Beautiful man! I had the red/black/moonlight dust 2019 Z900 they haven't changed much and I'm glad, sharp bike other than it didn't have the new tft display as now,anyway I just left a Ducati shop yea the Ducati monster is a killer bike but still I'd rather have that kawi Z9, that 948cc inline 4 is music man
I have the same bike. I’m going to replace the grey plastic parts of the fairings with black ones, I also wanted to remove the stickers and got a red new set, but I did not find the stickers for the wheels (similar to the original ones of course).
Yes I thought about replacing the grey parts as well. Considering vinyl wrapping them myself. Just cannot decide if I'll go with black or some other color.
@@rich075I too have the same bike. I haven’t removed the hi viz decals but really like the way it looks. Makes me regret the seats I bought with the hiviz stitching lol. I also replaced the gray parts, the headlight ones got black and the side ones are now carbon look. I like it much better than the gray.
I have not replaced it but I did flip the rear rubber pieces after seeing it done on another RUclips video. It is a noticeable difference. I don't have any complaints about the seat but do know there are more comfortable ones out there. Might even consider buying gel material and insert it myself. Going on a long ride this Sunday so that will be the test. ruclips.net/video/26iSDYKBRRo/видео.html
@@rich075 yeah ive watched that - may give it a try - not sure if it will mark the frame rails or not. Have thought about taking the seat to an upholsterer and see if they can do something with it. I think the stock seat is too wide. Plus it pushes me into the tank.
@@DaRuler66 have you considered a gel pad that goes on top? I have a friend with a MT-09 and he uses one. I was looking into purchasing something like this and installing myself www.amazon.com/Lisyline-Motorcycle-Absorption-Fatigue-Comfortable/dp/B07F43Y3R4/ref=sr_1_7?crid=1BFMSWX8PQ13F&dib=eyJ2IjoiMSJ9.vE5aE-e-NONcdk6LyPdaSI2qSv7Hx5Nt_nE4tFXjbHsQpUA1ZWth9pK-yXpXOLCi2fUwEtlawdLU4VD_b_fLvrh6JHm7BHvKXr0eZZGUc9wOlMjD1AZbNQdqrd9tiiXjU9vbchSHwcfNfvxu5N_pDHklVQ7ZayvDSAhBhDxK-7mNDOuaHxRx4O2D1ZVh-Tlv2A49vVabCL2-iXj_y-jfIoIZt_Rg_0FUq8WjVrMd30I0ZMkPpNRYxza3sVIjjWjZWw2AJ4_BFQ5GehQO4hssESaBwpKWQ-tRKj7oTAgJ8uc.0tYtAO5efx5BqiOGz1up8yNQXQCGd2b4_-YwcxhV_bo&dib_tag=se&keywords=motorcycle+seat+gel+pad&qid=1714805511&sprefix=motorcycle+seat+gel%2Caps%2C146&sr=8-7
The decals came off of my 2024 the second day I owned it. This year model looks better without the cheap looking stickers in my opinion.
@@wg1611 I agree. Took mine off on about the 5th day.
Bike looks awesome man! Super clean and tasteful mods. 👍
Appreciate it!
Ah so you removed the stickers to make it all-black ! Looks DOPE af with the side grips
Thanks.
I have them heal gaurds and R&G rad gaurd too. Pity ur bike gets bulb indicators, we get LED ones in the UK as Stock. Rear LED looks cool man 👍
Beautiful man! I had the red/black/moonlight dust 2019 Z900 they haven't changed much and I'm glad, sharp bike other than it didn't have the new tft display as now,anyway I just left a Ducati shop yea the Ducati monster is a killer bike but still I'd rather have that kawi Z9, that 948cc inline 4 is music man
Thank you!
Good looking bike mate. From Paul in the UK.
Thanks! Where at in the UK? I was stationed at Mildenhall in Suffolk.
I have the same bike. I’m going to replace the grey plastic parts of the fairings with black ones, I also wanted to remove the stickers and got a red new set, but I did not find the stickers for the wheels (similar to the original ones of course).
Yes I thought about replacing the grey parts as well. Considering vinyl wrapping them myself. Just cannot decide if I'll go with black or some other color.
@@rich075I too have the same bike. I haven’t removed the hi viz decals but really like the way it looks. Makes me regret the seats I bought with the hiviz stitching lol. I also replaced the gray parts, the headlight ones got black and the side ones are now carbon look. I like it much better than the gray.
all over rgb led is better !! very beautyful and makes u alot visible in the traffic!! nice bike u have a very good taste bro!
Can you add the links of the upgrades you made to your z900?
I did. Look beneath the video in the description section.
Very nice.. can you tell me what you used to remove the stickers?
Just a heat gun.
How hard was it to take off all the decals.. I'm looking at probably getting one. But like you not a real fan off the decals
It's not hard at all. Just apply heat from a heat gun or hair dryer for a few seconds and peel off slowly.
@@rich075 sweet.i figure so but I didn't know how cheap the the decals are so didn't know if they they tear all apart. Thank you
Just a question: how did you remove the original stickers from the bike?
I used a heat gun. Didn't put it extremely close to the fairing either. Heated area for about 10 to 15 seconds and it peeled right off.
@@rich075 Thank You
Bro will this be a better pick than street triple r
Never rode the Triumph so I won't be able to answer that.
Have you upgraded the seat ? my seat pushes on a sciatic nerve and really hurts after about 1 hour on the bike
I have not replaced it but I did flip the rear rubber pieces after seeing it done on another RUclips video. It is a noticeable difference. I don't have any complaints about the seat but do know there are more comfortable ones out there. Might even consider buying gel material and insert it myself. Going on a long ride this Sunday so that will be the test. ruclips.net/video/26iSDYKBRRo/видео.html
@@rich075 yeah ive watched that - may give it a try - not sure if it will mark the frame rails or not. Have thought about taking the seat to an upholsterer and see if they can do something with it. I think the stock seat is too wide. Plus it pushes me into the tank.
@@DaRuler66 have you considered a gel pad that goes on top? I have a friend with a MT-09 and he uses one. I was looking into purchasing something like this and installing myself www.amazon.com/Lisyline-Motorcycle-Absorption-Fatigue-Comfortable/dp/B07F43Y3R4/ref=sr_1_7?crid=1BFMSWX8PQ13F&dib=eyJ2IjoiMSJ9.vE5aE-e-NONcdk6LyPdaSI2qSv7Hx5Nt_nE4tFXjbHsQpUA1ZWth9pK-yXpXOLCi2fUwEtlawdLU4VD_b_fLvrh6JHm7BHvKXr0eZZGUc9wOlMjD1AZbNQdqrd9tiiXjU9vbchSHwcfNfvxu5N_pDHklVQ7ZayvDSAhBhDxK-7mNDOuaHxRx4O2D1ZVh-Tlv2A49vVabCL2-iXj_y-jfIoIZt_Rg_0FUq8WjVrMd30I0ZMkPpNRYxza3sVIjjWjZWw2AJ4_BFQ5GehQO4hssESaBwpKWQ-tRKj7oTAgJ8uc.0tYtAO5efx5BqiOGz1up8yNQXQCGd2b4_-YwcxhV_bo&dib_tag=se&keywords=motorcycle+seat+gel+pad&qid=1714805511&sprefix=motorcycle+seat+gel%2Caps%2C146&sr=8-7
I'll see what the upholsterer reckons
Might need to shave a bit off the side
What mirrors are these? Thanks
www.amazon.com/gp/product/B09531XVXZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Should of took all the metal parts and had them all power coated.
I'm fine with there being some accent.