BX (with loader) Filter Upgrade and Full Fuel Line Replacement
HTML-код
- Опубликовано: 13 сен 2024
- I replace the fuel line with gates barricade and add a Racor filter for better filtration. The Racor is the best filter for the BX.
~-~~-~~~-~~-~
Please watch: "Kubota BX Grading and Filling Hole"
• Kubota BX Grading and ...
~-~~-~~~-~~-~
i really appreciated the way he went right into doing the job with no showing techniques, etc. also i did not have to sit and watch him tighten nuts since he sped up the tape during the mundane activity. i may have to watch a few times to figure it all out, but sure looks good and doable for me. thanks
Thanks for the good feed back! Good luck with your project.
Thanks for your video. I installed a Racor 120AT on my 25D. The OEM bottome filter was jammed up over the rear skidplate and was already getting pretty loaded with crud (164 hours). So this was a timely upgrade. I also live in Alberta where it got below -40C this winter so a dependable fuel system is a must. The other filter closer to the engine looks to be in good shape so I have left it in the loop pending the upcoming 200 hour service. I designed my bracket to go over two vertical oriented bolts instead of the horizontal method you used. This enabled me to add a guard plate in front of the filter unit for extra protection. My son is a welder and he put the design together for me. Your video helped me with my install so thanks!
I did mine almost identical to the one ur doing. Only difference being I added an in line shut off valve at the filter to make easier to change filter and avoid possibly having to bleed system. Good job and is a big improvement to the BX. I really enjoy ur videos. Keep on keeping on!
Shut offs are not a bad idea. I have a pair of hose pinch off pliers I can use. Thanks about the videos! Thanks for watching and commenting!
Bleeding the system on a bx is the equivalent of turning youre key part way for 30 seconds.
Fantastic! Just the video I needed to fix my BX in Victoria, Australia. Everything I needed to know from tools to process
Great to hear!
In addition to detailed service records, I also like to write date, hours, and my initials with a fine point sharpie on the filters and such where they can be easily seen preferably after install.
Most on the tractor forums get the $22 ebay copies with no issues , get a 5/16 double barbed end brass connector to allow adding longer hose to the filter and run to the pre filter on the engine.
I have a video where I compare the cheaper filter to a racor. ruclips.net/video/y2Boch9ackM/видео.html
Nice install, well done. If you use the wix inline filters becareful they are a little larger in diameter and the retainer clamp can pinch and break the plastic on the filter. I found using a couple washers on the mounting bolt between the clamp was a better fit.
Thanks! Good tip on the filter.
I'm having an issue why you disassembled the tractor. Not needed to do the fuel filter relocation modification. It's a simple 1 hour job.
Great video. Will be doing this very soon.
Thanks! Good luck with the install!
Just finished the install of my Racor 120AS fuel filter/water separator. Looks great. I didn't need to replace all the fuel lines as my tractor only has 66 hours on it. With that said I started to have loss of power issues at about 58 hours, first when I had the mower PTO engaged, then all the time. I determined after investigating this was a common issue with these BX tractors as they have low end fuel filter on them. I replaced the first fuel filter which is way under the tractor behind the fuel pump. It was a pain the the butt to get to and even harder to remove the filter. My problem was solved. I could not even think about changing this filter again, especially when I really need the tractor as it was a 2-3 hour job (remove mower deck, remove protection plate, remove filter which is in a tight place, and reverse to reinstall). So I choice to do as you did in your video and install this high end filter/water separator. I did use a slightly different style bracket because of my tractor. Just double check your wheel clearance (with wheels all the way turned) in your mounting bracket as I had to re-adjust after I installed it. But looks great! Thanks for the video, very informative!
Very nice job love that you can see if there is water in to or not ! i am going to to this mod to my Kioti when i get time ! take care have a great weekend ! curt :-)
Thanks, Curt. The Racor filters are tough to beat.
Bullitt: that's some comprehensive work. Man, it hurts my back and neck just thinking about crawling under that tractor to gain access to parts (chuckle). Nice installation job. Thanks for showing us that original fuel filter filled with GUNK. How does tractor run now after nice fixes? I bet owner can detect a smoother take off when he presses on pedal. Nice video.
Thanks! The guy had been having problems with the tractor for over a year. He put a fuel stop solenoid on it and fuel cap. Neither fixed his problem. He told me to use and get it to act up. I showed him my racor filter setup and he wanted to do that. Since it had a back hoe on it I did some digging with it. It never acted up. Then when I got off the BH and went to move it, it cut out. I let of the hydro pedal and it was fine. Hit the hydro pedal and it cut out. So I hooked up a test light to the seat switch and watched it when it cut out and the test light went out. He had this problem for over a year for a seat switch. While it was in he want a complete service on it. He had been taking it to the dealer and some things like the front axle pivot adjustment had never been done. That crud in the fuel filter was not causing in running problems at least using the BH. It probably want to far from causing it to run bad.
Is what’s called the lift pump actually just a fuel pump to draw fuel from a lower area to the injection inlet, since gravity won't work for the whole flow? I have a B7500 that I would like to equip with a better water drain. The new part you installed looks like a good option. I have to say that the B7500 fuel filtering system looks much better than the later models with those filters underneath and no way to drain water out of the fuel.
Yes, you are correct about the lift pump. This filter would be an excellent upgrade for your tractor.
thanks for making the video, this is one upgrade I am going to do!
The fuel filtration is one of the few weak points on the BX. Thanks for watching and commenting.
Thank you, will watch out for those things.
12:57 that's not thread sealant tape, that's teflon tape which is a lubricant. That fitting has National Pipe Thread (NPT) which means the threads are cut in a way that the threads make a liquid tight seal. The teflon tape lubricates it enough that you can engage enough threads to make it seal and does not provide any sealing on it's own. You can see this when you unscrew freshly tightened thread with teflon tape on it and see how smashed and torn the teflon tape is.
Thanks for watching!
thats correct so many think its for sealing , it is not
Do you also remove the filter closest to the engine or do you leave that? Great video
I leave the filter at the engine.
So why not remove the filter at the injection pump too? Just for the added filtration?
Leave it on in case something would happen to the lift pump and debris from that would go through the fuel system,
Does pulling off that rear wheel make access to the hose any easier?
No
are those 3/8 inch barbs in filter?
5/16
@@TractorTech all the r12t filter kits I'm looking at on amazon come with the 3/8 inch barbs, so i need to buy 5/16 inch barbs?
@@mobleyMobley Yes, a good local auto parts store should have them.
@@TractorTech ok thanks
does this replace both inline filters? I have a bx2680.
No
I have a crack in one little portion of my fuel like going from front fuel filter to the block will I have to drain tank?
Just use a pinch off tool on line at the rear of the filter. If you don't have a pinch of tool you can use needle nose vise grips very gently.
GearWrench GearWrench 145 Hose Pinch Off Pliers www.amazon.com/dp/B000O3NACS/ref=cm_sw_r_cp_apa_i_r8gfBbVCPTRA8
Tractor Tech is 5/16ths the same size for BX 2200?
Yes
Tractor Tech thank you :)
Tractor Tech it’s about 1 foot long (the cracked part) is there a way to buy a one foot?
A very useful video, thanks, but please learn how to handle your camera without introducing a ton of unnecessary extraneous detracting noise.
Thanks, the camera is very sensitive to movement. I have changed somethings to reduce the noise. It is a common problem with this camera.
good video as far as information but please please please buy a tripod , your camera work is horrid at best and all that mic noise made it almost unwatchable
The camera was on a tripod. It is a go pro hero 5 black. I is junk. If you move it, it makes that noise. I now have a better camera and a wireless mic.
Let's see your video of how it should be done. I am thankful for his effort and mechanical skills.