Oh my gosh! I watched 5 other videos to program my new fob to my 97 Tahoe and not a damn one said anything about the paperclip in the program panel. I was getting so frustrated that I couldn't do it... So I gave up for a couple months figuring I had to take it to a shop to have it done, then I got bored and searched for more videos and BAM! This man saved the day, the paperclip thing worked and it programmed immediately! Thank you!
Worked like a charm on my 2003 Park Avenue. I’m ecstatic I didn’t have to go to the dealer, probably to be charged $100, to do this at home in 2-3 minutes. Thank you for the video!
I followed the exact direction that Rick Mammana gave, and used on My 2003 Buick Park Avenue, using a used key fob, and it worked perfect. All for $10, the Buick garage wanted $140.00 for the fob and to program it. Thanks Rick
Does not work with a 2003 Buick Park Avenue. You can connect the pins all you want but no programming mode, which is consistent with all the other documentation over the internet. Had to try it before spending more money.
This was perfect, I was worried that during the rush hours of the holiday, I would have to drop my car off at the shop. But, nope thanks to this very helpful video I was able to reconnect my car keypads to my car. Awesome video, thanks!!!
Thanks. I have a 1999 Buick Park Avenue ultra supercharged 3.8 Engine. My Key Fob Transmitter when out around 1 ago. The Buick (GM) no longer carry them for my Vehicle. I called Auto Zone and it's $ 90.00. I checked on Ebay it's $ 22. 00. WOW. I will purchase it and will do exactly as you have demonstrated.
Excellant, worked perfect! Went to a locksmith to get extra key made, he was stumped about programming a new remote. Your instruction were clear & simple. Nice job, Thanks
Nice video Rick - technique works perfectly for a 1998 Park Avenue as well. The most common reason these key fobs fail is the battery clip solder joints on the circuit board become loose or disconnected. To fix this problem simply take a soldering iron and some rosin-core solder, and carefully touch up the 3 solder joints on the battery clip. No re-programming is necessary. With that done the vast majority of key fobs will work fine again.
Recently purchased a Silverado '98 without remote, was planing to install aftermarket alarm. Found a left over remote from my old camaro, followed your example and whola, the car opens och close like a charm!! Thank you very much!
Awesome vid bro. I have a gifted 2000 Buick lesabre(only 40k) and I accidentally set off the panic button on the remote which somehow stop my remote from unlocking, locking and opening the trunk. (Oddly the panic button still worked though) Now this may be useful for you and others but I was able to reprogram the remote WITHOUT having to use the paperclip trick. Just by turning on the ignition and holding lock and unlock like you showed. Maybe another video with this in mind might help others and get you more views. Thank you for the video and getting me in the right direction towards this weird mishap with my ol" Buick.
Can confirm this method works on a 2004 Park Avenue. I think the OBD ports are always upside down on these cars. I programmed a replacement fob along with the original. You have to do both, otherwise the original will no longer work.
Dude, you're my hero if this works. I just ordered a couple fobs for my G6 and I've been scouring the internet for ways to program it through the ODB with an interface and software but it's expensive still and not guaranteed to support every model. Like someone else said in the comments, the battery clip is often the culprit. I bought my car used and it came with some universal remote and the battery clip tabs came clean off the board. I got it to work again with some copper tape but now it reset itself I guess. I bought 2 new fobs so I wouldn't end up going through this again after I get them programmed, so I hope this works. I'll try it with my old one in the meantime. Cleaning the graphite with rubbing alcohol on the inside of the fob shell could also help if your fob just stops working. Debris can accumulate and cause the buttons to not make contact well with the board. Just putting that out there in case anyone reads this and hasn't tried that yet (if it worked before and just stopped even with a new battery). Thank you for this video. I have new hope. Lol. I'll send you a 6 pack if all goes well.
Thank You so very much. I just got a 1998 deville. Not sure why , but the remote stopped working today. Found your video. I did everything except using the paper clip, And it worked. Thank you. 1 problem down , quite a few more to go.
The junk in the trunk of your car looks amazingly similar to the junk in my trunk. You sir have good taste. Hope to see you out on the water maybe we could wet our lines together some day
Each of the original 2 remotes for my 04 Cadillac Deville also controls the individual settings for my wife and I for the drivers seat and outside mirrors, as well as the door locks. Does programming new remotes as you've shown in your video also program for those features?
It will if you are able to program the remote to work your car. I have a 06 Cadillac and this method does not work on that car. I would contact the site that sells the remotes for specific instructions.
Hi everyone, I have a pontiac sunfire 2005. I have tried to use this video to work on mine., but I didnt see the port number 8 on my sunfire. Please help me solve my problem. Thanks
Hello, If you go to the site in the link you can enter your type of car. If it will, they will provide you with programming instructions for your specific vehicle. Thanks, Rick
my old one still works i just want an extra one....so that one wont work after i program my new one?...can i do the same procedure to the old one so they both work
If I remember correctly you can still program the original to match the new ones while in programming mode. But the procedure is different for all cars. This exact method wouldn't work on every model. You'll need programming instructions from the remote manufacturer for your particular car.
Hey I know it said that the original won’t work when you do this but could you reprogram the first one at the same time like you did with the two replacements or should I just order 2 as well … my original works fine I just want a spare fob just incase …
I have a 06 buick lacrosse and i have tried every trick and anything i could think of... I mean everything! The solution is to take it to a shop that has a tech 2 obd2 unit. They have to put the car into relearn mode which unfortunately has to be done with a tech 2 computer.
tried this on my 2002 Buick lesabre and it didn't receive the pins (paper clip) didn't lock and unlock when I put them in tried many times to adjust and hold move a few different times and still nothing, also not sure but I don't see the silver part on the 8th hole anymore.. any suggestions?
@@RickMammana oh ok, well I haven’t purchased new ones my old ones stopped working randomly when my engine light came on and I was trying to reprogram them with this method, not sure what happened but they were perfectly fine just before the engine light came on, I just got all the other stuff fixed but the fobs still aren’t working.
Hi, You should contact the company or person that is selling the correct remote for your car. They will have specific instructions for that model. They are all a little different.
Will this work on a 1998 Cadillac Deville? Also, will this procedure reprogram the ignition key? I do not want to do that. I just want the new remote to lock and unlock.
Each vehicle has specific programming instructions. You should get the instructions from where you buy the remote. A Cadillac service center will tell you how to reprogram the key. I had to do that once.
will this work on a 2000 Cadillac DeVille my service theft system light came on and now it is not working at all I can't open my doors I have to use my key to open my door
+cball 84 Hi, I'm not sure. I have an 06 Cadillac and this method does not work. But the site that sells the remotes will have specific instructions for your vehicle.
Rick Mammana I'm a Buick Fanatic & soon I'll be buying a 2000 Regal as my first car & question does this re programming key work on a 1997-2004 Regal as well?
Rick Mammana Why does these cars not chirping when You Lock & Unlock them? I have a 00' Pontiac Bonneville It doesn't chirp, But My '05 Impala does, is it becos it's not programmed to chirp or it was built that way from factory?
Nonny, I have an 01 Bonny and if you go through your manual, there is a process for setting up if you want lights, chirp, either, both. You can set it to how you want it.
I'm glad it worked for your Buick. Different models have different instructions, but this one is easy. Wish I still had the car, I love those big Park Avenues.
I have a 2000 buick regal and number 8 doesnt have a metal contact, therefore wont go into programming mode. Do you have a solution for this? Thank you.
+Robert Lucus Ok but it is different for different models of cars. Where you order the new remote they usually tell you how to program your specific vehicle! Thanks for watching.
Hi Rick I need to know if you can help me to program the control for a 2005 Chevrolet venture I try so many different Ways but nothing has work so far. Thanks
+Antonia Aburto Hi, You must contact the site selling the remote. They provide specific instructions for each model. Programming is different for all models. Some you even need a dealer to do. Wish I could help more.
What if port #4 doesn't have a contact tab and is empty like most of the 16 tabs on the panel? On our 2003 LeSabre panel, #8 has a metal contact tab, but #4 is just the plastic. Is there another combination with #8 that will also work to get to programming mode?
Each model car may have different programming instructions. This video was for that year Buick. You should contact the site that sells the replacement remotes for programming instructions for your specific vehicle.
Hi, I received the instructions from where I purchased the remote. There is a link in the video description where I bought it. It's different for different cars.
+vambo13257 Not the way I did it on this old buick. Newer cars will be different. You must contact the seller of the remotes for specific instructions for each vehicle.
What car?!? Might be helpful if you included what car NOT to do this method in. It clearly states it will work for all vehicles. Instead of complaining and adding zero value, why don’t you try doing something positive like hey guys, I have a _________ __________ and when I try this, it blew fuse number ____. That way, if someone else blows a fuse, you might help out and save them some time, and if they have the same car as you They may avoid trying this and look for another method saving them a fuse and some time!
I have the same type of remote for my 2002 Cadillac Deville I just bought a new from the locksmith yesterday and now it won't work and my car won't start will I have to reprogram it??
It's the weekend, so the seller isn't available, so I went Internet searching lol... my husband seems to think that's perhaps the issue as we have an aftermarket head unit in there, thanks Rick.
Where I bought the remote, instructions came with it for the specific car. Each model car will be different so you need specific instructions for each type of vehicle.
Hi, I'm sure this same method does not work on that car but email the site that sells the remotes and they should give you the right remote and instructions for your specific car. Thanks
I want a keyless entry for my car, 2001 Pontiac Grand Prix Se. This will be first time this car has ever had a remote so in order to do that I know I'd need a fuse and the remotes of course does the remotes you have come with the fuse?
Thanks for this video! I just programmed my remote to my Saturn. However, I now need to contact EBay because it said 2 and not one replacement remotes.
Hi, There should be instructions with the replacement unit that you bought. If not email the site that sells them and they will give you detailed instructions.
Would this make the keyless entry sign on the dashboard go away if I do this? Sometimes that turns on for no reason... and stays on.. or do i have a lose wire or something!?
Rick Mammana I think you misunderstood. You stated the original would no longer work, but after some research I believe that if you want to continue to use an original, it would have to be (re)programmed just like the second remote was done here. In other words, I hope can still use one (still good) old remote since I'm just buying one new remote.
+Rick Mammana yeah because I did it your way at the exact moment...it was pretty cool how it happened at the sametime. I could only imagine taking it to the shop costing me $100 dollars or more...anyway do you know how to fix fuel pumps too?because my gas gauge fluctuate alot....
I just traded my old truck in for a GMC 2006 Canyon and just found out that it has a remote keyless entry, however, after going to the local dealer to find out the cost to get just one remote and then paying another $100.00 to have it programed, they wanted to charge me over $200.00 for everything. Do you know if this truck has the same directions that was mentioned in the video? Also, do I have to buy a certain generic remote or will anyone work?
I would love your opinion! I tried doing what you did in the video on my 1997 Buick lesabre. I was not able to get the remote to sync. What happened was my radio/clock stopped working completely. Do you have any idea what happened and what I can do to fix it? Thanks.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Oh my gosh! I watched 5 other videos to program my new fob to my 97 Tahoe and not a damn one said anything about the paperclip in the program panel. I was getting so frustrated that I couldn't do it... So I gave up for a couple months figuring I had to take it to a shop to have it done, then I got bored and searched for more videos and BAM! This man saved the day, the paperclip thing worked and it programmed immediately! Thank you!
Worked like a charm on my 2003 Park Avenue. I’m ecstatic I didn’t have to go to the dealer, probably to be charged $100, to do this at home in 2-3 minutes. Thank you for the video!
I followed the exact direction that Rick Mammana gave, and used on
My 2003 Buick Park Avenue, using a used key fob, and it worked perfect. All for $10, the Buick garage wanted $140.00 for the fob and to program it.
Thanks Rick
I'm glad it worked for you. The same method doesn't work for all cars.
Does not work with a 2003 Buick Park Avenue. You can connect the pins all you want but no programming mode, which is consistent with all the other documentation over the internet. Had to try it before spending more money.
This was perfect, I was worried that during the rush hours of the holiday, I would have to drop my car off at the shop. But, nope thanks to this very helpful video I was able to reconnect my car keypads to my car. Awesome video, thanks!!!
Thanks. I have a 1999 Buick Park Avenue ultra supercharged 3.8 Engine. My Key Fob Transmitter when out around 1 ago. The Buick (GM) no longer carry them for my Vehicle. I called Auto Zone and it's $ 90.00. I checked on Ebay it's $ 22. 00. WOW. I will purchase it and will do exactly as you have demonstrated.
Excellant, worked perfect! Went to a locksmith to get extra key made, he was stumped about programming a new remote. Your instruction were clear & simple. Nice job, Thanks
Nice video Rick - technique works perfectly for a 1998 Park Avenue as well. The most common reason these key fobs fail is the battery clip solder joints on the circuit board become loose or disconnected. To fix this problem simply take a soldering iron and some rosin-core solder, and carefully touch up the 3 solder joints on the battery clip. No re-programming is necessary. With that done the vast majority of key fobs will work fine again.
The official fob instructions lied but this worked 🤙
Thank you so much for this information. I programmed two remotes, one for 2000 Buick and another for a 2004 Buick. Your help was GREAT!
how did you do it for the 2000 buick? mine doesn’t have the 8th little metal part where you’re supposed to put the paperclip in
Which model 2004 Buick? It won't work on my '04 LeSabre.
Recently purchased a Silverado '98 without remote, was planing to install aftermarket alarm. Found a left over remote from my old camaro, followed your example and whola, the car opens och close like a charm!! Thank you very much!
Ahhh Great! :)
You just saved me a minimum of $50! Thanks so much
Awesome vid bro. I have a gifted 2000 Buick lesabre(only 40k) and I accidentally set off the panic button on the remote which somehow stop my remote from unlocking, locking and opening the trunk. (Oddly the panic button still worked though) Now this may be useful for you and others but I was able to reprogram the remote WITHOUT having to use the paperclip trick. Just by turning on the ignition and holding lock and unlock like you showed. Maybe another video with this in mind might help others and get you more views. Thank you for the video and getting me in the right direction towards this weird mishap with my ol" Buick.
Thanks, worked on my 01 park ave
Totally works without the wire. Put it in the ignition and then press the lock/unlock buttons. 🔥 right up.
Can confirm this method works on a 2004 Park Avenue. I think the OBD ports are always upside down on these cars. I programmed a replacement fob along with the original. You have to do both, otherwise the original will no longer work.
I tried this for my 2003 Chevy Impala multiple times, however it did not work for me. I even changed out the batteries to make sure. Still no. 😣
Totally worked out. Much appreciated. Now I don't have to stick the key in the door. Thanks man.
Ah Great! It's a good feeling huh. :)
I'm about to do it tomorrow wish me lucj
The Dorman remote I got from Auto Zone for my granddaughters Malibu came with a plug-in programming module. It took less than a minute.
What year was the Malibu I need to know because I want to program my keyless. Malibu is 2003 how can I do ?
Dude, you're my hero if this works. I just ordered a couple fobs for my G6 and I've been scouring the internet for ways to program it through the ODB with an interface and software but it's expensive still and not guaranteed to support every model. Like someone else said in the comments, the battery clip is often the culprit. I bought my car used and it came with some universal remote and the battery clip tabs came clean off the board. I got it to work again with some copper tape but now it reset itself I guess. I bought 2 new fobs so I wouldn't end up going through this again after I get them programmed, so I hope this works. I'll try it with my old one in the meantime. Cleaning the graphite with rubbing alcohol on the inside of the fob shell could also help if your fob just stops working. Debris can accumulate and cause the buttons to not make contact well with the board. Just putting that out there in case anyone reads this and hasn't tried that yet (if it worked before and just stopped even with a new battery). Thank you for this video. I have new hope. Lol. I'll send you a 6 pack if all goes well.
The process will be different for all cars
You will need programming instructions from where you bought the replacement remote. Thanks for watching!
Thank You so very much. I just got a 1998 deville. Not sure why , but the remote stopped working today. Found your video. I did everything except using the paper clip, And it worked. Thank you. 1 problem down , quite a few more to go.
Thanks, Rick! You are a true genius 🤓. I appreciate ALL you have shared with us! Bless you.
I tried this on my 1998 Tahoe it worked great. Thanks for the video
Cool, new fob coming tomorrow, have paperclip, waiting with baited breath!
Nice tutorial. I love it, now I can program mine. Thanks for the video
So the paper clip in 8 & 4 basically replaces the obd scanner tool the locksmiths use to program the fobs? I have a 08 Buick Lacrosse CXL
Did it work for you
Hey no. My car is in some type of security learning mode thing when it comes to the programming of the remote.
The junk in the trunk of your car looks amazingly similar to the junk in my trunk. You sir have good taste. Hope to see you out on the water maybe we could wet our lines together some day
Tanks!!! Works for canyon gmc 2005??
worked perfect on my on my 02 buick park avenue thank you
Each of the original 2 remotes for my 04 Cadillac Deville also controls the individual settings for my wife and I for the drivers seat and outside mirrors, as well as the door locks. Does programming new remotes as you've shown in your video also program for those features?
It will if you are able to program the remote to work your car. I have a 06 Cadillac and this method does not work on that car. I would contact the site that sells the remotes for specific instructions.
You could have reprogrammed the original remote just by putting it in the 3rd programming order. You can program up to four remotes.
Pls explain I wish to use my original remote
Can you help
Thanks for the video. I was able to program a new key fob for my park avenue. 👍👍👍
I have a question do we have to get a specific fob or does it not matter and i can just order one on amazon?
You must contact the site selling the remotes for instructions on programming for your specific vehicle! Thank you for visiting.
Thank you so much Rick! Just saved me $50 at dealership:)
+Rex Blackwell Glad if I could help!
Thanks it worked on my Pontiac bonneville
What year is it
98 Pontiac Bonneville
Big Rick : Thanks for the instructional video.I will attempt to program my remote key fobs asap after I find a paper clip.
The instructions are different for each model of car. You could do damage if you don't get specific instructions from the maker of the remote.
How do you find out the manufacturer of the remote? Thank you for this video!
you are awsome, thank you soooooooooo much, You cant believe how much Car Dealers charge for this...... thank you
Great! I'm glad if I could help!
Hi I tried this with 2002 Chevy Suburban and it didn't work. What could be the problem? Maybe wrong keyfobs?
You must contact the site selling the remotes for instructions on programming for your specific vehicle! Thanks for watching!
Worked on my 2000 Buick Park avenue, thanks!
👍👍
Hi everyone, I have a pontiac sunfire 2005. I have tried to use this video to work on mine., but I didnt see the port number 8 on my sunfire. Please help me solve my problem. Thanks
This didn't work for my chevy impala 2002. I have port 4 but no 8. Is another port that puts the chevy in programming mode?
I'm not sure. You must contact the site selling the remotes for instructions on programming for your specific vehicle.
@@RickMammana Thanks.
hello sir! will it work on 2004 saturn vue?
Hello, If you go to the site in the link you can enter your type of car. If it will, they will provide you with programming instructions for your specific vehicle. Thanks, Rick
@@RickMammana 4:43
So is it number four and eight on all Pontiac years. 2006 Pontiac solstice?
You should always check specific programming instructions where you bought the remote. Each vehicle is different. You might cause damage.
Just so you all know you don’t need the paper clip. Just do all That without it and it works the same. Just did it on my 99 Cadillac
What model?
@@BigOwen_did not on my 2003 lesabre either with the clip or without the clip must be another technique
You mean no jumper?
my old one still works i just want an extra one....so that one wont work after i program my new one?...can i do the same procedure to the old one so they both work
If I remember correctly you can still program the original to match the new ones while in programming mode. But the procedure is different for all cars. This exact method wouldn't work on every model. You'll need programming instructions from the remote manufacturer for your particular car.
Hey I know it said that the original won’t work when you do this but could you reprogram the first one at the same time like you did with the two replacements or should I just order 2 as well … my original works fine I just want a spare fob just incase …
👍
Yep that easy paper clip saved the day.
But I think mines on the 05 buick lacrosse doesn't respond well. Might need to replace the module
It's different for each model car, I'd contact the company that sells the remotes for programming instructions.
Will putting the paper clip in electrocute me?
Khrazy_one: probably. just don't run towards your car carrying a pair of scissors.
no it will not
No its like hooking up your Desk top to a printer etc.
Khrazy_one its only 12 volts it won't do anything to hurt yourself
I wonder will this work on my 2001 Old Aurora?
I have a buick lacrosse 2005 I need to know how to program or if it’s possible so I can program mine I tried it didn’t do anything
I have a 06 buick lacrosse and i have tried every trick and anything i could think of... I mean everything! The solution is to take it to a shop that has a tech 2 obd2 unit. They have to put the car into relearn mode which unfortunately has to be done with a tech 2 computer.
would this programming u just did work on 06 cadillac cts ?
Did it work?
tried this on my 2002 Buick lesabre and it didn't receive the pins (paper clip) didn't lock and unlock when I put them in tried many times to adjust and hold move a few different times and still nothing, also not sure but I don't see the silver part on the 8th hole anymore.. any suggestions?
You must contact the site selling the remotes for instructions on programming for your specific vehicle. Each year and model are different.
@@RickMammana oh ok, well I haven’t purchased new ones my old ones stopped working randomly when my engine light came on and I was trying to reprogram them with this method, not sure what happened but they were perfectly fine just before the engine light came on, I just got all the other stuff fixed but the fobs still aren’t working.
Will this mess up the computer? Or Will this work for an 2002 GMC Sierra? don't really want too spend $150 for 1 @ the dealer
+Patrick Palacios Hi, I would contact the site that sells the remotes for instructions on your specific car.
+Rick Mammana ok thank you
How could I find out if this would work for a 2003 Oldsmobile? I haven't found this trick anywhere elae.
Hi, You should contact the company or person that is selling the correct remote for your car. They will have specific instructions for that model. They are all a little different.
Will this work on a 1998 Cadillac Deville? Also, will this procedure reprogram the ignition key? I do not want to do that. I just want the new remote to lock and unlock.
Each vehicle has specific programming instructions. You should get the instructions from where you buy the remote. A Cadillac service center will tell you how to reprogram the key. I had to do that once.
I only bought one new remote, can I still use my old one, there was nothing wrong with it I just needed an extra one.
Yeah but you'll have to program them both, using the instructions for your specific car. :)
Rick Mammana thank u!
will this work on a 2000 Cadillac DeVille my service theft system light came on and now it is not working at all I can't open my doors I have to use my key to open my door
+cball 84 Hi, I'm not sure. I have an 06 Cadillac and this method does not work. But the site that sells the remotes will have specific instructions for your vehicle.
I bought another key fob if I program the new one will the old one still work?!?
You must contact the site selling the remotes for instructions on programming for your specific vehicle!
Rick Mammana I'm a Buick Fanatic & soon I'll be buying a 2000 Regal as my first car & question does this re programming key work on a 1997-2004 Regal as well?
Mark from [fordmustang98guy] You must contact the site selling the remotes for instructions on programming for your specific vehicle.
Rick Mammana Why does these cars not chirping when You Lock & Unlock them? I have a 00' Pontiac Bonneville It doesn't chirp, But My '05 Impala does, is it becos it's not programmed to chirp or it was built that way from factory?
Nonny, I have an 01 Bonny and if you go through your manual, there is a process for setting up if you want lights, chirp, either, both. You can set it to how you want it.
It really works y'all I just did it
I gotta 2000 Buick Park Avenue it really worked!! Gotta have dat paperclip
I'm glad it worked for your Buick. Different models have different instructions, but this one is easy. Wish I still had the car, I love those big Park Avenues.
How do I program my 2003 Cadillac CTS with the same Key Fob
My mom has a 2007 Buick Lacrosse will this work to program her romote keyless fob?
Do you know if this will work on a 2004 cadillac deville?
I have a 2000 buick regal and number 8 doesnt have a metal contact, therefore wont go into programming mode. Do you have a solution for this? Thank you.
Hi, I would contact the site that sells the remotes for instructions on your specific car.
wow that was fantastic now I know how to do it unbelievable I'll try and get back to you thanks a lot you did a great job
+Robert Lucus Ok but it is different for different models of cars. Where you order the new remote they usually tell you how to program your specific vehicle! Thanks for watching.
Hi Rick I need to know if you can help me to program the control for a 2005 Chevrolet venture I try so many different Ways but nothing has work so far. Thanks
+Antonia Aburto Hi, You must contact the site selling the remote. They provide specific instructions for each model. Programming is different for all models. Some you even need a dealer to do. Wish I could help more.
Mister Rick, muchas gracias!!! I liked your video.
What if port #4 doesn't have a contact tab and is empty like most of the 16 tabs on the panel? On our 2003 LeSabre panel, #8 has a metal contact tab, but #4 is just the plastic. Is there another combination with #8 that will also work to get to programming mode?
Each model car may have different programming instructions. This video was for that year Buick. You should contact the site that sells the replacement remotes for programming instructions for your specific vehicle.
If your original remote dont have the open truck button and i get these, will the truck open? I have a 2007 saturn outlook
Hello! Question, how did you know to use 4 & 8 on your fuse box??
Hi, I received the instructions from where I purchased the remote. There is a link in the video description where I bought it. It's different for different cars.
+Rick Mammana Thank you!
98 Monte Carlo ls didn't work for my remote but it did manage to cut the power from my stereo I believe I blew a fuse
Should this work for a 2006 LaCrosse, Thanks?
+vambo13257 Not the way I did it on this old buick. Newer cars will be different. You must contact the seller of the remotes for specific instructions for each vehicle.
Thanks Rick, I appreciate the info!!
This made me blow a fuse in my car. Check your owner's manual for different instructions.
What car?!? Might be helpful if you included what car NOT to do this method in. It clearly states it will work for all vehicles. Instead of complaining and adding zero value, why don’t you try doing something positive like hey guys, I have a _________ __________ and when I try this, it blew fuse number ____. That way, if someone else blows a fuse, you might help out and save them some time, and if they have the same car as you They may avoid trying this and look for another method saving them a fuse and some time!
I have the same type of remote for my 2002 Cadillac Deville I just bought a new from the locksmith yesterday and now it won't work and my car won't start will I have to reprogram it??
+Mayeane Simms For a newer car like that you'll probably need a dealer to program it.
Do you need to have a factory head unit for these to calibrate properly, cause we tried this with 98 Park Avenue and it wouldn't work.
+Lisa LeFaive I'm sorry I don't know. Maybe contact the seller of the remotes for instructions for your specific car.
It's the weekend, so the seller isn't available, so I went Internet searching lol... my husband seems to think that's perhaps the issue as we have an aftermarket head unit in there, thanks Rick.
+Lisa LeFaive Ok. It's hard to say cause that year and model is real close to the one that I did it on. Good Luck with it.
Also for Saturn Ión 2006?
Do you know if this will work on an 08 Impala?
You should contact the site selling the remotes for instructions on programming for your specific vehicle!
@@RickMammana haha thanks! To program a new remote on a newer Impala all you need to do is go in the DIC & select relearn remote key. So easy!
@@jamesolson205 Yeah I know some are real easy.
How did you find out about the 4 and 8? Just curious.
Where I bought the remote, instructions came with it for the specific car. Each model car will be different so you need specific instructions for each type of vehicle.
@@RickMammana Thx. I'll try the 4 and 8 on our 03 LeSabre because I'm not finding anything with our fob purchase or online.
does the alarm work ? khrazy 1if the shoe fits maybe if you put the paperclip but in your mouth when you connect them together lol...................
If I'm just adding a key fob NOT replacing one, will the first one still work after I add the new one?
You will need to reprogram. Both remotes if you enter the programming mode
hello it does not work for me on chevrolet cavalier sunfire Ls convertible 1997
Is this the procedure for 2002 Buick Lasabre?
Hi, I couldn't say off hand, I would email the site where you buy the remotes for your specific vehicle. Thanks
+Rick Mammana thanks Rick. Nice last name by the way..
+Adam Mammana Oh Yeah! I was gonna say! You must be a cool guy!
+Rick Mammana I have never met anyone other than a family member with our last name. I am pretty cool, sometimes....
+Adam Mammana Yeah, I know what you mean. I like that we don't have a common name! :)
hey friend my car is the same buik 1997 so should i do it rigth like you?
+chilipondio “el jaac” barrera Yes it should work if it's the same car.
+Rick Mammana thanks my friend it works perfect thankyou thankyou thankyou you did it
hey Rick! Did u remove Radio fuse? What do u think about Camaro 98? Will be work or not? Must i remove Radio fuse? Thanks!
Nazi Grammar Hi, You must contact the site selling the remotes for instructions on programming for your specific vehicle! :)
it's regular Chevy Camaro. I bought 2nd remote and instruction from the site didn't fit(
does this work on a 2005 impala I have an after market radio?????
Hi, I'm sure this same method does not work on that car but email the site that sells the remotes and they should give you the right remote and instructions for your specific car. Thanks
It work?
Can confirm does work for 2003 park Ave.
Dose this worked for the 2007 Chevrolet Cobalt Lt ? Thanks
+xingxing han Hi, You would have to contact the site that sells the remotes for your specific car. In the link in the description of the video.
I want a keyless entry for my car, 2001 Pontiac Grand Prix Se. This will be first time this car has ever had a remote so in order to do that I know I'd need a fuse and the remotes of course does the remotes you have come with the fuse?
putting in an obd reader also works. thanks
👍👍
Thanks for this video! I just programmed my remote to my Saturn. However, I now need to contact EBay because it said 2 and not one replacement remotes.
What year is your Saturn? Mine is 2006. Thinking of buying new fobs.
How can I program the remote chevrolet cavalier 97 but I didnt see the port number 8 on my cavalier? please help me
Hi, There should be instructions with the replacement unit that you bought. If not email the site that sells them and they will give you detailed instructions.
Would this make the keyless entry sign on the dashboard go away if I do this? Sometimes that turns on for no reason... and stays on.. or do i have a lose wire or something!?
Original will not work? Can you re-program the original so it will?
Well sometimes the are broken circuits in there. You can look up how to repair it, if that's the case.
Rick Mammana I think you misunderstood. You stated the original would no longer work, but after some research I believe that if you want to continue to use an original, it would have to be (re)programmed just like the second remote was done here. In other words, I hope can still use one (still good) old remote since I'm just buying one new remote.
Ohh, Yeah you could program or reprogram as many remotes that you have when your in programming mode, sorry I was half asleep. :)
I love this video you saved me alot of Time....if it wasn't for you idk what I would do....I appreciate this alot
+STP Johnson I'm glad if I could help!
+Rick Mammana yeah because I did it your way at the exact moment...it was pretty cool how it happened at the sametime. I could only imagine taking it to the shop costing me $100 dollars or more...anyway do you know how to fix fuel pumps too?because my gas gauge fluctuate alot....
+STP Johnson Cooool!
+STP Johnson Oh no, I'm probably not too good with fuel pumps. I'd look it up though, you'll probably find out how to do it.
I just traded my old truck in for a GMC 2006 Canyon and just found out that it has a remote keyless entry, however, after going to the local dealer to find out the cost to get just one remote and then paying another $100.00 to have it programed, they wanted to charge me over $200.00 for everything.
Do you know if this truck has the same directions that was mentioned in the video?
Also, do I have to buy a certain generic remote or will anyone work?
sharpasatac131 did you ever figure it out?
Does it work on 2004 chevy impala ss
Any advice for a key fob for a deville 2004
I would love your opinion! I tried doing what you did in the video on my 1997 Buick lesabre. I was not able to get the remote to sync. What happened was my radio/clock stopped working completely. Do you have any idea what happened and what I can do to fix it? Thanks.
+Shelly Misco Hi, You must contact the site selling the remotes for instructions on programming for your specific vehicle!
Loved the video you saved me a bundle of money
does that work for a grand prix 2004??
Hi Rick. my 2007 Pontiac G6 don't have the metal contact in 8 spot. Any ideas?
Hi, I would send and email to the place that sells the remotes. They usually can tell you the correct way for your specific model. :)
Thanks Rick. I appreciate it very much. I won't ask you for another pressure cooker. lol. I hope you know I was just teasing you. 😁😇
Worked with my 1998 Oldsmobile Regency, Thanks man !
Cool! I'm glad!