Never heard of that term bitting? I always called it wrinkling to much paint as you said but dry time & weather temp plays big part of this as well to avoid wrinkling.
it was a little chilly here today, and i applied paint on a little to thick,thats what i get for not taking my time....thanks for help..useful video as usual....take care
tony your videos are very good- to the point! I see some of the guys talk, talk, talk, and talk and then get off the topic. I like your videos--- you get right to the point.
Great video bro, I’m a beginner at this, and I’m going to hell and back trying to fix my door... as soon as I get everything smooth, in the corner I have a huge bite section🙄🙄🙄 but I’m following your video to fix it so I’ll be tuning in a lot moore lol
Some of the repairs are different paint which is reacting with the lacquer so after sanding and filling I will try to flash a number of very light undercoats leaving plenty of time to dry between coats. Hopefully a protective layer will build up and prevent the wrinkling when I apply the top coats. I have etch primer but will save that for the bare metal repairs.
this just happened to me today at the shop and didn't know what it was. the unfortunate part is that i ended up noticing after putting on the clear. So glad I searched through your videos for this though.
Good advice. I will try it tomorrow. That "dusting" sounds like a good trick. Having the cracks spread when I respray was exactly the problem I'm having.
Thank you thank you. This was great info. I kept having this issue. Didn't even know what was happening but u confirmed my suspicion and gave me the solution.
Hi i love your vids great stuff. Question Im sorta new to painting and im only wanting to paint 1K paint due to Iso's in the 2K paint and i cant afford a air fed system. question is 1- is the Iso issue as big as people make out it is. Question 2- How do i go about sealing the car is there 1K epoxy sealers. any help would be great. Im finding on this new project with my cousins 1970's Triumph Stag someone has 2K epoxy sealed it and when im bogging it and go through to steel im useing a 1K primer and sometime its biteing......looking at your vid im laying it down to wet?
Okay, I'm freaking out but you said don't, so I'll keep watching. Needed to remove some tape lines on a two color tank. Wet sanded the clear coat (one can) after it sat for 6 days, then cleaned the tank off, dried it, and started on my second can of of clear coat. In one spot, It started to wrinkle, a little, on one section. So, instead of freaking out, I'm gonna finish the clear coat, if it dries completely, I'm thinking I'll just say f#@$ it, and not spend a lot of time looking at that spot... So, time to do last coat....
Hey Man! Become a VIP at learnautobodyandpaint.com we have A-Z trainings and videos on auto body and paint and for your questions join my streaming pretty much mostly every Tuesday 8 PM EST here on my youtube channel. Don't forget to subscribe and click the bell so you can ge notifications
Hey Man! Check out LABAP VIP Program and Learn How To Auto Body & Paint Like a Pro and Download Your FREE 85 Page Auto Body and Paint Manual at vip.learnautobodyandpaint.com/home
exact same garbage with the dupli-color acrylic paint and acrylic clear coat. just wrinkle wrinkle, horrble 2 day drying times and getting denty from the sun, like orange peel.
Keep getting it in the same spot already sanded it like 20 times and keep getting it when priming it I’m a vip member witch video can help me with this problem
Same thing. Im doing set of aluminum rear lovers for mustang. Sanding done and primed. I have 3 or 4 spots keep doing same thing. Sand all down do it again this will be 3rd time lol.
heh if you ever join VIP.... I'll show you... Everytime you activated original basecoat you will get a decent amount still activated under the clear. sand and featheredge a lot more than wrinkled area you can see. today the easiest is to use UV primer and the problem is quickly solved.
Hey tony. I priming paint and there is a biting a chimical reaction. Do i need to sand and prime it again.. I need your opinion. Thank have a good day..
Biting? Are you making up new terminology? Heard of wrinkling and heard of lifting and heard of maping but, biting...no such thing my friend. Been painting for over 30 years and have had every paint problem personally happen to me but, no biting. Please stop saying "biting" or we or going to have to make a drinking game out of this video and every time you say "biting" we have to drink. Thanks tho for your video's. Happy to see someone new in the business and learning this trade.
Biting, wrinkling, lifting ... same look. We’ve always called biting in Hawaii. I too have been painting since I was 15... 37 now. Not so new buddy. 🤙🏼
So why did you not strip the gas tank down to bare metal in the first place? It's only a motorcycle gas tank not a whole car! You have 2k primer & base/clear coat. Why be so lazy & then run into problems with old paint chemical reactions?
Kronaphasia who tf takes the extra time to strip paint completely off if it’s still adhearing.OEM finishes are the strongest.hes keeping the the stronger stuff on by not taking it off.
![Lethal Company Music Video 🎵 "Follow The Orders" [VERSION A]](http://i.ytimg.com/vi/QeooZB4Z7RA/mqdefault.jpg)
Never heard of that term bitting? I always called it wrinkling to much paint as you said but dry time & weather temp plays big part of this as well to avoid wrinkling.
it was a little chilly here today, and i applied paint on a little to thick,thats what i get for not taking my time....thanks for help..useful video as usual....take care
Great video. Your technique description worked fine without actual vid segment and saved me a heap of extra time and grief. Thankyou.
+Dave Wood glad you liked it!
tony your videos are very good- to the point! I see some of the guys talk, talk, talk, and talk and then get off the topic. I like your videos--- you get right to the point.
Great video bro, I’m a beginner at this, and I’m going to hell and back trying to fix my door... as soon as I get everything smooth, in the corner I have a huge bite section🙄🙄🙄 but I’m following your video to fix it so I’ll be tuning in a lot moore lol
Awesome Fred! download my free manual and learn more! learnautobodyandpaint.com/free-autobody-manual
BOSS PAINTER - Learn Auto Body And Paint! Ok cool
Some of the repairs are different paint which is reacting with the lacquer so after sanding and filling I will try to flash a number of very light undercoats leaving plenty of time to dry between coats. Hopefully a protective layer will build up and prevent the wrinkling when I apply the top coats. I have etch primer but will save that for the bare metal repairs.
Thanks David!
this just happened to me today at the shop and didn't know what it was. the unfortunate part is that i ended up noticing after putting on the clear. So glad I searched through your videos for this though.
Thanks, Bro! Hope my videos helped you! Good luck!
Hey, have you grabbed my free manual yet? www.learnautobodyandpaint.com/free-autobody-manual/
Awesome man! lol
BOSS PAINTER - Learn Auto Body And Paint! Haha yes! I got the manual last year, brother. Thanks!
Good advice. I will try it tomorrow. That "dusting" sounds like a good trick. Having the cracks spread when I respray was exactly the problem I'm having.
Did it work?
I have this problem glad I'm watching this. thanks.
Great!!
Happened to me with Eastwood spray poly. I think i add to much acetone to thin it.
Thank you thank you. This was great info. I kept having this issue. Didn't even know what was happening but u confirmed my suspicion and gave me the solution.
You are welcome! Glad you checked out the video!
That looked like Bumble Bee's face from Transformers for a sec with blue eyes LOL.
Hi i love your vids great stuff. Question Im sorta new to painting and im only wanting to paint 1K paint due to Iso's in the 2K paint and i cant afford a air fed system. question is 1- is the Iso issue as big as people make out it is. Question 2- How do i go about sealing the car is there 1K epoxy sealers. any help would be great. Im finding on this new project with my cousins 1970's Triumph Stag someone has 2K epoxy sealed it and when im bogging it and go through to steel im useing a 1K primer and sometime its biteing......looking at your vid im laying it down to wet?
Perfect.just had the issueband this videobis perfect thanks!
Wow you do some good work!
If a solvent pop-up occurs on my paint work pls what do I do? I mean how do I fix it
What about if it happeneds with the clear
Prob didn’t let it flash long enough or put the second coat on while other one was wet still.
wat would hapen if i mix single stage paint and clear 50/50 mix
Okay, I'm freaking out but you said don't, so I'll keep watching. Needed to remove some tape lines on a two color tank. Wet sanded the clear coat (one can) after it sat for 6 days, then cleaned the tank off, dried it, and started on my second can of of clear coat. In one spot, It started to wrinkle, a little, on one section. So, instead of freaking out, I'm gonna finish the clear coat, if it dries completely, I'm thinking I'll just say f#@$ it, and not spend a lot of time looking at that spot... So, time to do last coat....
What causes blistering or bubbles after one year of a paid job Paint was perfect a year later getting bubbles now
Hey Man! Become a VIP at learnautobodyandpaint.com we have A-Z trainings and videos on auto body and paint and for your questions join my streaming pretty much mostly every Tuesday 8 PM EST here on my youtube channel. Don't forget to subscribe and click the bell so you can ge notifications
got to be member of the "VIP"
Hey Man! Check out LABAP VIP Program and Learn How To Auto Body & Paint Like a Pro and Download Your FREE 85 Page Auto Body and Paint Manual at vip.learnautobodyandpaint.com/home
Great video , the tank looks real glossy . Can you tell me if I can spray clear coat over acrylic enamel paint ?
Yes you can
Yes you can, just sand it with 1500 or so before you clear it
exact same garbage with the dupli-color acrylic paint and acrylic clear coat. just wrinkle wrinkle, horrble 2 day drying times and getting denty from the sun, like orange peel.
Keep getting it in the same spot already sanded it like 20 times and keep getting it when priming it I’m a vip member witch video can help me with this problem
Same thing. Im doing set of aluminum rear lovers for mustang. Sanding done and primed. I have 3 or 4 spots keep doing same thing. Sand all down do it again this will be 3rd time lol.
heh if you ever join VIP.... I'll show you...
Everytime you activated original basecoat you will get a decent amount still activated under the clear. sand and featheredge a lot more than wrinkled area you can see. today the easiest is to use UV primer and the problem is quickly solved.
What is it called how you have painted that with black mark I wanna do grey and black
Go ahead and try it! :)
I sprayed DTM the under side of my hood somw parts where I sprayed wrinkled up
😮 Check out VIP and see how it can help you get pro finishes on your car project: www.learnautobodyandpaint.com/vip-offer/
Yeah . You forgot to record,but we can see how to fix it on you're VIP course. Wink wink 😉
This also happens if you use non 2k reducer.
Looks like the stradmans brother
I think you put a coat off bar coat down
Hey tony. I priming paint and there is a biting a chimical reaction. Do i need to sand and prime it again.. I need your opinion. Thank have a good day..
Jomar, I talk about that in VIP! www.learnautobodyandpaint.com/vip-offer/.
Not to mention rubbing it with bare hands send oils down into work while its open. Never go gloveless past primer
Biting? Are you making up new terminology? Heard of wrinkling and heard of lifting and heard of maping but, biting...no such thing my friend. Been painting for over 30 years and have had every paint problem personally happen to me but, no biting. Please stop saying "biting" or we or going to have to make a drinking game out of this video and every time you say "biting" we have to drink. Thanks tho for your video's. Happy to see someone new in the business and learning this trade.
Biting, wrinkling, lifting ... same look. We’ve always called biting in Hawaii. I too have been painting since I was 15... 37 now. Not so new buddy. 🤙🏼
So why did you not strip the gas tank down to bare metal in the first place? It's only a motorcycle gas tank not a whole car! You have 2k primer & base/clear coat. Why be so lazy & then run into problems with old paint chemical reactions?
Kronaphasia who tf takes the extra time to strip paint completely off if it’s still adhearing.OEM finishes are the strongest.hes keeping the the stronger stuff on by not taking it off.
Why wont this load for me, seems some new videos wont....
really? weird, just mine or others too?
Other "new" ones as well
Will not load on LABAP.COM blog either....
Finally watched it on my phone, forgot about that thing!!LOL Great video!!
Ronald Flores so what was it your computer? Thanks Ronnie!
Always take your car to be painted at Earl Scheib or Miracle! never do anything yourselves, you suck,believe me.
I like your style brother you get right to the point and really show how to do fix or do things. You just got another sunscriber