This video was the perfect Xmas gift. I have a pair of these in my clipper bag. One day I took the blade off to clean them. Could never get the motor and the blade to sit right. They been sitting in my bag for at least 4years... Lol.. This video solved that problem and now they are working just like the day I bought them. Thank you so much Happy Holidays and God bless 🙏🏽❤️❤️
Bro I feel you. I did not know about that tension School adjustment without taking off the blade it used to have me so ticked off that I have to keep taking off the blade the real just
All praises to your parents for teaching you how to enunciate the English language. I try to learn from other videos, they mean well but their vocabulary is extremely limited. I don’t think you said um, or you know what I’m saying one time. Adrin, all the best to you.
Any info on how to make the run quieter? They're very loud. I've adjusted the power screw on the side but they're too loud. Is loud noise a common issue with this trimmer? Had em for 6 months now I thought the quality would be better.
Wow! Those were my HITTERS!!! I dropped them last year some time and they never cut the same. Brought a new blade and everything...still nothing. Long story short, that small tension screw on the blade was the problem. NEVER KNEW THAT!!! 😯🤷🏾♂️
L. Melvin Mannn who you tellin even on the Toutliners if you get the tention just right and dnt drop em thatll definitely throw the tention off a lil. Every time I tell sombody about the tention lever, they be amazed. I made clippers hit that didnt even move all because the Tension.
Dawg I feel the same way they use to cut soooo good my barber used to ask me to use it for my cut since he was the one that set my blade lol . I dropped them and it messed it all up and never been the same. I need a new blade still got em though
When you put your blades on push them to the right and hold them there the top blade should be towards the left corner tighten it turn them on turn the power screw on the side until it clicks soon as it click turn it back a little right before the clicking noise blades are set if it doesn’t catches the hair and they are zero gapped tighten the tension and repeat same stepps over with putting blades on and power screw damnnn
Why when i turn that screw, by the time the loud noise stops, my blade is sticking half way off the left side? I then try to take the blade off and see if i can get it any furhter to the right but its not possible because then the holes on the blade for the screws dont match the holes on the trimmer and cant screw the blade back on.
This is the best video tutorial on youtube about Andis II... this guy is straight to the point everyone else talks in circles....
💯💯💯
This video was the perfect Xmas gift. I have a pair of these in my clipper bag. One day I took the blade off to clean them. Could never get the motor and the blade to sit right. They been sitting in my bag for at least 4years... Lol.. This video solved that problem and now they are working just like the day I bought them. Thank you so much Happy Holidays and God bless 🙏🏽❤️❤️
Wish they still made these.. they were my favorite for over 20 years
Best tutorial I've seen on this yet. I went through the steps exactly how he said, now they're cutting great.
Very helpful video with these that I had for years and couldn't use them. Using them now. They hittin
Adrin I like them better than the t outliners. I started with the outliners came across these like 3yrs now they have been my go to. Dope video homie
thank you so much for that, i didnt know you could adjust the tension screw with the allen bit. been cutting for 10 yrs and i never knew that.
Bro I feel you. I did not know about that tension School adjustment without taking off the blade it used to have me so ticked off that I have to keep taking off the blade the real just
Readjust
I didnt even know that you could adjust the blade from the screw. Subbed! Trying this out tomorrow morning.
Best Styleliner tutorial!
Thank you for the video!
Best tutorial yet. Thanks bro. I subscribed
Just fixed my blades off your video. Appreciate that 🔥🤙
I having using the styliner 2 for about 35 years.
The company will mail them to you for free; particularly Wahl. Good information!!! My favorite trimmer.
All praises to your parents for teaching you how to enunciate the English language. I try to learn from other videos, they mean well but their vocabulary is extremely limited. I don’t think you said um, or you know what I’m saying one time. Adrin, all the best to you.
How you get new blades to these? New Subscriber 💪🏾
Great content, thanks man! I like these a lot. My only minor complaint in that their teeth are fairly shallow. Short short hair, they're amazing!
I have a question my trimmers are not moving back and forth and I lost my screws do you know where I could find some replacement screws please
With all this info does it make the shape up sharper?
CAN THE ANDIS GTX BLADE BE SET AND USED FOR THESE OUTLINERS.. the GTX blade is wonderful.. ????
Any info on how to make the run quieter? They're very loud. I've adjusted the power screw on the side but they're too loud. Is loud noise a common issue with this trimmer? Had em for 6 months now I thought the quality would be better.
Did u get the blade sharpen or is it factory ?
Awesome show 👏..
Wow! Those were my HITTERS!!! I dropped them last year some time and they never cut the same. Brought a new blade and everything...still nothing. Long story short, that small tension screw on the blade was the problem. NEVER KNEW THAT!!! 😯🤷🏾♂️
L. Melvin Mannn who you tellin even on the Toutliners if you get the tention just right and dnt drop em thatll definitely throw the tention off a lil. Every time I tell sombody about the tention lever, they be amazed. I made clippers hit that didnt even move all because the Tension.
Dawg I feel the same way they use to cut soooo good my barber used to ask me to use it for my cut since he was the one that set my blade lol . I dropped them and it messed it all up and never been the same. I need a new blade still got em though
Se le puede adaptar una cuchilla de styliner 2 a una t out liner
Just what I needed to know!!
what size is the Allen Wrench?
Thanks alot man you got me right!!!
where you get that wrench from?
Where can I get the anivo blade setter you used for they liners
what size allen key wrench is that i need the exact size becasue i want to purchase this allen wrench size
thanks
jon-
I use a Torx bit T5 !!!
@@ThatManDWill oh ok
Good video very detailed
All these years bro and I didn't realize I can adjust the tension of screw without taking off the blade
Same here
Sometimes when I turn them on, there is some clicking like one thing grinds against the other or something.
I need help my blade keep gettin loose
Dope vid
My teeth dont move..an its brand new!!
the blade on mine move up and down no matter what ive tried
carlos vargas Had that issue as well. Just brought a new blade. 👌🏾
tihi357 give up barbering, and take cosmetology instead.Because you sound like a bitch
When you put your blades on push them to the right and hold them there the top blade should be towards the left corner tighten it turn them on turn the power screw on the side until it clicks soon as it click turn it back a little right before the clicking noise blades are set if it doesn’t catches the hair and they are zero gapped tighten the tension and repeat same stepps over with putting blades on and power screw damnnn
When you have the blade off, you have to make sure those two little screws on the inside are screwed tight.
Computer store if those still even exist or hobby store that carries chinese-made screws (even and odd diameters) that's what they are
That's not a power adjustment it's actually to set the blades left to right ...😂😂😂
Its also for power boss 💪🏾
The adjustment on the side is the blade set middle ... not necessarily "power"
Why when i turn that screw, by the time the loud noise stops, my blade is sticking half way off the left side? I then try to take the blade off and see if i can get it any furhter to the right but its not possible because then the holes on the blade for the screws dont match the holes on the trimmer and cant screw the blade back on.
Trak gracias
🐻🔽
These are the worst trimmers I ever had. Very upset
Keep in tune they'll work great