Whirlpool | Maytag washer transmission removal
HTML-код
- Опубликовано: 7 окт 2024
- Buy the transmission here (affiliate link)
a.co/d/0YIkMC4
Thanks for watching! Email me if you have any questions at appliancerepairshorts@gmail.com
If this video helped you, you can support me by buying me a coffee. Thanks!
Ko-fi.com/appliancerepairshorts
How do you know if the transmission is failing? What happens is that I changed the actuator and the capacitor on my washing machine and it continues to fail, it thunders like a plane taking off and stops and gets stuck in spin mode.
Yes that is a bad transmission. Nothing will fix that problem until you replace the transmission. The seal got damaged and water entered the bearings. The noise is basically the grease removed. The resistance is too high, so it gets stuck. Sucks, but you might have to replacement job on your hand
@@appliancerepairshorts Thanks for the tip. I'll do it later and let you know how it goes.
@@pabloarredondo2329Post a video of your machine spinning so I can hear it, please make a video
@@coolrobuxgaming What happens is that I already removed the transmission to see if a new one would solve the problem.
@@pabloarredondo2329 Just say the model number and put new one in
Is this orientation right side up or its side?
I can answer that, but I can tell you that the motor should be on the left , shifter on the right and the capacitor towards the back. Pump capacitor and shifter are next to each other
It's supposed to be full of oil 😂
It does, but the gears and spacers wear out. I have a video of one fully disassembled