Zachary - Just finished wiring seats F350 2017 using your 2016 example. Got the shop manual and only two wires were different, So thank you since step by step I followed your example and every thing works. Quick question on the passenger seat- where the power goes to the switch on the side of the seat - do I need all the wires that go into the big plug? Can I cut them off to cleanup under the seat. BTW - never wired any auto wiring before and it was very simple following your TUBE.
Hi Zachary, great video! I live down under, and looking at putting s550 seats into my 66 mustang. I'm struggling to find a local place that sells a switch with both heating and cooling, just wondering where you picked up the switches in the video?
Zachary, great work on these harnesses. I, like others here am working on a project and need a set of these to retrofit the mustang seats into an older vehicle. How can I begin the process to exchange my seat harnesses to one of your modified sets?
What’s up bro, i have the 2016 seats and looking to swap them in a new edge. Are you still taking orders on the harness splicing? And what’s your turnover rate right now to get them in and back
At 7:30 you point to the yellow/blue being power? I have some seats out of a 2017 ford escape. The wire that looks like power is (yellow/red) pin 16 and ground black/grey pin 21
Hey, I noticed you skipped over most of the heating cooling portion of the wiring. Any chance you could help me out? The peltier device has 4 wires going to it, are you using all 4 or just the 2 larger ones that go to the outside 2 wires on the device? And your relays are just reversing the polarity right? Thanks man!
If I buy just the seats, do I just need to send you the wire harness under the seats? I’m having an issue with being able to get the other harness’s. I’m looking for the heated and cooled.
..maybe you can advise,..I have the fan c/w heating element module. Just would like to wire to heat. I have a blue, yellow, and to greens going to the integral heat element. Can you help with what wires I need to connect?
Found this out the hard way with damn memory seats. Couldn’t get the seats out trying to power the plug with a battery. Only the passenger seat worked. When I power probed the drivers seat only the lumbar would move smh
Badass work, happy New Years dog
Have a good new years bud
Happy new year’s man
Good work and informative.
A thinking man, & problem solver!!
Love IT!! 👍😁👍
Great video
Very helpful - good work - Thanks so much--worked great! 2015 mustang seats Mike
Mad props bro!
Zachary - Just finished wiring seats F350 2017 using your 2016 example. Got the shop manual and only two wires were different, So thank you since step by step I followed your example and every thing works. Quick question on the passenger seat- where the power goes to the switch on the side of the seat - do I need all the wires that go into the big plug? Can I cut them off to cleanup under the seat. BTW - never wired any auto wiring before and it was very simple following your TUBE.
Hi Zachary, great video! I live down under, and looking at putting s550 seats into my 66 mustang. I'm struggling to find a local place that sells a switch with both heating and cooling, just wondering where you picked up the switches in the video?
Zachary, great work on these harnesses. I, like others here am working on a project and need a set of these to retrofit the mustang seats into an older vehicle. How can I begin the process to exchange my seat harnesses to one of your modified sets?
I recognize that green tag on that harness on the bottom of the seat in the video.. hopefully I get them soon
How do you get in contact with him?
I actually just scored a set of these for free out of a roush, this is incredibly helpful, planning to retrofit them to my 92 thunderbird soon
Love the video. QQ: why did you have to remove the memory module?
I’m interested in a s550 seat harness, I’ll be installing in an 89 foxbody.
What’s up bro, i have the 2016 seats and looking to swap them in a new edge. Are you still taking orders on the harness splicing? And what’s your turnover rate right now to get them in and back
Is the temperature sensor failsafe built into the TED device; by bypassing the heat/cool module you basically cancel out the failsafe too
Hi Zachary is your heating and cooling variable or one hot temp and one cool temp ?
been trying to find a wiring diagram for the ford TED’s. want to integrate them into my escalade seats.
At 7:30 you point to the yellow/blue being power? I have some seats out of a 2017 ford escape. The wire that looks like power is (yellow/red) pin 16 and ground black/grey pin 21
Hey, I noticed you skipped over most of the heating cooling portion of the wiring. Any chance you could help me out? The peltier device has 4 wires going to it, are you using all 4 or just the 2 larger ones that go to the outside 2 wires on the device?
And your relays are just reversing the polarity right?
Thanks man!
So they don't need canbus to work the heat and cooling like others say online. Can run with a power and ground like normal ?
If I buy just the seats, do I just need to send you the wire harness under the seats? I’m having an issue with being able to get the other harness’s. I’m looking for the heated and cooled.
..maybe you can advise,..I have the fan c/w heating element module. Just would like to wire to heat.
I have a blue, yellow, and to greens going to the integral heat element.
Can you help with what wires I need to connect?
Are you still doing these harnesses for 2015 seats?
How do I know if the mustang seats I bought have memory on them. As of now, I would guess that they don’t
I have everything working except the heating and cooled seats. Im not sure how to wire up relay or which wires go where
At 20:45 the module not plugged into wiring harness but has a tube with fluid attached to it. What is its purpose? Air bag?
How do i connect with you? I saw towards the end its $500. Thats cool and worth it, but i need your info.
Where are you getting your heated and cooled switches from?
Zachary, are you still reworking these harnesses? If so, what is your contact information? Do you have a web site?
Do you sell detailed wire schematics for 08 steering column?
Found this out the hard way with damn memory seats. Couldn’t get the seats out trying to power the plug with a battery. Only the passenger seat worked. When I power probed the drivers seat only the lumbar would move smh
Zachary - How can I purchase these wiring harnesses for a seat swap?
Do yo still sell 2020 mustang gt seat harnesses for heated and cooled seats
How much would it cost to have you do this for me? I have an F100 as well that I want to use mustang seats in.
Is it the same process on 2018 mustang seats?
You sell the plug in play harness?
Can you do this for 2008 mustang gt
hey man anywhere i can contact you to buy a harness fitting these seats in a 66 mustang.
Do you still have these for sale?
Do you offer to make these harness and sell them ?
How much would you charge to build me a harness for the same seats.
👍
The only go I trust to do electrical work is my boy Zach
How do i contact him to rewire my seats?
What's your address I'd like to get mine done for my 1970 cougar I have the 2016 mustang seat thanks david
Wish I could afford your woork
Yooo Zach u moved out of florida?
No I still have my place in Miami. Hopefully shoot back down south here soon.
@@zacharymcfarlin1270
Gotta keep ditching out on people you screw over
@@Joe_Brown99 lmao
@@Joe_Brown99 careful, he might send you to the back of the line!
@@zacharymcfarlin1270 how do I contact you to have my harness converted?