Good day to all of you, here is the link where you can contact the manufacturer/seller of the kit: facebook.com/marketplace/profile/100005896925732/?ref=permalink
bro, dropping a link or contact details would help everyone out especially the "poor bois". I have seen their posts for sale in a few Honda Civic groups Philippines on Facebook. Good product I only wish they made them in hard ABS plastic because metal wont take long before it starts to rust esp. where the bumper lifter is mounted. ✌
Sir what model po yung Bosch drill nyo? May link ka? Pwede ba sya gawin as impact wrench? Thanks po. Very helpful vid nyo since I just purchased the kit for my Civic ESi. Thanks
BOSCH GDX sir yung pag kakatanda ko. Hindi ko lang sure kung anong number, pero impact wrench with 1/4 hex adapter. Bumili lang ako sir nung drill chuck na 1/4 hex yung end para ma convert sa drill.
Good am sir. Off topic lang po. Ano kaya problem ng RPM ko bumababa ng 1000 (with aircon) normal temp na po yon. Tapos pag sobrang init ng panahon at hataw ka, once na mag menor ka as in bagsak talaga. Umaabot ng below 500 na parang mamamatay na siya. Chineck ko yung plug sa IACV, di naman maluwag. Ano kayang pwedeng solusyon don? Thank you sir.
@@glorybelcrisostomo3159 Marami kasi pwede pag mulan yan sir. Mostly sa sensors yan sir. Ang involved sa idle sir ay ECT, AITS, MAP, CKF and CKP. Pwede din naman na nasa distributor yung problem sir or sa wire. Pero based diyan pag mainit siya sir diba. So one of two sensors yung pwedeng may problem. AITS or ECT. Baka hindi na accurate reading. Next thing naman sir is baka madumi yung throttle body and intake manifold. Try mo linisin sir or kung linis na pwede ding pcv valve baka barado sir.
Good day to all of you, here is the link where you can contact the manufacturer/seller of the kit:
facebook.com/marketplace/profile/100005896925732/?ref=permalink
Matagal ko nah toh binabalak nasa shoppee pero wala kasing video. Salamat sir
boss. san mo nilagay ung isang bracket ung hindi finofold?
Boss pwede b s ibng unit yn bumper lifter mo
Can u show me the custome rear bracket?
Can i buy rear brecket. I want it.
bro, dropping a link or contact details would help everyone out especially the "poor bois".
I have seen their posts for sale in a few Honda Civic groups Philippines on Facebook.
Good product I only wish they made them in hard ABS plastic because metal wont take long before it starts to rust esp. where the bumper lifter is mounted.
✌
They use stainless steel for the lifters also the nuts and bolts that came with the kit are stainless.
Thanks bro
How did you connect bumper to fenders?
I connected it using the stock mounting point plus there are bolts near the stock mounting. I used it to mount the lifter kit extension.
San mo nbli bumper lifter idol and hm
FB sir poor boiz name nila. COD 1600php.
Is it hard to install? Does it come with instructions? Getting a kit soon
Sorry, I replied a different response from another video. For me its is not that hard to install. Justt need the right tools and a place to work on.
Sir what model po yung Bosch drill nyo? May link ka? Pwede ba sya gawin as impact wrench? Thanks po. Very helpful vid nyo since I just purchased the kit for my Civic ESi. Thanks
BOSCH GDX sir yung pag kakatanda ko. Hindi ko lang sure kung anong number, pero impact wrench with 1/4 hex adapter. Bumili lang ako sir nung drill chuck na 1/4 hex yung end para ma convert sa drill.
@@jgutierrez4472 Thanks sa info sir, mga nasa magkano price rsnge nya sir? Planning to buy sana
@@jms2861 nasa around 7-9k yung drill lang sir. Bukod pa yung battery at charger.
Sa battery sir nasa 5k naman. Sa charger around 1-2k naman sir.
Boss ayos din ba pag iniscrew
Paanong screw sir di masyadong malinaw para sakin. Pwede bang paki elaborate ng kaunti sir, salamat!
how can i order them? price ?, quantity discount? shipping to USA
Unfortunately they're only sold locally here in the Philippines as of now. They cost 1600 Philippine Peso approx. around 30-35usd.
You can use johnny air cargo. Just contact the manufacturer directly facebook.com/markd.diaz.58
How much does this kit costs ?
Around 30 usd with only local shipping in the Philippines.
wow! pinoy!
Do u sell any of tis?
No sir, unfortunately they are made if only ordered.
@@jgutierrez4472 how can i order them? price ?, quantity discount? shipping to USA
Good am sir. Off topic lang po.
Ano kaya problem ng RPM ko bumababa ng 1000 (with aircon) normal temp na po yon. Tapos pag sobrang init ng panahon at hataw ka, once na mag menor ka as in bagsak talaga. Umaabot ng below 500 na parang mamamatay na siya. Chineck ko yung plug sa IACV, di naman maluwag. Ano kayang pwedeng solusyon don? Thank you sir.
Na pa check na a/c system sir?
Baka nag high pressure a/c system mo sir. Hindi ba siya gaanong kalamig?
@@jgutierrez4472 malamig naman sir. Pag no ac ganon din po rpm ko e
@@glorybelcrisostomo3159 Hindi siya sir nag CEL?
@@glorybelcrisostomo3159 Marami kasi pwede pag mulan yan sir. Mostly sa sensors yan sir. Ang involved sa idle sir ay ECT, AITS, MAP, CKF and CKP. Pwede din naman na nasa distributor yung problem sir or sa wire. Pero based diyan pag mainit siya sir diba. So one of two sensors yung pwedeng may problem. AITS or ECT. Baka hindi na accurate reading. Next thing naman sir is baka madumi yung throttle body and intake manifold. Try mo linisin sir or kung linis na pwede ding pcv valve baka barado sir.
sir san location muh?pwde mgpainstall nyan hm service
Meron sir nag kakabit nito. Paki contact na lang sa FB, poor boiz pangalan nila sir.
san shop pwd magpaayos ng bumper?
Contact niyo na lang po yung poor boiz sa fb sir. DIY lang po yung sa akin. Pero nag home service po sila.
@@jgutierrez4472 hm kaya pagawa dun?
San mo po nabili yan paps
Bumper lifter
Facebook sir. Look for PoorBoiz sir
napa bili ako agad. sobrang bumaba bumper ko kasi may mga bata na naglaro sa hood ko tinapaktapakan bumper ko sira
san nakakabili?