My car 2012 madza3 i Sport sedan 4D,. my key dont have remote to open and close doors. Can i do programming to any after market remote and use for open and close doors.
Did you change out with new batteries? It could be the FOB. Next time you should have Mazda take a look or ask the assistant. Make sure they don't charge you tho.
Question. My keyless entry remote has a small key ring attachment with the keybutton and outline of a key with button. What is this used for? Please let me know. Ty Its a 2013 Mazda 6 sport
Hello. Please help. My mazda cx9 2008 has a keyless. 2 cards that work once and fail. Then I have to put the metal key in the ignition. Then the engine always starts. If you manage to start the engine without the key, the "key" light flashes red on the board. Smart key opens and closes the car. The only problem is sometimes I turn the ignition switch and the second time I do not and I have to take the key, the tip. The buttons on the door handle also do not work. Sometimes I press the button multiple times and manage to open the door. I have the impression that the cards are not always seen by the keyless module. What could be the problem? Forscan shows an error. Code: B1600 - PATS ignition key transponder signal is not received. - Possible causes - - Defective ignition key - PATS antenna or cables damaged - Damage to the PCM Module: Opening the door locks with a remote control (no keys required)
Sorry to hear that but that sounds very complex. Have you talked to the dealer? I would suggest searching on RUclips for similar problems because your model dates back to 2008.
I have done this at least ten times and it doesn't work Yep that is me I done everything right but one , I didn't check the battery on keypod to see if it was good since I had put a new one in it a while back I didn't think it would have gone bad but it did I change it and have it working, thanks
will this work for a fob that is programmed to a different mazda key, in other words can the fob be re-programmed for the new car key from my old mazda 3 vehicle?
Thank you grtz from Southwest spain
You're welcome. Thanks for watching
thanks Jay you're the man!! works perfect!
Glad it helped!
Thank you you’ve been a good help thumbs up by stars Brother
Glad it helped
Just did this and it worked.
Thank you.
Glad it helped. Please help me reach 100k by subscribing.
So awesome how simple things can be that most will spend tons of money to fix. Thanks a bunch. It felt like you were doing a video game cheat code.
My car 2012 madza3 i Sport sedan 4D,.
my key dont have remote to open and close doors.
Can i do programming to any after market remote and use for open and close doors.
I imagine it would be universally compatible. You will have to buy the correct model.
I have a 2010 Mazda 6 and I have tried this so many times with no luck. Any idea on what could be the problem?
Did you change out with new batteries? It could be the FOB. Next time you should have Mazda take a look or ask the assistant. Make sure they don't charge you tho.
Same it’s not working for my 2010 Mazda6
@@luisrivs7533 same not working on my 2009 mazda 6. New batteries installed.
@robncltnc did u find a solution?
Yeaaaa thanks bro you saved me 150 I wish I could give you the 150 somehow lol
Just subscribe to share my channel. I will be very thankful.
It won’t even program for me idk why I have 2012 push start
My Mazda is push start button and not ignition key so I can’t turn 3 times off and on, any suggestions?
In that case you will need to search on RUclips for a newer model video
I have been but I have yet to find one, I finally just gave up, thanks for the reply and appreciate your help.
Question. My keyless entry remote has a small key ring attachment with the keybutton and outline of a key with button. What is this used for? Please let me know. Ty Its a 2013 Mazda 6 sport
Prob a tool to open the key fob or reset it?
Does this work on models that are 2015 and newer? Specifically asking for a 2015 Mazda6
It should
Hello. Please help. My mazda cx9 2008 has a keyless. 2 cards that work once and fail. Then I have to put the metal key in the ignition. Then the engine always starts. If you manage to start the engine without the key, the "key" light flashes red on the board. Smart key opens and closes the car. The only problem is sometimes I turn the ignition switch and the second time I do not and I have to take the key, the tip. The buttons on the door handle also do not work. Sometimes I press the button multiple times and manage to open the door. I have the impression that the cards are not always seen by the keyless module. What could be the problem? Forscan shows an error. Code: B1600 - PATS ignition key transponder signal is not received.
- Possible causes -
- Defective ignition key
- PATS antenna or cables damaged
- Damage to the PCM
Module: Opening the door locks with a remote control (no keys required)
Sorry to hear that but that sounds very complex. Have you talked to the dealer? I would suggest searching on RUclips for similar problems because your model dates back to 2008.
It worked!’ Except my trunk doesn’t open with the key fob anymore
That is weird. Are you sure you held it down for a few seconds?
@@Jay_Rule yes … multiple times even up to 30 seconds
I have done this at least ten times and it doesn't work
Yep that is me I done everything right but one , I didn't check the battery on keypod to see if it was good since I had put a new one in it a while back I didn't think it would have gone bad but it did I change it and have it working, thanks
Your battery prob dying and is it compatible with the car?
Jay Rule Yes it was compatible make model and key the key stop working but my other works
How do it do it with a push to start
I don't understand your question
will this work for a fob that is programmed to a different mazda key, in other words can the fob be re-programmed for the new car key from my old mazda 3 vehicle?
I believe they each have their own unique code...
I have followed these instructions dozens of times and the car (2005 Mazda 3) never goes into programming mode. Any ideas?
David Arabian did you ever find a solution?
@@kennediesheree1844 I haven't. If I do , I will update!
David Arabian how about now ?
@@Vongaming12 still nothing. Are you having the same issue?
David Arabian yup and I have a 2011 Mazda 3,might be a bad fob not sure.
Hey do you know how to program a mazda 3 2015 key? They give me a key that I need to program but it cost 100 bucks just to program it what a scam!
Did this not work? I'm sure if you search in RUclips, somebody has probably made a video.
can i do this on a 2010 mazda 5 GT?
I think so
It seems working for now I'll give you update of this
Sivakrishna T so?
and?
doesn’t work for 2016
That was the new redesigned model so they most likely changed the circuitry
hey man gimme another shout out
Next time during a food review
ok thanks man keep up the good vids bro
no doubt, you know nobody works harder on YT lol
You forgot you have to walk around the car backwards 3 times to reset the nfc😅
How many people fall for this bs
lol
😂😂😂😂😂😂😂😂
How is this keyless?
press it to open the door so it's keyless
moooooorrrrrooonnnnn
I tried this a million times it’s not working
What year is your Mazda? Is the battery good?