DC3 Remote Start Walkthrough (NI5 Nissan 2013 Murano)

Поделиться
HTML-код
  • Опубликовано: 3 окт 2024
  • Mike walks us through the installation of a DC3 remote start, security, and keyless entry system onto a 2013 Nissan Murano.
    • RS1B-DC3 (CM-DC3)
    • NI5 T-Harness
    • FT-ALARMIT KIT with the all-new DAS-II
    • RF-2WT10-SS 2-way LCD remote kit
    • DR-5400 DroneMobile LTE module for smartphone control
    Want Compustar in your vehicle? Find a dealer today!
    www.compustar....

Комментарии • 16

  • @nicmo6913
    @nicmo6913 10 месяцев назад

    Thanks this help me alot wasnt doing the second part of the prograninng.

  • @ubcnme1
    @ubcnme1 3 года назад +1

    Hello on the DC3 moduel with the das 2 shock, glass, tilt, and movement the settings on the DAS 2 is set at default and you'll just have to set play with the Dial on the DC3 to your desired preference.

  • @Pelinas
    @Pelinas Год назад +1

    So, are you be able to use remote start with just car fob ??

  • @DRSKINGDAVID
    @DRSKINGDAVID 10 месяцев назад

    I need a t harness for a 2014 dodge durango sxt.. using the same module which one would i get?

  • @thematrix7225
    @thematrix7225 Год назад +1

    Is this compatible with 2019+ Mazda3? And if so, which t-harness?

  • @sonnytsai5088
    @sonnytsai5088 2 года назад

    Love it’s teach

  • @mauriciocorrea3566
    @mauriciocorrea3566 2 года назад

    Hello, can you tell me if the idatalink flashbacks cover the SEAT vehicle brand, regards

  • @luis-iy9qr
    @luis-iy9qr 2 года назад

    hey how do you reset the module if your only using the 20pin connector? the instructions say to hold down the button and plug in the 8pin connector and 20pin connector but i'm only using the 20pin connector ..any help would be appreciated ..thanks

  • @andrejoseph239aj
    @andrejoseph239aj Год назад

    I have a SENSOR 2 - 4 PIN GREEN how to install it to what wire ?

  • @Jonathan-cn6xz
    @Jonathan-cn6xz 2 года назад +1

    How do you find the driver door pin without taking out the upper dash dials to access the BCM?

    • @leodlion5187
      @leodlion5187 Год назад

      Im in the same boat, is a pain in the a$$ to get to that hardwired connection. Any luck idea?

    • @Jonathan-cn6xz
      @Jonathan-cn6xz Год назад +1

      @@leodlion5187 I ended up going with a different brand that required absolutely zero wiring but was plug and play into the BCM. Obviously, the down side was I had to take the dash dials out to get to BCM but it wasn't too hard.

    • @leodlion5187
      @leodlion5187 Год назад

      @@Jonathan-cn6xz i was taking that video as a reference because i have a 2012 nissan altima. I hardwired 2 wires to the bcm the one to the horn switch everything was plugged ready to play and it didn't work, i ended up reflashing the module put everything back and now the car wont shift from park either the controls/ knobs for the AC wont work. Im screwed. I need help

    • @Jonathan-cn6xz
      @Jonathan-cn6xz Год назад

      @@leodlion5187 wow sorry, I'm not sure what to tell you. I can't think of anything if the car can't drive anywhere like bestbuy or some car audio shop.

    • @leodlion5187
      @leodlion5187 Год назад

      @Jonathan I know right. I will try again today, i was thinking maybe it has to do something with the immobilizer