Quick Fit Demo to layout any lateral/dummy leg in 30 minutes with perfect results
HTML-код
- Опубликовано: 2 окт 2024
- www.advancedpip...
The Quick Fit System is a training program that many contractors all over the world use to layout any lateral/dummy leg with perfect results.
They seem like nice guys who made a video that really sucks! We learn absolutely nothing. They are time thieves! Just lots of hype and babble! Not worth viewing.
This is a load of bull. If you are not going to show at least an example of how you do this then Im not going to spend $90 for a DVD I might not be able to use lol
hey steven, i figured out how to do your trick, i am going to make a video on how to do it, since you wouldnt show anyone... i will send you link when it is up
ruclips.net/video/8eRPlYtPgFo/видео.html&lc=z23fwrvimyuux3gmoacdp4340lx0j4yntdpplsl2akxw03c010c
I literally watched that video prior to this atrocity and then found your comment 😂😂😂🤘🤘🤘
Just wasted 15 minutes of my life, waiting to so what is so amazing
All u did was use templet that took you days to make. I did not see nothing new. TO MUCH TALKING! Show the product your trying to sell.
Let’s see.... lay it out,cut the pipe, THEN make a template. Makes sense to me. No it don’t. Yes it does. No it don’t. What? Or you could just hire a pipe fitter.
What a joke I want my 15 min back
well watched the entire video never saw how was made...???????
he said he was going to demonstrate, so what the hell was that thanks for wasting my time I'm sure it works great
What did I miss ???? I saw nothing ! ! ! I can show how I tack weld or secure My piece to be cut into place and use a short length of anger Iron or sheet metal to lay out the angle then back measure and cut an almost prefect cut. Works great and I am making rocket stoves with this system in the Philippines and I think I should make a video that would teach more then this video did. Sorry but you guys owe me 15 minutes....
cant be that great, website is down and it does not even show up on a google search
Has anyone bought this shit? If so , let me know?
Are they on lunch break now?I hope so or they are fired.
you guys did'nt show any formula for template development, not even one, well i have made my own formula for all those kinds of fit-ups including the stiff leg. only 2 kinds of formula for template development of all those fit-ups.
Nothing more than a commercial rather than an instructional video.
You can find the method on you tube for free. This is click bait.
Hi, please, check www.etubespro.com where you will find a real practical method for fabricating saddle templates for tubes/pipes of any size and thickness intersecting any other tubes/pipes at any angle. It works with offsets in any direction or plane. A lateral pipe can intersect several other pipes at the joint. It takes only a few minutes to set up the 3D model and see exactly how the connection looks like. From there the profile templates, at both ends of the lateral, are obtained in DXF / DWG format. The thickness of the lateral pipe is taken into account to comply with AWS welding requirements. This approach is frankly cheaper than any other method. There is no need for any fancy software nor sophisticated equipment to achieve always a perfect fit and welding.
How do I get the info you don't show how it's done just before and after or is this bs
I understand you can't give away a "secret" design, but for goodness sake, give us an idea what we are looking at? A template? A way to measure? A technique? If your selling, I have to see what I'm buying!
I wish I could continue to thumb down this waste of my life.
As an insulator, typical fitter wasting time and putting me behind the ball.
Unions aren't going to give away their methods.
It's in the black pipefitters handbook, really easy, You set your pipes where you want them then use a flat edge (soapstone) to trace the outline of the branch on to the header. And use a marker held at a constant distance on the soapstone to trace your branch....
Hi
You forgot the part about it STAYING SQUARE TO THE PIPE, WHICH IS EASIER SAID THAN DONE.
What page in the black book is it on?
He says"thats a lot of work "laying out a template ...not that much work. I've been a pipefitter/steamfitter for over 35 years and have learned a few things to get great results, the current quality of workmanship is the problem, and lack of quality training.everthing on an app..whatever..the dumbing down of everyone is the result of this. Knowing what formulas used to obtain quality results is imperative, not dumbing down of the workforce. Good luck with your "trick" and propagating more dumbing down..😒
You guys didnt show us how u developed ur pieces using quick fit.wy.u just skipped it at around 10.43minutes and came up with ur piece already marked.I am bored.dont be selfish
Hello should've been using the handle of that grinder at the beginning of cutting that pipe....
somebody obviously got hold of a union video, cut out the important parts, and then posted it to make the union look bad. go to advanced pipe training and it's just a parked website.
I'm sorry perhaps I'm the idiot. I thought the whole reason for this video was to do it faster. You still have to lay out. You do layouts to get curvature of your cut out. The transfer to pipe and cut. If I was just going to do the pipe cut fit up. Why would I need to lay it on a sheet and make template. Maybe I just didn't understand the video😒
It's so easy, i can even use just welding rod to make it, no need to measure just make sure u put the pipe in exact degree. Hehe
This video is a total scam, sham, whatever you wish to call it. For all we know they could have spent the whole previous week developing those intersections the traditional way.
Sounds like some snake oil salesman.
I have a lot of respect for these guys however, I agree with some other comments. I watched the video but learned nothing. What are they selling?. At least tell us what the product is "educational video, templates, a tool, etc". My assumption for getting a proper cut would be to set the lateral in place then trace around the header with a extended marker. This would scribe the proper arc onto the lateral. After cutting put the lateral back in place and mark around onto the main header. If there's an easier way let us know in the video and it might be worth another look.
Douglas McElroy they're trying to sell you a product click on the link below the video and go buy it they're not going to tell you something that valuable for free.
This is so 1960's. I'm retired now, but in the early 1980's I used to program an 8kb Sharps pocket computer to template any shape, any thickness, angle, offset centre, any number of ordinates, set in or set on.
I could mark both ends of an oil rig bracer straight off the computer, or use a small print out strip with the cut back dimensions, cut both ends and guarantee a perfect fit.
Where the angle was tight I could run the program for an OD to OD fit back bevel anl mark this over the
ID on OD line and make a transition join between the two preps.
thank u sir for this video,but where is the exact computation demo?
U never should us how u made the template
I have to agree with most of the other comments here it was low life to even put a video on here like this and get people interested in it and then not show them the evidence of what they're saying works well I don't have time to make the video right now by the grace of God only I've been a pipe welder and a fitter and I started in the trade oh, probably 40 years ago , and I know how to fit up any pipe any pipe, any degree or slope, believe me you don't need these template books and even though I know right angle trigonometry and glad I do and I understand how to do a lot of things by the book but I can take a roll of paper that goes on cash registers I could quarter or 1/8 or 1/16 even coordinate lines on a pipe , using soapstone and I can take bamboo shoots and I can show you a trick with 3 foot bamboo shoots sold at hobby villa or walmart, I can show you how to mark off piping coordinate sections and just zip cut it real fast with a plasma Arc torch wasn't that crazy to use a speedy cut disc like they're doing to cut that drawn out section and no telling how many times they had to put a new disc on the grinder, all they had to do is just take a plasma torch and in 45 seconds that would have been already cut and then just buff the edges, that in itself told me right there that we was looking at a lot of hit and miss here and who's going to pay money like one guy said below who's going to pay $90 for something they don't even get to see showed, oh what a rip-off this video is.
moseseseseses I could tell about 3/4 of way through your paragraph when you were talking about them using a cut off wheel that you didn't know what the hell you're talking about. You go to refineries and nuclear power houses like that you can't just fire up a torch anywhere or plasma cutter you better be able to use that Metabo or get run off the job. just because you can clip the end off a piece of receipt paper and put your coordinates on the pipe doesn't mean that you can actually lay it out and make it work either. you notice it fit up really good they didn't have to put all thread rod in there like what you probably do. stop hating Union and join one
by waisting our time and then by saying you are with the union you just degrade the union
bad video, not showing how to do it. very bad illustration.
Anyone can tell me where found a book quick fit?
video cut off 10:35 .
I watch this entirely and learned nothing. What the heck!
U only show how to make a template quickly
What's the technic ,????? , I'ant see nothing
You forgot to put your breathing mask on
Garage video shows you nothing.
It's called scribing, trim Carpenters I've been doing it for a hundred + years. So he didn't come up with s***, just mimicking a woodworking technique.
yes, very ridiculous stupid video-- didn't show us anything--just a lot of bragging and they didn't even deliver.--R.W.B
You guys are fake miss representing
You without skill
I worked in Dubai Saudi now settle in uk
I am gas rig mig stick welder running my own company wish to have company in Canada
Any investor welcome
I agree with you Joseph - what a lot of hot air. I think they've all been standing in front of the mirror too long. It was all about "look how good I am".
Covid 19 brewing
I need to buy pattern
Please let me know how can buy one
Hi Sergio, please check www.etubespro.com
what is he selling? I don't understand. you would have to buy a hole bunch of thin pipe at diff. angels?
Ok I can lay out with different techniques been doing it for years never done it this way but I’m sure it is what he’s talking the easiest way to explain it is position the pipe exactly the degree and position you want it you a welding rod are tig wire that is longer then the widest gap on the intersecting , make a scribe mark on the back side of welding rod are tig wire in mutable spots around the pipe , the closer the marks are the better the fit connect the dots , another way of doing it also by putting marks on the welding rod are tig wire and transferring it over on to the pipe hope I helped the ones who didn’t know this method and for the others if you know you know
there's already a company called quick fit. make the template off the already cut pipe. that's what I've been doing wrong
just an inforercial
All child’s play
I need a job sir
Please formula
This video does not show at all how they do it! Must be Magic right? My pure guess is, align the new pipe in the desired position, offset, angles etc., tack in place, find and measure the biggest gap, then very carefully scribe that distance always parallel to the new pipe (a little tricky) on the new pipe against the would be intersection with (also a little tricky) the fixed pipe and mark all around the new pipe, cut the tack and then go cut the pipe. This is very similar to trim carpentry scribing with a compass only on two round pipes instead of a "straight" piece of wood and a wall. This does not sound like "hack and slash" to me. Am I close to guessing what is in the $90 video? There may still be some very valuable instruction in the video for how to do this easily in some of the more difficult situations but I do not know what is in that video. What has the guy with 20-30 yrs experience been doing?
Hey Bro, its very simple i've done this long time ago and im the youngest at that time and nobody believes me how quick am i in fabrication from 2"-36" pipe it will take only 6-10 minutes when you scribe your template then cut, time of bevelling defends on the contour & dimeter of the pipe . no secret, no special tools & calculator bro. just a simple carton or cartboard box and inbetween is the corrugated part, cut it on your desired width & diameter i mean just like a wrap around, insert the tig welding rod on the corrugated part.. viola!!! the magic of pipefitting video part 2:20-2:35, 4:35-5:00, 9:30-10
Agree with you Joseph Stokes, showed nothing, bla, bla bla.......
Assuming that you're actually selling something since you don't share any details whatsoever....I would go ahead and say great job inventing something the trade hasn't needed for a couple decades. In case you haven't noticed these days we have these neat machines called computers that layout perfect coordinates everytime, and a fancy newfangled contraption called a Vernon tool that uses that perfect layout to make a perfect cut everytime. In the field everything comes pre-fabbed from the shop, rendering this fantastically unimportant. In 17 years in the trade I've laid out co-ordinates to fit a lateral or dummy support a grand total of ONCE....and that was in trade school. Since then I've completely forgotten how to do it out of a total lack of necessity to remember! So if I ever perfect the time machine I've been working on I'll be sure to take you back to 1960 and we'll all be rich!
Stephan Lebrun not everyone has a vernon tool handy. As far as lateral and dummy legs, fish mouth etc, I do them consistently. Not sure where you do your trade but in the UA we do all the time. Been doing it for well over 30 yrs. .
Hindi me video
What the hell? Where is this magical method/technique/product?
It works I figure out Their method tow or three measurements all your doing is tracing it onto the Pipe
i do this job regularly and this method does save time, however this video didnt actually show him layout the cut line. he showed how to get the leg set for layout but didnt actually show how the line for the proper fit was drawn on the pipe. total waste of time sorry boys
+phil surridge You're right ...he did'nt explain.how the line for the proper fit was drawn.
..stupid video . waste of time....!
Daniel from Paris F
I am a good ss pipeline welder. Any body have job for me?
To book name fabrication and piping please sir and civil structure book name
I hate that thin walled crap it's never round and never matches up right.
I am febricoturs
Why keep video up if website is no longer in use. How else is anyone suppose to buy it
orrrrr....you can download $5 app iTunes app store. Love it. I use it all the time works great!
wow he cut that with 4 inch side grinder. Use plasma arc.
I'm a pipe fitter at gas plant project now here in kuwait..... I think i can figured how they do it... In one year time i work in underground jobs (rtrp & road crossing field erection), small bore in fabrication shop, now assigned at worksite in pipe rack pipe erection....
Background civil eng'g technology (gradute), 4 years bs-civil eng'g ( under-graduate), 1month acad training course, 3 months pipe welder training course, 3 days pipe fitter training (wire bending, take-off)... :D
Bro, carton lang yan saka tig welding rod.
All that education to fit pipe?what a waste of money and time. Bet you can spell..overqualified..lol.
This Video is a waste of time don't explain anything
where is the demonstration of the product??
all that talk and you did not show a dam thing I call bs on this
I use the app saddle calculator. I was excited to see how to do an off center lateral. Waste of time.
I see only how to cut but i didnot see how to make a template
Yeah, pretty ridiculous...
how to get downvoted in 15 minutes or less
Tamplet Daraing and fabriceson book Pej photo
Elbow also saddle formule????
Local 568 representing
Waste of time,what the heck..!
Just buy a Mathey CNC machine
How did they make the template?
thanks for nothing.
This isnt even a hack
U Talk a lot for nothing
what the hell is that ?
what formula lateral hole
sure is easy on sch 10.
Great! you have a perfect result
I'm Pipe fitter
Nest video
nothing new
very nyc
great job
Wla wenta
👍👍👍👍👍👍👍
I just got this DVD yesterday and after watching it I have to admit that it's so simple and worth every penny of $89, working with pipe will never gonna better. Awesome iDea. Simply the Best, leave all the tools at home, you will not need it anymore.
i wanna buy it. but i dont want just waste my money..does it really works ?
+Raul Benitez yes it works perfectly and so easy once you watch it you will never gonna need that dvd again. Now I feel like among all my welder friends I know something better that they will never gonna know.
How can you get the DVD
I am trying to find the dvd any one know where I can get it?
HKSaathi C4K-Productions....All lies. I've been fitting pipe around the globe for 28yrs now, offsets are neither time consuming nor complicated. To the young fitters out there, save your money and don't buy this crap. Trust me
how about larger pipes 24" to 60" you also u sing template? stub-in/ stub-out is not the same thickness
Good,so what is the quick fit system or is it not for public knowledge
Robert warburton you got to buy it man they're not going to sell you a trick of the trade like that on a RUclips video for free