This is how Intratec TEC-9 works | WOG |
HTML-код
- Опубликовано: 8 фев 2025
- The Intratec TEC-9, TEC-DC9, KG-99 and AB-10 were a blowback-operated line of semi-automatic pistols. They were developed by Intratec, an American subsidiary of the Swedish firearms manufacturer Interdynamic AB. Introduced in 1985, the TEC-9 was made of inexpensive molded polymers and a mixture of stamped and milled steel parts, and the simple design of the gun made it easy to repair and modify. The TEC-9 developed a negative reputation for its association with organized crime, street gangs and mass shootings in the 1990s, most notably used during the 101 California Street shooting and the Columbine High School massacre. However, it was a commercial success, and over 250,000 were sold.
Type:
Semi-automatic pistol, Pistol-caliber carbine
Place of origin:
United States
Designer:
George Kellgren
Manufacturer:
Intratec
Produced:
1985-2001
Number built:
257,434
Variants:
KG-99, TEC DC-9, TEC DC-9M, AB-10, TEC-9M (Mini, 76 mm barrel, no barrel jacket, 22-round magazine), TEC-9S (stainless steel)
Weight:
1.23-1.4 kg depending on model
Length:
241-317 mm depending on model
Barrel length:
76-127 mm depending on model
Cartridge:
9×19mm Parabellum
Caliber:
9mm
Action:
Blowback-operated, semi-automatic pistol
Muzzle velocity:
1,181 ft/s
Effective firing range:
50 m (164.04 ft)
Feed system:
10, 20, 32, 36- and 50-round box magazine, 72-round drum magazine
Sights:
Iron sight
CONNECT WITH US:
Facebook page : / altinmedia666
INSTAGRAM : / channel
NOTIFY : notify.me/ALTI...
I’d have to say. This was the best break down vid. I’ve watched 4 different ones and this one slowed it down and zoomed in where I needed to see. Thank you. I got the fire control group figured out. But I needed to see the ejector and how the springs were set up to make sure I had and right. Your the man.
Glad it was helpful!
Poi
yeye
Good shit dude, I enjoy watching these as you go over the mechanisms.
Pode disponibilizar PDF modelo das peças em tamanho real para imprimir ?
so sorry i cant do that
The magazine lock spring is wrong
A mola da trava do magazine está errada
My tec9 blew-up in my hand yesterday. It appears a round did not fully chamber. When fired it sent the bullet down range ,and the cartridge brass separated at the base . The 'plastic' lower broke ,cracked and separated all the way to the trigger. Gun has less than 200 rnds. fired and has always been maintained and cleaned/ stored correctly. HELP?!
Bad round with a bulge or dirt in the chamber from poor quality ammo. If you were using federal. It wouldn’t surprise me.
Seems like too big a bolt for a small round.
Why do they jam so frequently? Any help on solving that would be great.
I am not a gunSmith you should check your kocak gunsmith
It mainly has to do with the fact that Tec-9s are picky guns when it comes to ammo, and magazines. If you read the manual for these guns it is stated that these guns are designed to run 115 grain round nosed FMJ rounds with factory mags.
I do have a recommendation though i have a kg99 and one part is way different. Could you do this same thing with a kg99?
sorry I can't 🙏
i swear to god why is every TEC-9 gun “how it works” is this f*cking game.
sorry 😂
@@ALTINSEA1 it’s happens, usually when there’s unique guns
COOL VIDEO. EXCEPT YOU FORGOT TO SHOW IT JAMMING 🤣🤣🤣😂😂🤣🤣🤙🤙🤙🤙🤙🤙🤙🤙
Lol ok
Ya clickbait title! Tec 9 jamming is how it works..😅😅😅
So the tec9 actually uses sten smg technique
compact sten
Program?
its a game on steam called world of guns: gun disassenbly
Ap9
Cómo se yama el programa que usas para las armas
store.steampowered.com/app/262410/World_of_Guns_Gun_Disassembly/
Why is Tim Poole voice on it
Back than we don't have a mic so we use our favorit youtuber to speak for US
My gun
hesoyam
Just show how it work ,with the animation, your vdo is not evn good tho it's too slow,but u can do better,when u r pro in it,no need to explain ,,,, just show it, btw ur vdo is so bad,,, sorry
no problem man
His video isnt bad if you weren’t so dumb maybe you would understand helped me alot reassembly