How to Sharpen a Hand Saw | Ripsaws
HTML-код
- Опубликовано: 6 сен 2024
- 50% off plans during lockdown: www.woodbywrig... use code 9JVT31A
How to sharpen a hand saw was a question I had a hard time answering when I started. but it is an easy skill when you know the basics. in this video, we cover some of the basics of file selection and tooth geometry and how to sharpen a rip saw. in the next video we will go into a lot more or the details of sharpening a saw and focus on sharpening a crosscut saw.
Kennebec Saws - www.kennebecsa...
Difference between Ripsaw and crosscut saw - • The Difference Between...
It is an old video!
Files I use - www.leevalley.c...
File guide I use - www.leevalley.c...
Making a saw vice - • Saw Vice Build Part 1 ...
--Tools I Use--
www.woodbywrigh...
Shop apron I use - amzn.to/2xuzxTm
--Book I am Listening to in the video--
Spell or High Water (Magic 2.0 Book 2) (9 out of 10) - amzn.to/2FeLty1
Audible membership I use - amzn.to/2nPw0rs
Top Patreon Supporters:
Erich Keane - github.com/eri...
Chris Hertzog -
Kyle Prince -
Jeffrey Hall -
Travis Reese -
Nelson Smith -
////Help this channel grow\\\\
www.woodbywrig...
////You Can find me:\\\\
www.woodbywrig...
////Creators Colective Live\\\\
/ @creatorscollective6591
Music By. Tim Sway timsway.net/
Kennebec Saws - www.kennebecsaws.com/
Difference between Ripsaw and crosscut saw - ruclips.net/video/6RuhVhKlDcQ/видео.html
It is an old video!
Files I use - www.leevalley.com/us/wood/page.aspx?p=69854&cat=1,43072,43086&ap=1
File guide I use - www.leevalley.com/us/wood/page.aspx?p=70465&cat=1,43072,43086
Making a saw vice - ruclips.net/video/3HWeHRU-OWM/видео.html
Hi I love your videos it teaches me a lot thanks anyways.. I have a saw to it's a hand saw and I can only just use it one way to Sasa wood and the way I can use it it's just pulling it up I tried to push it down to saw her into the wood and I couldn't do that so I don't know what the problem is what do you think what the problem would be???? Tanks
Sx8
Sx8 l
Whilst looking through the piles of wood at my local second hand store a random stranger walked up to me and asked what I was going to use the wood for, we ended up having a whole conservation about planing, sharpening and he taught me to always sharpen towards the handle and I've worked like that ever since
Nice. There's a lot of people who really hold strongly to that. And there's just as many people who will hold just a strongly to going opposite direction. Once you find something that works for you that's the key.
@@WoodByWright I think it can be a matter of as you file the teeth you get better as you go or for some worse.
What a difference!
With an old 1950s panel saw, that probably hadn't been sharpened since that time, i decided to conduct an experiment.
Prior to sharpening, i took 10 strokes through a piece of hard maple (rip cut).
I didn't even make it through the end grain. The actual kerf into the long grain was 5/8" in length and each stroke was difficult.
After following James' video,
Same saw, same piece of maple:
10 strokes and my cut was 1-3/4", and the saw just sailed through it. That's nearly 3X's the progress as with the dull saw with the same number of strokes.
Thank you James!
Excellent video James 👍🏻
I have an excellent tip 😁 that I was given from one of the old guys at work - if you clean off any buildup or tree sap, or whatever might be on your type of blade - and then take a coloured marker (I like to use red) and run it across each tooth, so that when you are sharpening you can see the flat spots very easily, and how many passes you might need to make to remove all the red.
I was most impressed, amd it saves a lot of time and eye strain!
Keep up the good work I will continue to follow your great lessons!
that's a great tip (ha ha!)--thanks for sharing!
I just found a old hand saw and stanley 55 with tons of blades i need to set my saw and find a left side fence and a locking screw for the adjustable skate where the rod slides theough it attaches to that pin. Idk what its called. Oh i also just got into woodworking but so far ive found a nice collection while antique hunting here in Oklahoma. Everyone has things cheap as dirt here. Stanley 100 mitre picture frame was 59$. My vintage self powered "jigsaw" from sears roebucks and co was 12$. Saw was 8 ive seen over 30 kinds sizes shapes saws and all for less..
I've been looking for a clear tutorial like this for a while, this is awesome, thanks so much. Will check out your others.
A quick one. If you notice after sharpening a few saws that your files hold onto the filings.... Sharpening can cause a slight magnetism over time. Getting a good electronic demagnetizer will save your files and keep them sharper longer... Even if you card the files often, the fines can stay behind and over time they will not only knock down the tips of the files cutting surface, but they will also widen and round out the valleys.
I watched this video last year when you posted it. I have also had a pair of old, rusted, VERY dull, rip saws in desperate need of sharpening about that long. Today I finally got around to sharpening one of them. It was my very first attempt and took about an hour to do. On to of that, my bench choose is entirely too shallow to properly reach the heal and I don't have any of those nifty jigs so it was done freehand. After I finished, I took it for a test cut. First cut was across the thickness of a pine 1 by. 2nd was across the width of a pine 2x4...
Holy cow! The cuts were almost effortless! I couldn't be happier. No more using my general purpose saw for rip cuts.
Next I'm gonna change the other old saw into a cross cut saw. All freehand.
Nice. Glad I could help.
Gdcho
You can use a doorframe profile in the vice to hold the blade. It's less fiddling. But the jaws you made are awesome, might make a set too👍
I loved the video. Thanks for cutting out the need to stress over the high level of detail that may be important in more expensive saws. I’m not of a younger generation but the amount of detail still in this process made me want to just go buy another saw and not spend my limited time on this one thing.
Thanks again.
This is what I needed to know!
I just found a beautiful probably 100 year old Disston on the curb while riding my bike through the hood. Some don’t know what they throw!
I found that your video on saw sharpening very helpful as I am new wood worker with the Australian men shed in Mortdale and it will help me saw better. thank-you
thanks Russel. my pleasure!
I just want to say I very much enjoy your videos. I'm new to woodworking, and have been looking to move more towards hand tools. Your explanations are very clear and have helped me understand what I'll be getting into. Please keep up the great work.
Thanks. That means a lot. Let me know if there's anything I can help you with.
Agreed! I'm in the same boat. I recently raided my Grandad's old tool shed and picked out a couple of saws probably from the 60s or 70s. They're not in the best shape, but after a few of your videos I'm feeling confident in trying to restore them bac to their former glory!
Oh, this is an instant follow! I look forward to seeing more of your content😊
Great point at 13;45. On a dovetail saw this way of sharpening; 50 - 50 , really gives the saw all the set it needs. Try cutting dovetails in wood 3/4" or less with a saw with NO set - works great and the joint slides together more easily.
Makes for a very nice smooth cut!
Smooth cut is the upside. The downside is that you absolutely must have all the angles in hand before the saw moves - there's no going back!
La verdad mire el video para ver si en realidad sabias afilar un serrucho, yo no se absolutamente nada de ingles, pero si se afilar serruchos y la verdad te califico con un 10, afilado perfecto, no miré que lo trabaras pero igual a lo mejor ya lo habias trabado, soy fanático de las herramientas y bonito serrucho lastima que por aquí ya dejaron de venderlos de ese tamaño, saludos cordiales desde Culiacán, Sinaloa.
Gracias, eso significa mucho. Yo pude hablar más español para poder poner videos en ese idioma también.
@@WizardsNews Seria super bueno pero no te preocupes, con buena intención se entienden los idiomas, se traspasan fronteras y se hacen buenos amigos.
So James, after watching Paul Sellers, and now your video on sharpening saws, I figured might as well give it a go. I have an old Master Mechanic saw (Ace hardware brand I think) from about 40 years ago. First saw I ever bought and was severely disappointed in it so it's been hanging on a wall in the garage for years doing nothing. Thing never cut worth a darn. Now that I'm learning more about hand tools, figured it was time to try sharpening it. Never did that before on any saw. (I've always just bought the hardened tooth cheapies since then.)
Well, after sharpening it with a small inexpensive file from the local Woodcraft I looked at my handiwork with a magnifying glass and found I have anywhere from no rake to about 20 degrees of rake on various teeth. Guess I really need to learn how to keep that file in the proper position. Well figures me, that can't be good! Much to my surprise, the thing cuts very well, either crosscut or ripcut. I mean really, really good. Surprised the heck out of me. Now I've got to practice this so I can get this thing sharpened properly. If it cuts this good from my poorly done sharpening, it must be capable of some really great stuff when done properly. Now I understand why people like you and Paul Sellers tout the benefit of getting old saws and learning how to sharpen them. Time to hit the local estate sales, me thinks.
Thanks for the very informative video.
Thanks Don. that means more then you know. that is why I tell people not to be afraid of sharpening even with a poor job it will be sharper than when you started, and the more you do the better you get. from here on out you get to be blown away by how much better it is every time you sharpen it.
OK James, couldn't wait to try this again. So, this time I paid more attention to holding the file in the exact same position each time, and making sure all the teeth looked the same height when I was finished. Went back over a couple teeth afterwards when I noticed they were higher than the rest. Still not perfect I'm sure, but much better than the first time. It is amazing how well the saw cut, especially when you consider how many times over the years I almost just threw it out.
The first cut I made curved off to the right, I remembered you talking about that possibility, so I got out a diamond plate and gave it a couple swipes on that side. Still curved to the right so gave it a couple more swipes. Almost straight now, so I made a half dozen cuts to make sure it wasn't me. No matter what I did it still curved right a bit. Took a couple more swipes with the diamond plate and now it looks to be cutting perfectly straight. I am in awe. I think as you mentioned about the burr being all on one side, the next time I will try cutting the teeth from both sides. Either way, this thing really does work well now, and I've only spent maybe an hour total. I'm blown away by how easy it really is, and what a difference it makes.
This is the same AHA moment I had when I first found out how to sharpen and use a handplane properly. It truly is unreal what a difference it makes doing something well.
It's kind of embarrassing really. I'm a retired tool and die maker, so precision is not a stranger to me. Just it never translated to handsaws for wood. Go figure. This really opened up a new world of how to think of this stuff to me. I have been slowly getting into hand tools for woodworking instead of only machines lately, but sharpening my own handsaws was just something I didn't do. Wasted too much time not doing it. In honor of my new favorite saw, I polished and waxed it. :-) Thank you for making this so easy.
That is sweet! love to hear it!a lot of fun to be had in your future!
OK, this is all your fault. :-) Bought a saw yesterday from a local estate auction. $6. Finally got the bolts off and the plate is now soaking in a vinegar bath while the handle is drying out after stripping all the crap off it. I think I'll make this one into a crosscut saw. It looks to be about 8 teeth per inch. I need to find a source for new bolts. Actually had to drill one out it was so rusted. Luckily the plate is fine with only one gentle bend at the back. More to come, I'm sure.
Hearing you say to just go for it and that I probably wouldn't mess up a saw bad enough that it wouldn't cut, that gave me the confidence to go pick up one of my rusty dollar saws, get it cleaned up, clamped to the bench with a piece of wood, and then start filing. I filed the teeth in the wrong direction, but dammit, I was confident enough to go do it! On the bright side, I am temporarily the owner of a Western saw with Japanese sensibilities. I think of it as my woodaboo saw.
LOL nice. that is a new one!a whole new body mechanic!
@@WoodByWright Right? Felt pretty dumb when I saw it (no pun intended) but have decided I'll just make a template for the teeth (Paul Sellers has a great technique on his blog) and then sharpen the rest the correct way, then joint it down and learn how to recut the teeth entirely.
Wouldn't even think it was possible for me to do if you hadn't explained it so well, though!
Thanks this helped a lot. I just restored and sharpened some old saws for a friend.
Sweet. Love hearing about an old tool coming back to life.
Very good instructional video. Sharpening a saw is something every woodworker should know how to do. :)
And So relaxing!
Wood By Wright true. My workshop is in the basement so I need to time it right. Apparently the file makes horrible noises.. . Well.... so says my wife. :)
Collection of files, unless I was a woodworker I would get that but I'm occasional.
Just realized, the tape gives more contrast as you work. Good thing my wife assured me my eyesight has gotten worse now that I’m 60 … she of course is still 29 (with some years of experience) 😂
Tiny little correction: I think disposable saw teeth are usually impulse hardened, using an induction heater with a little pinch point in the field lines to supply a pre-determined amount of energy to each individual tooth and letting the thermal mass of the saw plate quench it.
Great video! The only thing people might be disappointed by is that I don't believe it would advance anyone's Stephen Covey-style self-help efforts.
I been saw sharpening for many years i even have an automatic filer i get some that need jointing, the teeth are uneven, including circuler saws. once thats done then i sharpen them and then set. Now since most hand saws are cheaper, i only do them in bulk 2 to 3 or more, otherwise it doesn't pay.
Very formative it gives me more sense to me to understand clearly how to sharpen a handsaw though I just recently found out that I actually have a kinda man skills, I love fixing any repairs needed to be done in the house, I found that my hidden talent is actually building small things made by scrap pieces which I made a cute little wagon for my bike, but buying handsaw's at a time whenever it gets dull isn't really practical ( money wise) which why would I use scrap pieces for to save some money, or oh yah what the heck like I always tell my kids it'll maybe can help to save our nature if everyone doesn't thrown things away, just maybe for curiosity, I wanna know if there's any of your videos for basic tools for the car as well, not to mention I myself a
So is the mechanic for my car, it works any how I can save up and which your video I just watched you just help me save Extra $ to keep buying handsaw, I've watch a lot of videos and the handsaw I just bought last two weeks ago front teeth are all worn out, too many videos I've watched too much talking made me fall asleep and so confusing instructions it drives me nuts and made me so irritated cause I've to buy another one.. thanks a lot :)
Thanks man. Sounds like a lot of fun. Keep it going!
Thank you! This will help me a lot, I just restored an old 30-40's saw that my parents found on the attic when they were doing some renovation and were to throw away.
Sweet. Love hearing about a good old tool coming back to life.
8i
Very thorough video. I like the sharpening plate trick. Thanks. Pilot, eh? I had to quit flying several years ago due to a completely benign heart arrhythmia vs. a rigid doctor performing a routine FAA medical. Oh well, it wasn't a huge issue as I didn't really like flying anymore than driving a car, but it was necessary for me to get from point A to point B in 1:30 hrs in the air vs. 6:00 hrs on the highway. Stay out of the trees.
Oh no fun. not looking forward to the day my wings get clipped.
I read the book "Keeping the Cutting edge Setting and Sharpening hand & power saws. By Harold Payson. Nice short 📚. He highly recommend white distilled vinegar to remove dirt. With my favorite trick a ball of tin foil and the thick green scruby works 💪 👍
LOL.... Bought an antique vice like you showed and never knew what was for. Now I know!
I have a few old saws that are heirloom tools I’d like to use but am afraid to ruin. They aren’t particularly valuable; just tools that have been passed down and were cared for that I don’t want to be the one ruin. I haven’t sharpened them yet. I’ve been too nervous. I’ve watched a lot of saw sharpening videos. I don’t know if this vid is the one that puts me over the top towards finally doing it, but I feel more confident having watched this.
thanks John. that means a lot. don't worry about messing it up. no matter what you do it will be sharper when it is done. and if you really want to practice you can go and pick up a cheap $5 one at the antique shop.
Agreed, there are plenty of saws out there for $5 or less in garage and estate sales.
Полезное видео и полезные приспособления, которые можно сделать своими руками. 👍 спасибо.
Thanks for this video, i am from Lumajang City, East Java, Indonesia.
Brother, you have an awesome knowledge. You should write it down and make a small How to little booklet and sell it. From A to Z. I'll be your first customer. Keep on preaching!
E-x7 interesting idea. I might have to think about it.
I was wondering what those saw file things were in my garage for the longest, yay now I can use them! My husband makes fun of me for using a handsaw but I think he's a barbarian for using a reciprocating saw for every single solitary think he wants to cut 🙄 I like clean cuts sometimes, okay! At least I'm not going to make sideways ass tables and cabinets
I have a saw that always wants to go left, I never knew the trick with the diamond plate, I'm going to try that. Thank You.
Sweet. Have fun with it.
I have grandpa's saws , thanks for the video ,I won't screw them up now
Good use of the tape, use it to cover small magnets or a magnetic strip to collect shavings.
Thank you for this wonderful video.I have bunch of questions for you 😀
1)Do we have to joint the saw before every sharpening?
2)I watched Chris Gochner’s video about saw sharpening and he jointed and sharpened a saw twice.What’s the reason of that?
Thanks
I usually do joint all the teeth as the ones in the middle get more wear, but some people do it every other time. some people get really picky about sharpening and will do it once and call it shaping the teeth then a second time and call it sharpening. some will also go onto finer grit files as well. for me I find the benefit of it so slim that it is not worth the time.
Learn more of it.thanks . It's wonderfulll the way you explain and easy for me to copy.gracias .from Mexico city.
شكرا لك تحياتي من 🇩🇿
I hope you explain clearly how to keep track of fleam settings on the Lee Valley file guide when flipping sides of the saw on cross cut saws. When I flip the saw end for end to file the other side I always have trouble thinking through how the fleam angle setting on the file guide should be set. I seem to be geometry challenged with the guide;, a rule of thumb to memorize would help.
I will be hitting on that in the next one. It actually becomes simpler the less you think about it. I have the same problem.
I have never ever thought about sharpening my saws but new they needed it you have just got my attention on that again and I will give it a shot. Thank you so much for your videos!
thanks! my pleasure! have fun with it!
Have you ever sharpened a Felling or Bucking saw?
If so.. do you have a video of it?
If not.. Who or where can I see how it's done? And are the same types of files used as for the hand-saws?
Here you go. ruclips.net/video/P_fil-XUF-E/видео.html
I don't even have a hand saw... great video
i knew nothing about how to sharped a saw, apart from a chainsaw.. A very well explained video. loved it. mike
Great video, but I honestly couldn't work out whether you are filing down the leading edge of the tooth or the back of it to eliminate the flat spot
both. you push straight down
I like to keep the saw finish smooth and slippery. I use car wax or furniture wax. Is there something better for saws that are not used often? Like a silicone oil.
I just use my home made paste wax.
Thank you very much for this awesome tutorial. I learnt a lot watching your video very diligently.
Wow, you really know your stuff, and explain it well thank you. Bout time someone spoke English
Awesome video might just give this a try! Those are woodworkers shoes!
Keeping good care of my saws is a problem. They rust, they get build up on the sides. They have a ruff life in the weather. What should you coat the saws with when they deal with rain and snow?
if they are out in the weather then there is not that much you can do other then to keep them constantly waxed and dry as possible. usually I use paste wax to keep mine lubricated for cutting and that alone protects them, but if they are out in the weather that is a whole nuther ball of wax!
Got me with the opening line haha
So much more to saws than I thought
I like teachers and they do a great job of imparting knowledge to others.good job brother, love from india
I’m wondering what do you think is the most versatile saw type to buy for a first timer? I have a carpenter big box style hand saw but I’m looking to get something more useful to woodworking. What would you recommend as a good saw to look for or invest in to start?
Oh. Didn't see this here too.
Ya I wasn’t sure which channels you checked and replied to
Excellent lesson, didn't have any idea how to start sharpening a hand saw, now I do. THANKS.
Thanks. Glad I can help. Let me know if you have any other questions.
Took me about 2 minutes to figure out I'm just going to buy myself a replacement saw LOL
That's a lot of money. It's hard to find a decent rip saw for under $150.
"The wood Sawyer knows his onions!"Great woodshop too.
Wish I could give two thumbs up on this video. Great explanation of cross cut and rip saw geometry.
Thanks man. I am looking forward to today's video with a bit more detail.
Great video thanks James. What I would love to see in the crosscut video is an evaluation of whether it is better to get a vintage sawset, or if there are modern manufacturers you could reccommend. I think the veritas set looks great and I was interested in whether you'd suggest getting their saw set's?
thanks Ray! I will be talking about saw sets soon.
Very good explanation. Thank you very much Ray.
Sharp video ! Pun intended as well as another good video i was a Carpenter/ Woodworker my whole life when i was. In my 20s and 30s I. Gave away a lot of my old hand saws because of downsizing and going thru life issues I could kick myself now. But i try not to cry over spilled milk ? Although i. Do have. A large amount of appreciation. For old tools like quality hand saws , planes. And chisels among others ive found every one of your videos not only entertaining but educational as well i am between shops at the moment but i do hope to set my next one up similar t what you have set up. In the videos in order to do a lot of handwork as now i have my very first Grandchild to build girlie things for that could possibly be treasured for many years
Thanks Craig. sounds like a fun time ahead of you.
For storage, what kind of fluid would you use to keep the saw in a ready condition when the saw is going to sit in storage for months?
I would actually use a coat of paste wax.
Have you made a video showing how to sharpen a tree pruning saw blade?
Generally those are not sharpenable. They have hardened to teeth so the blades are intended to be disposable.
@@WoodByWright Thank you for the response. New blade it is then.
many thanks for this video!! When i encounter a tooth with a big flat what i ahve exactly to do? I often press the file against the big tooh trying to save the smaller tooth...am i wrong?
Yes. That is the correct way to do it. Just make sure you're pushing the big tooth the correct direction. You want to keep it centered between the tooth in front and in back of it. So sometimes you have to take material off the front of the tooth and sometimes you have to take material off of the back of the tooth
Hi forgive ignorance please can you let me know how to tell between a rip saw and a cross cut saw.
Geoff
Here you go.ruclips.net/video/6RuhVhKlDcQ/видео.htmlsi=jgChDDTitli9ZtyW
Thank you for nice professional explanation.
You are good teacher
Hi, I can't find a rip saw where I am but cross cut saws seem to be plentiful. Anyone have any words of wisdom as to the difficulty in converting cross cut to rip? I~ve never sharpened a saw but am pretty fearless and usually things go ok. I have Weyersberg Corneta saws available for instance.
As long as the teeth are not hardened like the ones you'll find at the stores it doesn't take much at all to change it into a rip saw. Just turning the file to the correct angle and sharpening it there. The first time you sharpen it it will just take a little bit longer cuz you're changing the geometry of the tooth.
Fabulous and very easy to follow..... time for me to have a go and loose my knuckles lol
Good luck. Let me know if you have any questions.
Thanks for the lesson. You're such a great teacher!
thanks! that means a lot!
Thorough explanation. Thank you; I’ve got a lot of work to do now…
And speaking of rake, I’ve got to search if you have any such thorough videos on determining rake and splay in chair legs…
P.S. I like that your shop looks like you actually work in it.😁
Very informative. Very good presentation and detail. Thank you for your knowledge.
Great video, clear and easy to understand. Thank you. I do have one question regarding gents saws and dovetail saws. how do you set them? as I can only find a Saw tooth setter that goes up to 15tpi and some of these saws can have many more teeth per inch than that.
you can file down the hammer on a set to do those small teeth. that is one of the reasons I do not have anything finer than 16 PPI I just do not have a use for it. and I have not noticed much difference in cut quality.
Wood By Wright thank you. These sort of videos are great. I am an experienced carpenter but I have been drawn more and more to older tools that you don't throw away and these tools are invaluable.
I like your video. I want to ask you. How will I sharpen the saw ( the brand is Stanley saw) ? I try to sharpen it several times but the file just slids away it doesn't sharpen the saw. Please help me to sharpen this Stanley saw because I bought it with big money. Thank you God bless
I'm assuming you bought it new. In that case, it's a hardened teeth and you cannot sharpen it. They are intended to be disposable. Feel free to send me an email with pictures and I can verify that.
Are you a professional pilot? I fly a cessna 175 and work in the avionics industry.
No just private pilot.
Dude, your videos are awesome. Thanks so much!
Also, nice clogs.
Hi James ,Can you use a Dremel to sharpen hand saws. (Australia)
Not really well. He would want to bounce around on you and you would have a hard time finding one with the right shape. A file would be much faster than trying to hold a Dremel steady.
This was a great video to watch. Ty. I have a couple of old saws that belonged to my Pop, and I've been thinking about cleaning them up and having them sharpened. I think it would mean more to me (and Pop) if I did the work myself.
Sweet man. That is what I like to hear.
Superb idea
What's the difference between rip saw and cross cut saw and what is the angles of both saws.sir can you reply
ruclips.net/video/6RuhVhKlDcQ/видео.html here's a whole video on that. With rip saws the file goes across at 90° to the plate. With cross cut it can go anywhere from 15 to 30°. It's just a personal choice of how aggressive and or clean you want the cut.
A great tip is to use some good lighting, I almost cried when I accidentally did the wrong tooth! 😥
I live in Japan and every saw I buy is a pull saw. (Boy did I think they were dull as butter knives when I first used em).
So quick question. Would these techniques work equally as well just with the plate flipped around (front to back to address teeth direction)?
Yup they work the same you just need different files they are more acute then the 60 degree file.
Wood By Wright hmm acute files in the land of cuteness heheh. Cheers!
Hi. I have a new sharp hand saw. The problem is, it will always going sideways to the left. Like a mirrored 'C' cut. You know why?
Sounds like the set is off on the teeth. You can stone the teeth. I have a video on that. If you search for how to stone a saw it should pop up. I would send a link but I am out right now sorry.
how often do you find that you need to sharpen your saws? I have a couple of Veritas saws that I've had for a couple of years. I'm afraid to use these as my first sharpening experiment. guess I need to find a flea market.
Most are every 6 months or so. That is a great use for an old saw.
It's like you knew I was going back through saw sharpening vids recently...
In another vid I remember you saying that it's really not worth it to try to restore backsaws. Maybe expand on that and let us know what's different about sharpening your modern backsaw vs sharpening old panel saws?
thnaks. I don't remember saying that. they are a lot harder to find decent back saws that are worth restoring. I have only come across one out in the wild before.
I remember you saying that also but do not remember the vid, it struck me as odd you saying it so I remember that
thank you James. when i see dull cutters i really miss the shop ( tool grinder ) i had access to on the sub - tender i was on in the 70s lol how ever it would not of done the hand saws you show . if its not one thing its another
Lol yup. Love the right tool for the job!
the best video on saw sharpening I have seen so far.
excellent lesson
It is very helpful I shall try it sooner thanks
mr.wright, I would suggest that you have your Saw clamp under patent application excellent look and height adjust.impressive
Thanks Jesse
I have a veritas dovetail saw and tenon saw. The dovetail is rip cut, the tenon saw is crosscut. The dovetail has cut both pine and oak like a hot knife through butter in both crosscut and rip, but the tenon saw is a nightmare. It's hard to start and regularly catches and stops during a cut and it wanders. Granted it was a manufacturing second I bought during Lee valley's black Friday sale. Any tips?
sounds like there are a tooth or two out of place in the plate making it catch.
Excellent video! Looking forward to watching the next one about sharpening a cross-cut saw. Cheers!
thanks man. it should be out Saturday, but I might not have that one edited tell Monday.
Saws, one of the few times you can blame the tool...great video James, thanks for sharing it.
ok come on I blame all my tools. that does not make me right but I do it!
I think we all do at times...
Great tutorial. Thanks
If the teeth are not flat then I discovered that it feels like it does not have teeth. When I refiled one recently to change the TPI I had to joint the saw right after I had all the teeth there because they did not end up level.
Great video idk y but almost all of your videos are related to what I need help with LOL I just put the last coat of finish on my first saw i built its a dovetail saw and i have the teeth sharp and set but its not cutting fast enough but I didn't put any rake on the teeth I think that's Probaly the problem.
thanks Holly. that would do it. the more rake you put on the faster it will cut.
Good job, thanks.
Great video!!! Thanks!
Ha. I literally sharpened a saw yesterday. I wish I had waited a day to see this first. I think the file I'm using might not be the correct size. I'm ending up with teeth of different sizes in some places though maybe I've screwed it up enough that I might need a complete do-over?
that is the great thing about sharpening a saw. even if you mess it up it will be sharper then when you started. as long as the teeth are all the same hight then you are fine. but if some are higher then others those should be filed down.
Indeed! It's sharper for sure. I did end up with some varying sizes in the teeth by the time I was finished. I wonder if the file wasn't the right size from the beginning and now my teeth are out of whack. I probably miscounted the teeth per inch. I'm pretty sure I counted the points per inch instead. Didn't even thing about it till you mentioned it in your video.
Nice tutorial...but even nicer shoes!😏
Did you build the saw vise? Do you have a video on the vise build?
Yes I built that a couple years ago. I have a video on it as well if you want to see that.