The Ultimate GameCube Controller
HTML-код
- Опубликовано: 16 апр 2024
- This is the greatest Ultimate GameCube Controller of all time.
*ALL THE LINKS ARE DOWN BELOW*
NaxGCC Documentation: gcc.naxdy.org
NaxGCC Matrix Chat (better than Discord): matrix.to/#/#naxgcc:naxdy.org
NaxGCC Firmware Source: git.naxdy.org/NaxdyOrg/NaxGCC-FW
NaxGCC Hardware Source: git.naxdy.org/NaxdyOrg/NaxGCC-HW
NaxGCC Input Benchmark "OG Controller" Mode: • NaxGCC Input Benchmark...
NaxGCC Input Benchmark "Input Consistency" Mode: • NaxGCC Input Benchmark...
(the above experiments have been replicated multiple times)
Music used (in order):
- • Smileton Theme "Carrot...
- • FFXIV OST The Qitana R...
- • Highway
- • [Electro Swing] Odd Ch...
- • [Electro Blues] Odd Ch... 
Игры
Errata:
- Yes, technically this is about USB HID, not just "USB'. However, in the interest of keeping things as concise as possible, I decided to omit this distinction.
- Though the controller claims it is sending its reports every 8333us, at the end of the day it is still up to the console to decide when to interpret them. This is dependent on the OS, afaik the Switch runs a modified version of FreeBSD (which is MIT), -so we cannot know for sure what is happening behind the curtain.- NiceMitch from HHL actually measured when the packets are getting accepted by the Switch, and it appears to be alternating between 8ms and 9ms delta times, leading to the better accuracy we're observing, and what we desire.
- Compared to Phob + lossless adapter, NaxGCC has _very slightly_ improved input accuracy due to the improved scan rate of the buttons (
ProCon bros... It's over...
We can put this on our proGccs
The creator of ProGCC has released an experimental firmware with an input consistency algorithm similar to what I did here following my video!
@@xNaxdy just downloaded it. Thank you so much!
This is super cool! Your projects have helped me a ton, appreciate all the hard work!
Amazing! Thanks for putting this wonderful work out into the world!
very good video sir naxdy
also very good pic of jr at 2:55, approved!
This is amazing. I definitely need to try this one.
Subbed, I wanna see what happens with this controller! Great work
Very good video. Explanations were easy to follow and the editing was really entertaining. I wonder if it's possible to use the USB 3.0 and further to not be dependant on poll rates, the same way it's the case for USB 2.0.
Anyway, really excited for the future of NaxGCC
Very cool + subscribed
you are amazing naxdy
good shit
matrix + nix + your own git service
you know your shit 👍
Bro just dropped one of the most informative and interesting GCC videos on RUclips and its only got 275 views... thats criminal! Great job, definitely want to stay up to date on this project.
I have a question, if I wanted to do a B0xx style controller with a raspi as many of the options there are on the market to play Ultimate, how different is the polling of the raspi compared to this new project of yours and what do I need to do to optimize the polling from the switch to the raspi(beside connecting it through USB).
Great project and hope more good things in the future. :)
Personally have a lot of gripes w/ the Gamecube controller, but appreciate its exceptional rumble. It's weird, I never see people mention that.
I didn’t understand a word but still, good luck with the project
So is the input consistency kind of what slippi’s poll drift fix or the input integrity adapter are also doing? (Pay a small latency price for vastly improved input consistency) If I understand correctly the difference is that those are at the game/adapter level and this is essentially at the controller level, bypassing the need for an adapter in the first place
Not sure what exactly the lossless is doing since it's closed source. Slippi is also a bit of a special case since there we actually have control over the entire input pipeline as opposed to just the client (controller or adapter) side. But overall yes, the effect is similar. Though note that you're only paying the price of latency compared to the "regular" mode of the controller, consistency mode is still better in terms of latency than GCC + regular adapter.
How difficult do you think it would be to have a controller that could be used via GameCube cable or USB-C? It'd be nice to have one baller controller for both my GameCube and Switch!
cool
can you connect your gcc to the PC as well with this?
yes!
Could there be a Usb C to Gamecube wire? so it can still be used on gamecubes?
For regular Gamecube, the Phob is still the better choice imo, because it has some additional Melee-specific features. There you also don't need this input consistency fix, since that's a quirk unique to the Nintendo Switch.
So it sounds like the easiest way to get this up and running is get a Phob 2.0 and flash the firmware?
AYO DAS ME
@@0wn3dforlife IT'S REALLY HIM
This is cool as hell but I'm honestly *_way_* more interested in this "embassy" library you got goin on...
Link to source is in the description, it's pretty neat
pero como jugamos duplas con 4 de esos controles usb
is this any better than phob + input integrity?
In terms of input accuracy, _very slightly_ yes, since the NaxGCC scans the buttons much faster (
Based
With that many self-hosted services you have, I would be surprised if you don't mirror this video in your own PeerTube
I was planning on adding PeerTube and Mastodon someday actually
@@xNaxdy Let me know to follow it on my own server!
The way that most of these problems would be solved if the entire controller's circuit was analogue and the console just had a port for it with a dedicated chip to convert it to digital in the correct format with a single step
But its no longer a GC controller now is it?
🤓
yep, technically it's a "GameCube-style" controller now