Biggest advantage of having Watts’s linkage propeller pivot mounted on car chassis is unchangeable height of rear roll center. You can also easily change roll center height putting center propeller pivot up or down. And another advantage is that axle is not moving left and right with suspension trevel.
I truly admire the work put into this, but wouldn't it be better to fit there a BMW e21 or e30 suspension? Independent always is better than solid axle.
I would not agree just like that that independent is always better but in most cases it is. You can see that we started to convert our rear suspension in this video ruclips.net/video/Pg1dKTlKt58/видео.html
@@RallyJunkies ok, so You'll be making an e36-like suspension. Also good, better than e30 trailing arms. There is a Polish drift project Lada 2105. 3.0L BMW V8, front suspension from e36, rear from e39. Check it out.
@@HuiloPu Yes we have all drawings and sketch from watts linkage suspension. Our rear suspension is on sale. You can bought only drawings if you like. Contact us for more details on: rallyjunkies@gmail.com
@@RallyJunkies Its quite often for lada owners to hate oem axle and wish to swap it for more heavy axle from another cars without understanding that another heavy peace of steel needs 'thicker' suspension components and mounting points
Почему-то никто такие тупые комменты не пишет ни людям со старыми тойотами, ни американцам которые до сих пор ставят мосты в свои гоночные машины. А как речь заходит речь про Жигули так полные комменты какого-то дерьма
Props to camera man for risking his life while capturing test ride at rally
Haha thanks a lot I just spit my beer out because of your comment! :D
Excelente trabajo !👌Abrazo desde Argentina 🇦🇷
Thanks !!
Есть чертёж данного конструктива? Я планирую ремонт своего авто с улучшениями.
Yes we have, our rear suspension is on sale. We switch to IRS: ruclips.net/video/qCTgqBsI3Uk/видео.html
Nice engineering
Thank you!!
que amartiguadores son GAS O ACEITE
This dampers are combination of oil and gas, gas is in small containers. They have 3 way of adjustment.
How much does something like that cost?
Complete car with Independent rear suspension is about 5 years of work and some 24 thousand euros..
Why doesn’t this need a swayswaybar?
Because you can compensate swaybar with some other geometry parameters.
Where can I buy this parts ?
contact us on rallyjunkies@gmail.com
Как это работает?
Моя голова этого не понимает.
Механизм Уатта закреплён на мосту.
А середина к чему крепится?
Середина крепится к кузову. Можно наоборот, середину закрепить на мосту, а края к кузову.
Biggest advantage of having Watts’s linkage propeller pivot mounted on car chassis is unchangeable height of rear roll center. You can also easily change roll center height putting center propeller pivot up or down. And another advantage is that axle is not moving left and right with suspension trevel.
@@Alan1.8 This way is better because roll center does not change distance to the center of mass so the car is more predictable.
@@RallyJunkies Yes I inderstend
I truly admire the work put into this, but wouldn't it be better to fit there a BMW e21 or e30 suspension? Independent always is better than solid axle.
I would not agree just like that that independent is always better but in most cases it is. You can see that we started to convert our rear suspension in this video ruclips.net/video/Pg1dKTlKt58/видео.html
@@RallyJunkies ok, so You'll be making an e36-like suspension. Also good, better than e30 trailing arms.
There is a Polish drift project Lada 2105. 3.0L BMW V8, front suspension from e36, rear from e39. Check it out.
@@RallyJunkies
In rally conditions IRS is always better, and its not only about the geometry.
Прикольно, стабилизатор не нужен. Фланец усилен двумя тягами - можно вдувать на все деньги.
Higher roll center reduces body roll, and we manage to drive it without sway bar link.
Сам мост от лады? Или от Вольво 740
I did not understan the question. Axle is from Lada Niva and all other stuff is custom made.
@@RallyJunkies есть чертёж трапеции бля Уатта?
@@HuiloPu Yes we have all drawings and sketch from watts linkage suspension. Our rear suspension is on sale. You can bought only drawings if you like. Contact us for more details on: rallyjunkies@gmail.com
@@RallyJunkies Its quite often for lada owners to hate oem axle and wish to swap it for more heavy axle from another cars without understanding that another heavy peace of steel needs 'thicker' suspension components and mounting points
Хороший якорь получился .
Wi still did not test bend in real life so far... :-)
очень красиво
Все по серйозному клас.
🥰😗šalje ti jakić
да уж... ...независимая задняя, жигулям до сих пор только снится )))
Почему-то никто такие тупые комменты не пишет ни людям со старыми тойотами, ни американцам которые до сих пор ставят мосты в свои гоночные машины.
А как речь заходит речь про Жигули так полные комменты какого-то дерьма
@@stuvademakaroner9607 наверное нужно научиться понимать, смысл лексических фразеологизмов )))
We will make her dreams true, preliminary sketch are here already:
ruclips.net/video/LH_4ck2b4ng/видео.html
More details in upcoming videos...