Awesome setup. You are ready to go. Glad to see that you invested in US-Owned and US-Made tools for the most part. 👍 Many ppl go red and dont even realize it's been Chinese owned for decades.
You have ALOT of nice brand new tools, none of them look like they have ever been used. How about a video of a normal work day? Starting to think this guy is stealing master electrician valor, lol. Just kidding man, sweet set up.
All the gear looks pretty new, did your van get broken into? Great tour, not many people keep more gear in the van than me and you're one of them! If you're not sponsored by klein - you probly should be 😂😂
I have had plenty of tools stolen and i refuse to buy used (most likely stolen) I also upgraded my older 18 volt stuff since i had to replace the stolen items anyway.
I am at AWE at your setup. Fantastic organization and I aspire to be in your place one day. I recently got my red seal ticket and one day I'll get my masters as well. Thank you for this video!
Yes I do and yes most are new or newer tools to replace what was stolen or just outdated. The tough system is all new because I needed a storage system that works and I like dewalt. I am semi retired so I work when I want and I pick the jobs I want which are all charity now at this point so I only get paid cost.
With all those tools, where do you put materials? For service calls: Various size/color thhn, romex, various flex, boxes:bell,nail-on, surface, pvc, 1gang, 2gang, round, fan rated, new work, old work, blanks, screws,anchors, hardware, pipe, breakers, fittings(pvc, emt,flex,rigid), various color devices/plates, Rubbermaid cart for Comercial jobs where the work is a long walk to carry tools/materials. I see that bad ass PTouch and none of your pack-outs are labeled, you must have a good memory to know where everything is. Also a set of materials for at least 3 jobs you’re currently doing. I don’t know how you do it! Can you make more videos?
The van set up is new with new tough system boxes . All the tools will not be n my van at the same time … job dependent. Got a new shop with a tough system set up as well and with both I will be able to load the van as needed .
He just said he doesn’t use a broom and dust pan to clean up his mess after he is done. So if you want him to do a service call in your home, be waiting to clean up after him.
@@weekendmasterelectrician5900 but of course everything in the van is pristine brand new just like the brush and dust pan so makes me wonder if you are working. SMH
Just picked up on of the Dewalt multi tools from Home Depot yesterday. It came with a battery charger and two blades. All for $99. Got to use it today on a glycol line in a freezer! Definitely came in clutch!
Don’t know why people still buy these Chevy vans that are 30 year old design. Chevy doesn’t even offer discounts on these vans. They keep up with the mechanical technology but everything else was designed 30 years ago. The other newer style vans are far better.
Yes I do agree but I bought this van a few months. ago and its a 1999 chevy express 3500 with only 43,000 miles on it. Never used for a service or construction van. An older couple bought becuase they needed a van to sell their BBQ sauce out of. I got for 6k inspected. If you see my instagram page when i bought it you will see it is in perfect condition. Side note: these vans still have the "BALL CHILLER" vent under the steering wheel for those hot days.
@@austinthibeault1294 do you think thieves just pick what they want want and leave the rest..... well maybe you do because you probably still live at home
Love the video mam. Van looks amazing. I'm an electrician too. I've been in the trade since I was 18 im now 24 and love everyday of it. Just wanna ask you what power tools or other ones do you recommend for an apprentice. I have the the hand tools down no problem and impact hammer drill Sawzall and multi tool but i want to be prepared for everything. Any help would do thanks
I have used various brands. My first power tools were Makita but realized that Dewalt were better. I did leave dewalt and tried Milwalkee but just felt like Dewalt was a better fit for me. This was all decided 20 years ago . I have just replaced most of my worn out 18 volt stuff with the new 20 volt stuff and everything is great. To be honest; now if you go with dewalt ,milwalkee, bosch you can't go wrong. All of them offer great tools and variety. I stayed with dewalt because they never failed on me.
@@weekendmasterelectrician5900 I have all milwaukee m18 and I feel ya on the never go wrong part. I still have my brushed impact cuz it has yet to blow up from the abuse we put it threw lol. I want to start investing in more tools I just don't know what else to get. We do alot of commercial work and some rezy but not alot.
Not that I have already said this but most tools on here are replacement tools from worn out tools or tools that were stolen. This video is 2 years old and my tools do not look like this now....I hope you can sleep better now. Or at least troll someone else .
@@weekendmasterelectrician5900 Have you tried it? Unless its much thicker over there i promise it works, you just stick the spring in and then bend it over your knee
@@weekendmasterelectrician5900 Ah i don't know what that means we have light medium and heavy gauge but it can all be bent, would be interesting to see
Awesome setup. You are ready to go. Glad to see that you invested in US-Owned and US-Made tools for the most part. 👍 Many ppl go red and dont even realize it's been Chinese owned for decades.
You have some real cool tools! You also have a tool for literally everything 😮 great video! Awesome tour!
ive seen most of the electrician van tours on yt, this fella is by far the most equipped one of the lot
You have ALOT of nice brand new tools, none of them look like they have ever been used. How about a video of a normal work day? Starting to think this guy is stealing master electrician valor, lol. Just kidding man, sweet set up.
these were replacement tools for all my old 18v stuff.....none look new now.
All the gear looks pretty new, did your van get broken into? Great tour, not many people keep more gear in the van than me and you're one of them! If you're not sponsored by klein - you probly should be 😂😂
I have had plenty of tools stolen and i refuse to buy used (most likely stolen) I also upgraded my older 18 volt stuff since i had to replace the stolen items anyway.
The passive aggressive camera adjustments cracked me up haha. Awesome set up.
I am at AWE at your setup. Fantastic organization and I aspire to be in your place one day. I recently got my red seal ticket and one day I'll get my masters as well. Thank you for this video!
I know I already made some mistakes. My label maker is a Brother P-Touch -E550W
Great video very organized, but your tools look brand new do you use them?
Yes I do and yes most are new or newer tools to replace what was stolen or just outdated. The tough system is all new because I needed a storage system that works and I like dewalt. I am semi retired so I work when I want and I pick the jobs I want which are all charity now at this point so I only get paid cost.
With all those tools, where do you put materials? For service calls: Various size/color thhn, romex, various flex, boxes:bell,nail-on, surface, pvc, 1gang, 2gang, round, fan rated, new work, old work, blanks, screws,anchors, hardware, pipe, breakers, fittings(pvc, emt,flex,rigid), various color devices/plates, Rubbermaid cart for Comercial jobs where the work is a long walk to carry tools/materials. I see that bad ass PTouch and none of your pack-outs are labeled, you must have a good memory to know where everything is. Also a set of materials for at least 3 jobs you’re currently doing. I don’t know how you do it! Can you make more videos?
The van set up is new with new tough system boxes . All the tools will not be n my van at the same time … job dependent. Got a new shop with a tough system set up as well and with both I will be able to load the van as needed .
Once I am settled in my new location, more videos are getting lined up.
Great setup but who’s behind the camera
My youngest son who did a fantastic job.
He just said he doesn’t use a broom and dust pan to clean up his mess after he is done. So if you want him to do a service call in your home, be waiting to clean up after him.
I hope yoou realize it was just a joke.....but maybe you didn't. SMH
@@weekendmasterelectrician5900 but of course everything in the van is pristine brand new just like the brush and dust pan so makes me wonder if you are working. SMH
@@austinthibeault1294 another keyboard commando snowflake lol keep hatin' snowflake.
Just picked up on of the Dewalt multi tools from Home Depot yesterday. It came with a battery charger and two blades. All for $99. Got to use it today on a glycol line in a freezer! Definitely came in clutch!
Don’t know why people still buy these Chevy vans that are 30 year old design. Chevy doesn’t even offer discounts on these vans. They keep up with the mechanical technology but everything else was designed 30 years ago. The other newer style vans are far better.
Yes I do agree but I bought this van a few months. ago and its a 1999 chevy express 3500 with only 43,000 miles on it. Never used for a service or construction van. An older couple bought becuase they needed a van to sell their BBQ sauce out of. I got for 6k inspected. If you see my instagram page when i bought it you will see it is in perfect condition. Side note: these vans still have the "BALL CHILLER" vent under the steering wheel for those hot days.
You are really fortunate that you get to do so much fishing when your not wiring!
Well i am semi-retired...also I am my own boss.
You don’t need rapid charger with the mad amount of battery u got…lol
I really only use the rapid charger for the big batteries 12ah & 15ah
@@weekendmasterelectrician5900 wow. u still here. got it. thanks
@@ometofu I will be posting more vids soon. Moved from Maryland to Indiana so I am a little behind.
This video was absolutely awesome very informative....Amazing set up
Wow I love your van setup
Nice video. -thanks for sharing!
I love the lights. I’ve been looking for something like that for mine. Where did you get them and how did you wire them. Please and thank you
Amazon and tied them in to the existing dome light wiring.
Really enjoyed this. Thank you
Do you actually do any work? Everything is brand new!
I replaced my 18 volt stuff with 20 volt. Yes mostly everything is newer thanks to thieves. Hopefully you dont have to go through that.
Also I clean my tools so they look better longer .
Lol yea everything is all brand new not just all dewalt stuff been replaced.
@@austinthibeault1294 do you think thieves just pick what they want want and leave the rest..... well maybe you do because you probably still live at home
Love the video mam. Van looks amazing. I'm an electrician too. I've been in the trade since I was 18 im now 24 and love everyday of it. Just wanna ask you what power tools or other ones do you recommend for an apprentice. I have the the hand tools down no problem and impact hammer drill Sawzall and multi tool but i want to be prepared for everything. Any help would do thanks
I have used various brands. My first power tools were Makita but realized that Dewalt were better. I did leave dewalt and tried Milwalkee but just felt like Dewalt was a better fit for me. This was all decided 20 years ago . I have just replaced most of my worn out 18 volt stuff with the new 20 volt stuff and everything is great. To be honest; now if you go with dewalt ,milwalkee, bosch you can't go wrong. All of them offer great tools and variety. I stayed with dewalt because they never failed on me.
@@weekendmasterelectrician5900 I have all milwaukee m18 and I feel ya on the never go wrong part. I still have my brushed impact cuz it has yet to blow up from the abuse we put it threw lol. I want to start investing in more tools I just don't know what else to get. We do alot of commercial work and some rezy but not alot.
You have 1 home depot in your van
great set up
Looking forward to the tool bag video
The rack is genius!
What brand of meters you choose ?
I use both Klein and Fluke
Why is everything brand new and unused?
Not that I have already said this but most tools on here are replacement tools from worn out tools or tools that were stolen. This video is 2 years old and my tools do not look like this now....I hope you can sleep better now. Or at least troll someone else .
wow, thank u.
What brand and model is of pvc heater?
Greenlee
U gotta go with the little giant king kombo ladders. I like the way your truck set up. Great job brother. Keep it up
I was looking at those and most likely go in that direction
Nice video and beautiful service van.
I wish you success in your work
Damn this is a crazy setup ! Awesome job
Awesome video Bennett did a great job!
He is my new camera man. He wants to come on jobs with me and video as well.
That would be awesome
Very very nice set up!!!
Your van is so clean. Love it!
Nice🔥
Nice video.
Do you guys in the states not just have bending springs for your PVC conduit? You should try one it saves lugging that big heater about
Can't bend our PVC that way. Must be heated to bend.
@@weekendmasterelectrician5900 Have you tried it? Unless its much thicker over there i promise it works, you just stick the spring in and then bend it over your knee
@@Darkonon I will try it out on a video and post it. Always broke when trying to bend it. (schedule 40 or 80 pvc) pretty thick stuff.
@@weekendmasterelectrician5900 Ah i don't know what that means we have light medium and heavy gauge but it can all be bent, would be interesting to see
My apprentice is the ground rod attachment. Good stuff brother. You have everything. Stay safe!