Oh my goodness I had watched this video a while back , changed the bulbs myself successfully in September , I had to do it again today and could not for the life of me figure out what I was doing wrong this time when I did it successfully last time and so I came back here to see what I was doing wrong and now I know where I went wrong!!! 😅
It's a dual purpose bulb, Hi and Low beam. As far as the retainer it would probably be a dealer part, or maybe a local junk yard will have one. You don't have to remove the philips screw to get the bulb out just the retainer clip goes to the side. Good luck man hope this helps.
If your doing the passenger side bulb you will bring the retainer up and then push in and over towards the passenger side of the car and it should snap on like in the video.
Thanks, brother, I just trained the entire staff at Advanced Auto "as a customer" with your video here!
Thank you so much for the close up of the metal retainer piece...good video...
Thank you!!! Every time I go to replace these I always forget to put the retaining clip on BEFORE attaching the cord to the bulb. Thank you again!!!
Thank you this looks super easy, shop wanted to charge me 200$
Just changed my bulbs. Thanks for the walk though.
Oh my goodness I had watched this video a while back , changed the bulbs myself successfully in September , I had to do it again today and could not for the life of me figure out what I was doing wrong this time when I did it successfully last time and so I came back here to see what I was doing wrong and now I know where I went wrong!!! 😅
This is the BEST instructional video. Good job with the camera angle.
Glad it was helpful!
Great video made this process really easy thank you.
Great to hear!
You make it look so easy!
I’m out in the cold freezing your heavens sent for this one
Thks for the video it is really helpful
Man ur video is a lifesaver, been fighting with that damn spring for 2 days until I found ur video!
Hey man glad I could help!
Awesome thank you so much for your help
Thank you! I will attempt to change it tomorrow
How did it go, were you able to get it done?
Great video!!! But where’s that fog light bulb replacement?? 🤔🥺😜
Haha It's coming soon I PROMISE!
How do you replace the daytime running lights? There’s no way to get to it is there besides. Pulling the whole headlight frame off?
I’ lost the clamp any idea where I can buy them ? Your doing the high beam right?
It's a dual purpose bulb, Hi and Low beam. As far as the retainer it would probably be a dealer part, or maybe a local junk yard will have one. You don't have to remove the philips screw to get the bulb out just the retainer clip goes to the side. Good luck man hope this helps.
Also maybe something like this if you can't find one locally. amzn.to/3vsplcp
are the low beam and high beam the same ones ?
YES all 4 are the SAME NUMBER
Yup! What he said ^
Seems like I’m always having to replace mine every 6 months
Love your video! Please let me know how to contact you?
I can’t get my driver side retainer to release!
I’m sorry for the late reply Lisa were you able to get it out?
Just cant get it to clamp back ! 😤
Make sure the groove is lined up on the light bulb and then just push in and over
If your doing the passenger side bulb you will bring the retainer up and then push in and over towards the passenger side of the car and it should snap on like in the video.
@@LetsRepair you sir are a God Send
Glad I could help brother good luck!
Thanks