{1055B} Finding Input Short Circuit in SMPS

[@jetroompoc3736]

Thank you For the videos Sir God bless you.. Don't get tired of teaching us

[@HaseebElectronics]

best regards

[@amirrajkomar33]

That's amazing and absolutely informative, great analysis and explanation made it so simple to me as i thought it's so complex , that's what we need , waiting for more in Shaa Allah, جزاك الله خيرا لنشر العلم ،وبارك الله فيك

[@HaseebElectronics]

best regards and special thanks

[@W1RMD]

I always appreciate you and your great videos! Thanks and have a great weekend.

[@HaseebElectronics]

it is my pleasure
Have a nice weekend

[@Edmorbus]

Thank you for this beautiful explanation

[@HaseebElectronics]

You are very welcome

[@muhammadishtiaq24]

Weldon keep sharing

[@davefenzel5305]

It would be nice to hear from the designers of the SMPSs. How were they developed. It all starts with a design, then it goes thru the testing phase, etc. I worked with design engineers when they were developing modems. It was exciting.

[@mohammedriyaz2127]

Sir very clear explanation sir thank you wating for further knowledgeable thearys

[@stalinilangovanstalinilang5663]

Very good explain.

[@HaseebElectronics]

best regards

[@machiElectronics]

Nice video thanks sir g

[@HaseebElectronics]

thanks a lot

[@radiotvrepair1059]

thank you hasseb how can we know the component in short circuit in case several components beep with the multimer.

[@olgunguldur2570]

Hello
I have many ATX power supplies. Most of them have two 200V/470uf input filter capacitors. One or both of these capacitors have bulging upper parts. When I measure capacity with a multimeter, I read normal or slightly low values.
I want to ask, how can I be sure that these capacitors are healthy without using a multimeter?

[@beinghuman9544]

Thank u sir makig explanation video
Sir please exline about parlel two diodes and capacitor function in this circuit.Why these components used thank u

[@santoshwadatkar]

Very good sir 🙏

[@HaseebElectronics]

best regards

[@LISANCACOM]

excellent.

[@HaseebElectronics]

thanks a lot

[@susantaatha6468]

Very nice

[@HaseebElectronics]

best regards

[@sifirbir01]

emeklerin için teşekkürler

[@abnhainn7944]

Hi,Herr Haseeb ,I have AC ADAPITER/ BLOC DÁLIMENTATION Mod HAC-002(EUR)
INPUT 100-240VAC
OUTPUT 5.0 vdc 1.5A 7.5W
15.0 vdc 2.6A 39.0W
zero output why?
Danke

[@quanghoang04]

👍👍

[@shamssham828]

Sir I have a board used c3998 transistor l replaced damaged transistors but the base resistor also needs to change l don't know the value of the resistor can you help me with the resistor value please
I checked the good resistor value 6.8 ohms is it ok

[@mtrltoolman]

Thanks

[@HaseebElectronics]

welcome dear

[@RetweakSatapathy-e6e]

Input is open circuit in multimeter around 200kOhm, but when I plug in, the mcb of house trips. What could be the issue sir?

[@NickNameNemo]

👍🏻

[@aungzawoo9926]

❤❤❤❤

[@aliemlek]

👏👏👌👌

[@aboabdrahmanaziz8752]

شكرا تعرف كيف تشرح

[@ubaid_raza26]

Very nice 👍

[@nazakathussain4871]

❤❤