Thanks so much for making this clear and very easy to watch video!! All the older ones on RUclips are sloppy and kind of annoying. Definitely bookmarking yours ❤
Great info!! Thanks for the help! In a single Program (A, B, or C), all start times must use the same run times, so if you want different run times for a certain time of day, that is when a different program would be helpful. (For example, after reseeding, I water briefly at 8:00am and noon, but at 4:00pm, I would like slightly longer run times because it won’t run again until the following morning. I need Program A for the first two cycles, and Program B for the third, longer, cycle).
When having 2 zones on one program with the same start time they both don’t start at the same time only zone 1? Does it start after zone one finishes ?
@@BarbKlimczyk move dial to “Manual” pick zone and time then move dial back to “Run” and it will run that zone There is a way to run one cycle of all zones manually also if thats what you’re looking for.
@@nicolaepopescu3835 the 3 hour interval is between each cycle (6am start- all zone runs 1 at a time, 9am- all zones run again 1 at a time) not in between each zone.
Thanks so much for making this clear and very easy to watch video!! All the older ones on RUclips are sloppy and kind of annoying. Definitely bookmarking yours ❤
Great info!! Thanks for the help! In a single Program (A, B, or C), all start times must use the same run times, so if you want different run times for a certain time of day, that is when a different program would be helpful. (For example, after reseeding, I water briefly at 8:00am and noon, but at 4:00pm, I would like slightly longer run times because it won’t run again until the following morning. I need Program A for the first two cycles, and Program B for the third, longer, cycle).
@@richardstones6445 that makes sense! My schedule isn’t that complicated so I never thought of that need. Thanks for the info
Just installed irrigation - this video is a lifesaver! Thanks man!
Awesome
When having 2 zones on one program with the same start time they both don’t start at the same time only zone 1? Does it start after zone one finishes ?
@@jakearcurioshorts correct only 1 zone runs at a time. Each zone in the program will run one after another.
@ thanks! Should I have them set at the same start time? Will both of them still run ?
I would just like to run each station for different times manually when I want (no schedule) is that possible.
@@BarbKlimczyk move dial to “Manual” pick zone and time then move dial back to “Run” and it will run that zone
There is a way to run one cycle of all zones manually also if thats what you’re looking for.
Why do all the zones turn on one after the other, although I programmed them at 3-hour intervals between zones?
@@nicolaepopescu3835 the 3 hour interval is between each cycle (6am start- all zone runs 1 at a time, 9am- all zones run again 1 at a time) not in between each zone.
I programmed zone 1 at 00.15, zone 2 at 3.15 and zone 3 at 6.15. But at 00.15 zone 1 starts, then zone 2 and zone 3 one after the other.