I had no idea that there was so much technology involved in those rings, I'm glad I watched this video because now I can take apart the last two engines I put together and check the rings
Order from these guys. Products are sometimes backordered, but they deliver every time at the best prices + free shipping! So awesome! Now, please get here soon back-ordered intake!
Thank you for the video. About to get new rings for my old Golf 4 and i was wondering if i really need any special tools to install the ring. Good to know that it's actually that simple and i can save the money :)
Good night I have a question I m watching you set the rings and I have been setting my compression rings on the minor and major thrust side all the time and always experienced a good compression but my question is if your way would make it even better
I got the exact same ring kit, but never received a groovelock spacer. i only got the top ring, second ring, the wiper rings and the expander ring. I got 3 packages in my set of rings, none had any extras.
@Summit Racing i'm installing piston rings,, four pistons goes perfect, fifth oil rings package sits too tight almost not turning at al, what could be wrong, i cleaned them, tried another set, still very tight, Wiseco #K394XS pistons
Hi. All of your playlists are not aligned in sequence, so this makes me confused to know what vidoe came first For example, i find a video which is a year old, then, vidio four years old, then, vidoe one year old. I don't know what to watch first. Finally, thanks you your great & informative efforts
Does the dot on the 2nd ring face up or down????? I know the dot on the oil ring lock faces down but the 2nd ring that also has a dot does it go up or down???? Thank you and God bless😇
Never use the ring pliers when you use them you open the ring wider then rolling them in like this guy is doing. You can break rings with the pliers and/or distort the shape which can make them have too much tension when the piston is installed causing the cylinder wall to wear out. If you know what ur doing then you will know if ur going to far when using pliers but if you don’t do this work often just do it like this so you don’t mess up
no video show why and how to put oil rings, shouldn't jump this part, the spring oil ring the end of the ring should point up! like this / \, so when compression up it block the air and when down it's open and can left some oil.
I had no idea that there was so much technology involved in those rings, I'm glad I watched this video because now I can take apart the last two engines I put together and check the rings
You guys need to make a playlist for this series. Very useful information.
We do have one you can check out here: ruclips.net/video/4T0XVCOtkEU/видео.htmlsi=YR7Q6GmmAdk7mK5f
Thank you for watching!
I'm here cause I've been doing this a long time and a refresher never hurts to stay up on the basics , and you might learn a new trick!
Thank you for watching!
Order from these guys. Products are sometimes backordered, but they deliver every time at the best prices + free shipping! So awesome! Now, please get here soon back-ordered intake!
Thank you! We appreciate your kind comments and your patience!
THANK YOU SO MUCH!!!! I AM STILL LEARNING HOW TO INTALL PISTON RINGS CORRECTLY.
Thanks for watching John !
The groove ring and oil rings have been whooping my ass to install!
Same, the rings summit told me to use stick out the pistons still and the oil ring stick out even when fully compressed
THANK YOU SO MUCH!!! I AM STILL LEARNING THIS CONCEPT AS WELL. IT IS VERY IMPORTANT!!! GREAT VIDEO AND THANKS FOR SHARING!!!!
Glad you enjoyed it!
Glad you guys made this video I was wondering what those rings were for.
Thank you for the video. About to get new rings for my old Golf 4 and i was wondering if i really need any special tools to install the ring. Good to know that it's actually that simple and i can save the money :)
The video i needed and glad it was 1st on the utube feed
What do I do if the oil rings stop the piston from going in the bore? Do I file then to close more or something?
Good night I have a question I m watching you set the rings and I have been setting my compression rings on the minor and major thrust side all the time and always experienced a good compression but my question is if your way would make it even better
I got the exact same ring kit, but never received a groovelock spacer. i only got the top ring, second ring, the wiper rings and the expander ring. I got 3 packages in my set of rings, none had any extras.
GREAT VIDEO & A GREAT EDUCATION!!!! THANKS FOR SHARING!!!
How heavy is the top engine cover to get to the pistons? Thank you for a great film.
Thanks! Perfect video!
Is there a spacing tolerance between the ring ends???
What diferent first and second ring please
Didn't quite catch what you said, does the dot/writing faces upward or faces down?
@Summit Racing i'm installing piston rings,, four pistons goes perfect, fifth oil rings package sits too tight almost not turning at al, what could be wrong, i cleaned them, tried another set, still very tight, Wiseco #K394XS pistons
Hi. All of your playlists are not aligned in sequence, so this makes me confused to know what vidoe came first
For example, i find a video which is a year old, then, vidio four years old, then, vidoe one year old. I don't know what to watch first.
Finally, thanks you your great & informative efforts
Hi! We apologize for the confusion. Here is part 2 ruclips.net/video/knJNcI_pRrM/видео.html to this video. Thank you for watching!
Need a video on how to gap them now
Does the dot on the 2nd ring face up or down????? I know the dot on the oil ring lock faces down but the 2nd ring that also has a dot does it go up or down???? Thank you and God bless😇
Up
Thanks & regards 🙏👌
The second compression ring I thought had a dimple indicating install orientation. Was that installed up towards the head or towards the pan?
The marker faces towards the cylinder head. It doesn't matter what brand of ring you buy, the side with the marking faces the cylinder head.
Thnq for ur valuable information sir...
I use special tools for installation piston rings.
OLÁ Summit 02/11/24 Quem foi que o convenceu que sabes montar anéis? (ele mentiu). RUK
Get more knowledges about your video.thanks and suscribed yet for other videos
Oil ring gaps ???
Never use the ring pliers when you use them you open the ring wider then rolling them in like this guy is doing. You can break rings with the pliers and/or distort the shape which can make them have too much tension when the piston is installed causing the cylinder wall to wear out. If you know what ur doing then you will know if ur going to far when using pliers but if you don’t do this work often just do it like this so you don’t mess up
no video show why and how to put oil rings, shouldn't jump this part, the spring oil ring the end of the ring should point up! like this / \, so when compression up it block the air and when down it's open and can left some oil.
I’m here trying to learn from scratch
GMC piston ring change 2015
I dont have locks....
Abu Sadek