

@@dronetechnology2772 thanks for the info

[@technicalsupport6983]

Merapas Tf-02 lider ha same setting use karna Hain , same calibration ?

[@dronetechnology2772]

Tf02 is lidar only u will not get position hold u will get only altitude hold

[@technicalsupport6983]

@@dronetechnology2772 ok that's enough for me .... 😀