Honda Pioneer 1000-5 Storage Solution
HTML-код
- Опубликовано: 11 окт 2024
- This video explains how to turn the hollow sections of the rear doors and the back bed sections into storage.
In the video, I say I got the snap button fasteners on “RUclips”. That was a mistake. I got them on Amazon. Here is the link:
www.amazon.com...
Tools needed:
-18 of the above fasteners(this is enough to make all 4 storage areas)
-Vice grips
-3/4 inch drill bit
-1 inch hole saw
-Reciprocating saw or hack saw
-Small grinder or sand paper
-Thread locker
Please like and subscribe if you like this video. Thanks.
Great video. I actually did the storage on the rear panels and found that self adhesive weather stripping helped keep the dust out.
Great video. I'm going to hopefully go buy one of these tomorrow after running a polaris ranger for a year and I was disappointed in the amount of storage options the pioneer has compared to the ranger, so this really helps!
Thank you. Glad it helped out. Hope you get to join the Honda Pioneer club.
Did you end up getting the pioneer?
@peytonhorn2833 I did actually and so far I'm pretty happy with it overall. I use it pretty much like a car at the moment and one of these days when I get off my rear I'm going to put on all the stuff I got for it like the new front bumper, winch, extra lights, etc...
Thanks for the video. I just did my back 2 doors and rear panels. Worked great!!!
Fantastic. Sure adds a lot of storage!
Well done. Methodical and clear.
Thank you very much.
where did you get your rear rack? trying to help a friend of mine locate one for his Pioneer and not having much luck...
I did this storage idea on my pioneer and after a few rides, the push button latches were near impossible to function. The grit and dirt from the trails has the buttons nearly inoperable. Serious pain the the neck there on afterwards.
But. Huge storage area and seemingly a good idea.
Great video Greg!
Thanks! Appreciate it!
Great instructional video, thank you.
Thank you! Appreciate the comment.
Loctite is not needed on plastic panels but if it makes you feel better have at it lol. Put a piece of marine vinyl over the holes you cut out, only screw it down across the top, to create a “flap” any water/dirt that runs down behind the panel will not go in the hole this way.
thanks for the video.
When I popped out the original black tabs, there is nothing but a hole in the plastic. Nothing for the screw to screw into. Did you insert anything into the hole or is there something there for the screw to screw into?
I am not sure what black tabs you are referring to. On mine, the panels were held in with screws. You unscrew the panel, then screw post into the hole. Drill out the panel and insert the snap button. No black tab.
Is yours a newer year? Wondering if they changed something. Sorry I am not more help.
My 2022 Pioneer 1000-5 only had the plastic push tabs that hold the panels on. I used M6 rivet nuts and the rivet nut tool to give the ball/ bolt something to thread into. Once I got the ball/bolt set to the dept I need for the push button to latch on to it without a lot of play, I locked the ball/bolt into place from the inside with the nut that was provided with the ball/bolt. I used a pair of vice grip pliers to hold the end of the ball(applied enough pressure to grab it without tearing up the ball)while I tighten the nut up against the backside of the rivet nut. I also used loc-tite on the threads. Hope this makes since and works for you.
Have you had any issues with rainwater going behind the panel/door and running into the hole you cut out for storage?
I have not had any issue. I have seen others add weather stripping around the cut opening, but I haven’t had a reason to yet. Thanks for watching!
What is the brand of snow track you have and how are they holding up?
Camso 4s1.
I have been incredibly happy with them. No issues and they have lots of miles on them.
🏆🏆🏆👍🇺🇲🙏
Thank you for sharing
Thank you!
Where did you get the push buttons for the Honda pioneer 1000-5
I got them on Amazon. I was going to attach the link but they are currently showing unavailable. Go to Amazon and search “vehicle hood pins”. There are multiple manufacturers. Hope that helps. Good luck
Any issues with rust with those push button locking mechanisms?
No. None at all and they have been caked in snow and covered in mud to many times to count. So far, no issues.
@@fishandsheds1771 I love the fit and finish of it. Really adds to the usability of the machine. Would I be correct in assuming that the posts are the 2” version vs the 4” version? I’m in Canada so I have a different eBay portal. The link you gave takes me to the US eBay site, but doesn’t reference the length of post. Can’t wait to tackle this project!
@@landcruiserchewy I am amazed at what I can fit in there. It is a bit of a puzzle to get stuff in and out but it works. Thanks and yes, 2 inch.
@@fishandsheds1771 Thanks for your help Greg. Big fan of the channel from what I’ve seen so far. Just bought a 2016 1000-5 Deluxe for a steal of a deal I could not refuse. What a beast!
Hey my new 2022 1000-5 didn't have screws holding the pannel. Has those crappy push plug plastic things. Now if I use a nuts on the studs the pannel hangs ofd the rig by a bit. Any ideas
Could you attach something(maybe a piece of sheet metal) on the inside of the with rivets or glue, then drill your hole and attach nuts? Or I think they make other fasteners designe for those holes-similar to the hood fasteners? Trying to picture what you have going. Too bad they went to the plastic push rivets.
@@fishandsheds1771 so the studs I have are just like yours. I got two nuts and two washers. One set inside and one outside to prevent it going in and out. But it makes the pannel hang off far. And look silly. I was thinking a just getting the threaded things you have. How do they attach?
There is a threaded piece, nut, embedded in the plastic.
Same issue on my 2022 Pioneer. Just a hole and nothing threaded for the screw. Any solutions?
Did my 2023 yesterday. Get some 6mm rivet nuts and a tool and add your own inserts. They fit perfectly and the stud threaded in and used one if the nuts on the backside to lock it in place.
How do the door hinges handle the weight?
I haven’t had any issues at all and have quite a bit of weight in the doors.
Hate my Honda Pioneer 1000 rattles everywhere, transmission sucks, motor is noisy, and is hot piece of junk . I was a Honda dealer for 52 years and they built the best not in this machine. Wondering why I’m not a Honda dealer anymore they terminated me as a dealer for running down BLM on my personal Facebook . I have a 22 can am defender limited and love it
Honda needs bucket seats in front to be a softer ride