ANI Skull Unboxing & Patern Test, ANI Black 200 Ltd Edition With WB, HVLP & Clear Caps
HTML-код
- Опубликовано: 28 сен 2024
- Unboxing of the ANI Skull Kit, this kit is great value as it comes with 3 different caps, a detachable digital gauge and is extremely good looking, we be using it a lot for the next few weeks to see how it performs, hope you enjoy the video 👍
Full review of the ANI Skull.
• ANI Skull 1.3, ANI 200...
Please Subscribe My RUclips Channel, link below
/ @peteshobbies5383
My Top 12 Mini Spray Guns Video,
• Top 12 Mini Spray Guns...
Comparing different clear coats;
• Clear Coats, Mipa CX4,...
Where I purchased from,
spraygunsdirec...
Follow on Facebook,
/ petes-hobbies-10370917...
Follow on Instagram,
/ petes_hobbies
Music: Shanhai
Musician: FOREVERT
URL: icons8.com/music
All my videos are made for entertainment only, the views expressed are my own and should you choose to follow them you do so at your own risk.
Products, materials, machines and machinery used can be hazardous if used inappropriately, for your safety all will have instructions on there safe use either by contacting the manufacturer, viewing on manufacturers web sites, viewing there operating instructions or via technical data sheets, ensuring you are familiar with all this information will help with safe use of equipment and products.
Your local health and safety executive with help with information for the safe use and disposal of materials in accordance with your local environmental health regulations.
Thanks for watching
You are truly an asset to the spray gun lovin’ community Mr. Pete! Nobody dives in like you and shows the differences/similarities/ interchangability, etc. like you do. So many are just “influencers” scoring free products. Your content is truly appreciated 🙏🏻
Hi buddy, and thank you 😊, I try and look at the differences in the guns, both on a performance level but just as much from a mechanical point of view.
I genuinely find it interesting, and that sounds like it shows. Thanks, mate, I appreciate it 👍
👏👏👏 got more guns than my local paint supplier keep taking the tablets bro 🤣🤣🤣
😂🤣😅 Thanks Dean, i really can't help myself 🙄 , i did start to make a list but gave up, it's embarrassing really and would make me question my own sanity, so far better to not know and just say a fair few 😏, cheers mate 👍
I've seen your vids TWICE. Splendid content, Gov'👍💯 TYVM
Thanks mate 👍
Hi pete great video as usual mate just seen them on Ebay and spray gun direct do there do a all in black one in stead of the skull type are you getting a pop up spray booth next you got everything else
Thanks mate, no pop up booth for me, I'm doing ok in my workshop, they don't do the kit in black, they do the ANI Black but it comes with one of the caps not all of them, it's a great looking gun in gold and black mate, really nice 👍
@@peteshobbies5383 would like to see what a sprays like with the other guns 🔫 you have
Could you PLEASE try out other unknown guns? Like, NoName & Samer, brands? TYVM Gov'👍💯👀
Hi mate, we don't get the Noname guns over here, the Samer is just a Chinese Devilbiss copy, I do have a few copies but there not build that well, I've hardly used them and one is not sealing correctly at the tip so pulses
Can you help me my friend? Ani skull or iwatta w400?the money are the same for those paint guns here in Greece.
Hi Mate, if the price is the same, I would buy the ANI Skull , it performs better than the W400 in Bellaria form
@@peteshobbies5383 thanks my friend
@78bodywork You're welcome buddy 👍
@@peteshobbies5383 better than super nova iwatta ?
Hi Pete, can you change the battery in the gauge?
Bought 3 Sata Adam digital gauges once, cost £450 & nine months later they all died.Unbelievably the batteries were non replaceable.
£450 for zilch!
Thanks Sata.
Hi mate, yes, as far as i know you can, that's what the second little kit is for in the plastic container, it's gasket and screws for the digital gauge, really nice touch putting that sort of stuff in the box including a service kit for the gun as well.
I've seen the Adam gauges but never had one, didn't realise you couldn't change the battery's, that idea stinks to be honest especially in a day and age of supposed recycling 🥺, cheers mate 👍
The newer one, The Adam2 has a replaceable battery but not the original.You could have x12 Ani ones for the price though!
Quite an oversight on the original Adam to say the least!
Hey Pete, alittle off topic from the video but what paint system do you use? I’m in the market for a smart repair system and I’m wondering if the system you use is easy to use?
Thank you.
Hi Daryl, I use the Kapci one, I have the basecoat kit and 2k direct gloss system, there stuff seems pretty good and the prices are really good, there 2k clear is good as well
@@peteshobbies5383 Do you use the app or just mix your colours you want?
Hi Daryl, I use the app most of the time or i do it on there website, they used to have some software that you downloaded to a pc but they have now supplemented that with a web address, you need to register and the place you get the kit from should be available to supply you with a customer code or just contact Kapci and they will give you a code
@@peteshobbies5383 thanks mate. I’ll have a look at the kapci one
Hi Pete that's a great looking gun mate and a very comprehensive kit with everything you need, I like the digital gauge and that it includes a temp gauge built in as the air temp also effects the way the gun sprays and is something we don't normally check as it can be different to the ambient temp that a really nice addition.
Is the WB cap purely designed for water based or does it say it will do solvent as well, I don't really see any reason it wouldn't do solvent but I'm sure you will be trying it. The gun design does look very similar to the Sata guns but but the gauge works and looks like the DV1.
I'm really looking forward to seeing your thoughts on it and how it sprays as for the price it looks to be good value for money as it's not a bad price, cheers Pete👌🙏👍
Hi John, yes, you can use the WB cap for solvent as well, looking at the pattern i think it will be a good clear cap also, I've used all the Iwatas WB guns with solvent and they work well.
I've been trying a few waterbourn paints and the spraying style is slightly different, pressure is a bit higher, distance from the panel is more and speed you move is a bit faster, that's all general comments but imo it sums up what i have found.
Yes, looks lovely, probably my best looking gun although the WS400 would push it close, on the face of it a bargain, i got it a few weeks ago as it was a special order but sprayguns direct are keeping them now, I love the digital gauge, it's there if you want it but mostly i won't so it's great to just take it off, cheers mate 👍
That's a good idea to be able to remove it and still use the gun, apart from the Walcom I don't think there is another gun that does that but even with the Walcom all you are doing is removing the readout part but the actual regulator is still there.
I haven't tried anymore WB paints since I did the gold which was a long time ago now, I still have that paint but I don't know if it will be any good now it's been kept indoors so no frost has been at it, I would like to see you do more WB base to see how you do it mate as I made a right mess of it🤦♂😂
You'll probably be ok with it now, you've moved on a fair bit since you last used it, I've done a video, not on RUclips yet doing a candy tank, it's solvent white as a base, waterbourn gold and solvent candy with obviously clear on top, think i used an ANI R160 from memory, it was just to show you can mix them, not together obviously but in the painting process, after all that's all you doing with waterbourn base and solvent clear, your paint should be fine mate, as long as it hasn't frozen it last ok, not as long as solvent which last many years but certainly a few years.
I've been using deionized water and pure iso alcohol to thin the paint, works fine but doesn't speed the drying process up as i thought it might, heat gun works fine as it moves the air and obviously heats it as long as you give it a minute or two for the metallic to settle otherwise it moves the flake about 😂 👍
Yeah I will give it another try when I change my colours again (which won't be long) I just want to get used to the WS400 first so the muscle memory is there then I will be able to just pick it up and lay a nice coat down.
I have some IPA which I think should be ok as a thinner, which do you think would be the best gun for it mate? I'm thinking either the DV1 base or the W400🤔thanks Pete👍
@@JohnWD40TC02 I think your paint is the same as mine from Advanced Paints which i think is Kapci, it doesn't need a lot of thinning, around 20 to 30%, the coverage is better than solvent as its more dense, has more pigment in it, I would try the DV1 but either should be fine.
Don't panic if the first coat looks rubbish, it seems to look like that but after the 2nd it looks fine, i think that's due to the amount of pigment again as the areas it's covered look completely coloured and areas that have received a little less look patchy, with solvent it's more even, I think that's why the WB caps all use more air to atomise the heavier density paint better, anyway, I'm probably over thinking it but you'll get there, you always do, cheers mate 👍
Pete
I had a question with the digital gauge on the spraygun. Can I also change the psi instead of bar reading?
Thanks
Hi Chris, no, as far as I know, you can't
Hi Pete, looks like a great gun. I'm a DIY guy that paints only my own projects, only a couple times a year at best. I have a DIY crossflow booth, with clean air and I'm looking to replace my two old Devilbiss GTI-620 millennium guns, one for base and the other for clear. I was looking at getting two Iwata kiwami 4 but now I'm thinking about just getting just one ANI Skull. Since I don't paint that much, durability shouldn't be an issue for me. I would like to hear your thoughts or other guns I should possibly look at for under $500 usd. Thank you in advance.
FYI, I typically spray PPG DCC or DBC Deltron
Hi Kevin, you won't go far wrong with the Kiwami4s or the Skull kit. It's always preferable to have a base and clear gun but if your not using it that much you'll be cleaning it properly each time so the need to keep separate guns is negated somewhat.
If I was given your choice I would go the Kiwami4 BA4J in 1.2 for base and the Kiwami4 WBX in 1.3 or 1.4 if you like your clear gun faster, you could probably get the pair of them in your budget and you would have a dedicated gun.
I have no hesitation in recommending the Skull kit, it is very good and should last well but you could probably get the other two for only slightly more? , cheers 👍
Would you happen to know the 3m pps 2 adaptor for this spray gun?
Hi Jeremy, yes, its part number 16033 or 26033 for the newer pps 2 system, it's the same thread as the Tekna Pro Lite so easy to obtain normally 👍
Hi Pete tentunya sangat bnyak alat semprot di tempatmu. Apakah Tidak ingin melakukan giveaway buat subscribermu
Hai sobat, suatu hari nanti saya akan tetapi belum, saya masih mengumpulkannya! 😂
@@peteshobbies5383 terimakasih, meiji f110 g13T untuk selanjutnya semoga ada riviuwnya dari pete
Hi Pete, i have the the tds about the pattern of the ani black and they reccommand 2.8 bar (clear and wb) from the regulator rp/1 (1.8 from the Digital ) and 2.6 bar for the hvlp (1.6 from the Digital)..
Hi Cristian, I did see a pdf with those figures but keeped them the same for the spray out just so the pattern didn't separate as it's a relatively thin clear , I'll try different pressures when I'm using it but i cant see it needing that much pressure for a good finish, indeed, it would be hard to get the HVLP up to that pressure for most people because they wouldn't have the air flow to supply a constant pressure.
Funny how the ANI guns seem to like pressure, the R160 is like that although the F160 is great at 29psi although it recommended a bit higher as far as i remember, cheers mate 👍
@@peteshobbies5383 yes, my F160 can also spray at low pressure 1.4 bar to replicate the finish of an old vw polo 😉
@@cristianb.4135 that is low, don't know if that says more about the gun or the finish of an old VW 🤔 🤣👍
@@peteshobbies5383 at such low pressure you lose a little bit of fan but you can replicate a lot of old German and Italian car-finishes... At 1.8 to 2 bar almost like a mirror( but only in summer)..
How much ?
Hi Lewis, link is in the description, they are around £418 if your in the UK
@@peteshobbies5383 thanks, didn’t realise it was in the description, keep up the good work 👍
Thanks mate 👍
@@lewiscypher4567 350 mate spray gun direct
Your running that at way too low of pressure . The clear coat cup should be at 2.8 bar on the digital gauge and the hvlp should be at 2.6 bar at the digital gauge They are very air hungry. But the best guns for the price
Hi buddy, ANI recommend 1.8 on the digital gauge for clear and WB and 1.6 for HVLP, i set it at 2bar on the bottom as the fluid i was using is quite thin and i didn't want it to separate, it would make very different to the patern i think.
I have been using it over the past few days and am not needing anything like the pressures ANI quote, 2.1 bar at the base for clear and WB give really good results, the HVLP at 2.0 bar is giving a great finish with solvent base with very little overspray, probably need a little more with waterbourn, certainly looks incredible value for money 👍
@@peteshobbies5383 The pressures you have stated is for the older ANI black without the digital gauge not the ANI Black TDM1 with digital gauge (Which is what the skull edition is ) Look at page 2 www.ani.it/wp-content/uploads/prodotti/istruzioni/verniciatura/ani-vicenza-chiampo-ani-black-tmd1-BY1417034B-ed_7.pdf
I think the one you have sent a link to isn't explained very well as the pressure doesn't make sense, it looks like it's saying the digital pressure is higher than at the base of the gun which isn't right, the PDF i have explains it much better and is for the TDM version, I have the PDF on my phone but can't remember where i got it from!, if you give me an email or contact me on Instagram i will send you it, it's quite comprehensive
That’s a cool looking gun Pete! I bet you can’t wait to test it out on a panel, Very nice case and equipment that it comes with as well. Cheers
Hi Steve, yes, it was a special order as Sprayguns weren't stockings them at the time but are now, I've been using it over the last 2 weeks trying all the different caps, been pleased so far and it's a great looking gun 👍
@@peteshobbies5383 Seeing these fancy guns really makes me think what sort of paint or coatings they use, so they are to not be affected by the thinners, I wonder this every time I clean my ANI with the light rainbow effect colour over it.
Most of the time it's a form of anodising but there are some that have a plastic type coating or Iwata use chrome on a lot of there guns.
I've recently got a Japanese Devilbiss Neptune spray gun and that's Magnesium alloy and that's got some really weard covering on it, makes the thinners pool up in little spots, like rain on an oil spill, very odd, it's really well made though, cheers mate 👍
I'm on a video watching binge! Keep 'em coming, Gov'! TYVM 💯👍👀
Thanks mate, hope your ok, i know some have video binges when there not well, cheers 👍
😍😍😍😍😍
Thanks as always buddy 🙏