GE Water Filter Hack! Save Money!

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 104

  • @joelkayne9820
    @joelkayne9820 6 месяцев назад +3

    Wish I would have seen your video before I bought and replaced the GE filter. I won’t make the same mistake again!!! Thank you!!

  • @dougtruex4632
    @dougtruex4632 7 месяцев назад +13

    The only thing I’d add is that my first stick-on didn’t work, so I looked at where the label lines up and adjusted the height of it and it worked.

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  7 месяцев назад +1

      Thank you for sharing your experience. I know that will help others. Thank you for watching and have a great day!

  • @nicholascollinsre9300
    @nicholascollinsre9300 3 месяца назад +4

    This is the fastest and most convenient way to use the less expensive filters. I didnt even use a hair dryer- just stayed real patient and pealed it off, then stuck it to the back of the fridge. Note: I had to stick the label a bit higher up than the video to ensure the sensor lined up with the interior fridge sensor. Works like a charm:-)

  • @Chris-hw4ui
    @Chris-hw4ui 7 месяцев назад +7

    I just did this today. It was easy and works just like you said. Thanks.

  • @georgetynes9881
    @georgetynes9881 2 месяца назад +5

    Worked great! Thank you kind Sir!
    3 filters for $27 instead of $50 or more for one. Now let’s just hope they work/ taste as good also. Worth a shot.

  • @BlueprintASMR
    @BlueprintASMR 4 месяца назад +7

    Your video worked and i was able to buy 3 filters for half the price of one GE filter. Thank you!!

  • @vdcg2010
    @vdcg2010 10 дней назад +1

    Thank you for this money saving hack, $49 plus shipping and tax for 1 filter is ridiculous, again thank you and will sub your channel 🙏🙏

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  7 дней назад +1

      Thank you very much for the comment and yes, it is ridiculous on these prices and they’re trying to make you buy it from them. I’m so tired of companies doing that. Thank you again for watching and have a blessed day.

  • @Bryan-ms4kz
    @Bryan-ms4kz 5 месяцев назад +24

    GE is scummy for doing this..

  • @allisonbryant6424
    @allisonbryant6424 4 месяца назад +4

    Thank you so much! I didn’t know what to do!! Y’all are a lifesaver!

  • @mattkojetin8198
    @mattkojetin8198 Месяц назад +2

    I just put the old label on the new one. If you need to you can use a piece of scotch tape to hold it in place. Line it up approximately where it was at on the old one. Then make your calendar six months out to remember to change it.

  • @cind3913
    @cind3913 5 месяцев назад +1

    Going to try this ! Not spending 60 on a filter! Dont buy GE Fridges people ...wish i done my research first! Hopefully this works!

  • @L5UT1G3R5
    @L5UT1G3R5 11 дней назад +1

    Thank you! Is there any work around to get the filter light reset? Its beyond ridiculous that even if I do this hack that I won't have the filter light button feature on a brand new Fridge!! Crazy.

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  7 дней назад

      Unfortunately, there’s no way to get around resetting the filter light because it knows it’s the same chip that’s been in there. It would only reset if it was reading a new chip, which means you’ll have to buy their water filter. Thank you for watching and have a blessed day.

  • @evnaccd
    @evnaccd 4 месяца назад +3

    This worked great. THANK YOU! Saved the average Joe who thought GE was for Americans, but no they do this scummy practice of placing these things here to force us to buy these high cost filters. Again thank you my friend.

  • @carrieferro9958
    @carrieferro9958 3 месяца назад +2

    You're a real MVP, thank you so much for this info!

  • @arkorott
    @arkorott Месяц назад +1

    Works like a charm! Thank you

  • @nomadrunner226
    @nomadrunner226 7 месяцев назад +3

    Does anyone know when you take the chip off and put it back on will it reset the filter status/light? Thanks

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  7 месяцев назад +1

      It will not reset the filter light. As far as that goes it thanks it’s the same filter. That’s why it will not reset it.

  • @pambilodeau2993
    @pambilodeau2993 Месяц назад +1

    Thank you so much for sharing this❤

  • @tyreeshathomas7092
    @tyreeshathomas7092 Месяц назад +1

    Should the light change from orange to green or with this hack does it stay orange

  • @barbbender2640
    @barbbender2640 Месяц назад +1

    I just bought 3 xwf filters for my ge fridge that takes a xwfe filter ( as per GE website). The Xwf should not work in my fridge. So, I carefully took the label off my XWFE filter, and when I looked at the backside of the XWFE filter, there was no chip, just a blank adhesive label.
    So I put the XWF filter in my fridge and it worked. So, there isn’t any difference between my XWFE filter and my XWF filter. I wonder if GE is sticking the new XWFE on XWF filters….. very strange. Of course, this is what class actions suits are all about!

  • @Rad_Dad_Gamer
    @Rad_Dad_Gamer 24 дня назад +1

    Any idea how I was able to buy a GE filter that is in a GE box, but doesn't have a chip? It says genuine GE filter too and has instructions that say GE. I didn't jnow a XEFE filter could be bought without a chip.

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  17 дней назад +1

      I do not know. The XWFE's chip uses radio frequency identification (RFID) technology to communicate with the fridge. This allows the fridge to authenticate the filter's origin, detect leaks, and determine if it's a genuine factory product. Generic replacement filters cannot replace the XWFE because they lack the RFID chip.

  • @mroliverridley
    @mroliverridley 3 месяца назад +1

    You can also use nail polish remover or acetone to gently melt the glue holding it on for an easy peel off.

  • @shermangriffin4668
    @shermangriffin4668 2 месяца назад +2

    We all should stop buying GE. I know I will not buy any more. Ty for the hack.

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  Месяц назад +1

      I agree. We are all for companies and people making money, that’s the American way but to limit it to only buying replacement parts from that company is BS. Thank you for watching and have a blessed day!

  • @lequang2296
    @lequang2296 3 месяца назад +1

    Wow ! You are the Man
    Great clip
    Save money too
    Thanks for sharing

  • @msk3905
    @msk3905 3 месяца назад +1

    What is the purpose of the RFID chip in these filters, just gives you the filter replacement light or stops water flow?

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  3 месяца назад

      The purpose is so you can only use their filter. If you put a filter in that doesn’t have it, it will stop the flow of water. Thank you for the question and for watching. Have a blessed weekend!

  • @eanddv7844
    @eanddv7844 Месяц назад +1

    Just tried your hack. No error code. Water is flowing through generic filter. My question is: will it still allow the ice maker to work? T. I . A.

  • @michaelg.117
    @michaelg.117 5 месяцев назад +1

    You're the best! Works like a charm! Thank You!

  • @ChrissyLeppla
    @ChrissyLeppla 3 месяца назад +1

    I just tried this but it didnt work and I kept getting the Err code whenever I pressed the water button. The work around for me was, I took the XWFE label and applied it to the new XWF filter and it worked. Fridge is only 6 months old so I'm wondering if the newer models will not read the chip since it's backwards when stuck to the back of the fridge.

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  3 месяца назад

      Nothing would surprise me with how they try to make things difficult for us. Thank you for sharing and have a blessed weekend!

  • @carlaestling8301
    @carlaestling8301 2 месяца назад +1

    Thanks, will try it!

  • @gregdede9855
    @gregdede9855 4 месяца назад +1

    great i was about to open my new filter and old one

  • @abcdq2
    @abcdq2 6 месяцев назад +2

    I purchased a GE fridge 6 months ago with this exact looking RFID filter replacement requirement. My Filter status is currently at 1% remaining. I successfully removed label and taped it to the back and put original filter back in and still working..My Question: After it reaches 0%, will it stop dispensing water? And if so what do you do next? Just swap out with a new generic filter? (I purchased some and already made sure they work with old RFID chip) ....or Do I remove the sticker and reapply it? How does the water begin dispensing again if it stopped dispensing? (There is no reset button on my recently purchased fridge, so do you think I may have to unplug fridge to reset it?)...just trying to anticipate the entire process of using cheaper filters. Thanks.

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  6 месяцев назад +1

      It sounds like you are good to go. You will put in a new generic filter and just write a date on there six months from the time you put it in and that’s how you will know to replace it. Unfortunately, there’s no way to reset anything because it’s reading that you have the same GE filter in there. That chip is only there so they know there’s a GE filter in there if that chip was not there and you put that generic filter in there it would not work because it will not read a GE chip. Thank you for watching and have a great week!

  • @TrustinChrist-truthseeker
    @TrustinChrist-truthseeker 4 месяца назад +1

    What is the best way to get off the label? I got off main part but there is still that back part of the circut that I wasn't able to. It does not help that it is foil thin and tears extremely easy when trying to get off.

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  4 месяца назад +1

      You just have to heat it up good and peel it off slowly. I had the same thing happen to me when I was making the video. Thank you for watching and have a blessed day!

  • @CM-ej5hs
    @CM-ej5hs 2 месяца назад +1

    You are a dang genius!

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  2 месяца назад

      Thank you for saying that. My wife got a good laugh. She never heard anyone calling me a genius. 🤣😂 Have a blessed day!

  • @moisesperez4659
    @moisesperez4659 Месяц назад +1

    My GE cafe works with xwf. $50 for a filter every 6 months is outrageous. Xwf cost around $15

  • @stephenwilliams3305
    @stephenwilliams3305 5 месяцев назад +1

    Excellent! Thank you. Stick it to the man!

  • @gavintieng7110
    @gavintieng7110 3 месяца назад +1

    Gonna try this out

  • @andresramirez3000
    @andresramirez3000 5 месяцев назад +1

    Do you have the link of where i can get the amazon fileters?

  • @Patriot--ch5kg
    @Patriot--ch5kg 3 месяца назад +1

    Is there another hack? This didn’t work. I think the chip broke when I removed it

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  3 месяца назад

      You can put an inline filter on the outside going to the fridge. Thank you for watching and have a blessed weekend!

  • @Bebopfishing
    @Bebopfishing 8 месяцев назад +2

    Awesome thank you

  • @Sgtmajorsir
    @Sgtmajorsir 4 месяца назад +1

    Anyone try to get the RFID out of the free bypass plug and also use the water filter????

  • @stevenlengua4179
    @stevenlengua4179 6 месяцев назад +2

    Couldn’t line it up or something. Didn’t work for me. Stuck ordering another filter but first I’m going to call GE and let them have it!

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  6 месяцев назад +1

      Sorry to hear it did not work for you. Go ahead and buy another GE filter and then when that one’s done try it again. In my testing for this I actually went through three GE filters because one of them the chip did not come off clean and it left some residue on the filter so it did not work when I put it on the fridge. So that is always a possibility that that chip just did not come off clean. But again you can always try it next time before you buy another GE filter. Thank you and have a great day.

  • @Binoculars840
    @Binoculars840 6 месяцев назад +1

    I switched the labels but the filter light is still red and reading 0% left

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  6 месяцев назад +1

      Thank you so much for watching. Unfortunately, because we are using the same label it believes it’s the same filter so the light will always be red. You’ll just need to put a date on there which I do six months and replace it every six months. Thank you again and have a great day.

  • @karenthompson4251
    @karenthompson4251 3 месяца назад +1

    Interesting. I just replaced my filter with a "genuine" GE XWFE and took off the label on the old "genuine" GE WXFE and there was no RFID chip like you had. I bought mine for less than 1/2 price online and, who knows, maybe they're good fakes but I'm not having a problem with them. (Now adding an edit -- I wonder if maybe my Café model doesn't really need a WXFE even though the lit says yes. I need to manually confirm on the control panel that the filter has been replaced. So maybe I lucked out that my cheap knock off is OK.)

  • @zylophone4840
    @zylophone4840 6 месяцев назад +3

    Thanks! It sucks that GE does that.

  • @martydonnawinger
    @martydonnawinger Месяц назад +1

    I will never replace my GE refridg filter again, because my water comes from a Watts 4 filter R.O. unit!

  • @Christian_and_proud
    @Christian_and_proud 5 месяцев назад +1

    THANK YOU!!! I just bought 3 filters from eBay that are all useless! GE is sooooo dumb!!!

  • @Forever_yours44
    @Forever_yours44 3 месяца назад +1

    Thank you!!!!!!!!!!!!!!!!!!!!!!

  • @jeffh9288
    @jeffh9288 2 месяца назад +1

    Thanks was tired of paying 50 a pop, I want to buy you a beer

  • @CafecatechesisTV
    @CafecatechesisTV 4 месяца назад +1

    Ge is soooo scummy! And this guy is brilliant!!!

  • @barryrobbins7694
    @barryrobbins7694 4 месяца назад +1

    I won’t be surprised when fridges require internet connections. These tags cost almost nothing. Too many companies are preventing people from repairing their own products or requiring customers to stay in the company’s economic ecosystem for parts.

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  4 месяца назад

      We just got a new printer at our job and we cannot use the generic cartridges for ink that we already have because of the chips that are in the new ink cartridges for that printer. You have to buy them from that company. Cannot stand this. 😡

  • @HollyPederson-i6i
    @HollyPederson-i6i 3 месяца назад +1

    Can I send you flowers?

  • @TheEmperorprakash
    @TheEmperorprakash 3 месяца назад +1

    No wonder consumer hate American brands.

  • @chuckmiller9469
    @chuckmiller9469 12 дней назад +1

    Thank you. Everything is a scam

    • @TheCoupleThatGrillsTogether
      @TheCoupleThatGrillsTogether  7 дней назад +1

      It definitely feels like that, that everything is a scam. Thank you so much for watching and have a blessed day.