Brilliant I knew the part after watching this to take off cleaned it ! My son had washed a coconut hair mat "don't ask me why " and it clogged all that pipe up. Also he was £1.41 up after it fell out the pipe. I wouldn't be keen on doing it again it was a bloody nightmare to do.
Tried all of that. Fitted a new pump, new water inlet valve, cleaned the outlet and sump hoses. All good. Still get an E18 just before the cycle finishes. The machine fills and empties fine at the start of the program, just never managed to complete the program? Any ideas before it goes in the skip, with some expensive new parts!
Great video. Was able to detach the drain hose from the pump without undoing the pump, and just visible, 5cm inside, was a 5p coin completely blocking the hose! Was just able to reach it with a pair of long nose pliers. Thank you.
Hi, ahh great to hear you have been able to find the blockage and remove it! Hope your washing machine is working great again, and thanks for your comment.
Hi George, if the impellor is stuck and not moving, try to ensure any obstruction to it is removed, if it is clear of obstruction then it sounds like it is a faulty pump, and would need to be replaced.
Thats the emergency drain is for beside the filter.. if you don't have one your only option js to open the filter but have a shit ton of towels ready or if you can put a container under somehow, do that!
@@tiberiusclaudiusnerogermanicis 🤣 that’s what I did, pulled the main drainer hose off and flooded the floor! The only option I had. Got the drill bit out the filter and bobs ya uncle
Brilliant I knew the part after watching this to take off cleaned it ! My son had washed a coconut hair mat "don't ask me why " and it clogged all that pipe up. Also he was £1.41 up after it fell out the pipe. I wouldn't be keen on doing it again it was a bloody nightmare to do.
Thank you,regards from Belgrade,Serbia
Hi, thanks for your comment here. It's nice to heart that you appreciated this video!
Tried all of that. Fitted a new pump, new water inlet valve, cleaned the outlet and sump hoses. All good. Still get an E18 just before the cycle finishes. The machine fills and empties fine at the start of the program, just never managed to complete the program? Any ideas before it goes in the skip, with some expensive new parts!
Great video. Was able to detach the drain hose from the pump without undoing the pump, and just visible, 5cm inside, was a 5p coin completely blocking the hose! Was just able to reach it with a pair of long nose pliers. Thank you.
Hi, ahh great to hear you have been able to find the blockage and remove it! Hope your washing machine is working great again, and thanks for your comment.
What are the symptoms if there’s blockage?
Thank you. Found a stick jamming the impeller, removed it and machine is working 😃
Hi, thanks for your comment. Glad our video was able to help you solve the issue!
Any ideas why i keep getting scrud marks on clothes despite doing hot drum clean cycles?
We have a Bosch washer / dryer but only today the dryer is not drying our clothes could the ventilation hose be blocked ?
Should there be a plastic ball in the sump hose where it connects to the drum? I’m assuming yes
Hie can i order spare parts for indent machine am in Leicester
"make sure the impeller turns freely" ... um, what do i do if it doesn't though? help please!
Hi George, if the impellor is stuck and not moving, try to ensure any obstruction to it is removed, if it is clear of obstruction then it sounds like it is a faulty pump, and would need to be replaced.
Thanks!
Hi, thanks for your comment, hopefully your washing machine no longer has blockage issues!
Thank you
Hi, thanks for your comment. Hopefully our video has helped you to see why your washing machine was having blockage issues.
What about if there’s water in the drum and. Cant open the door? 🤔
Thats the emergency drain is for beside the filter.. if you don't have one your only option js to open the filter but have a shit ton of towels ready or if you can put a container under somehow, do that!
@@tiberiusclaudiusnerogermanicis 🤣 that’s what I did, pulled the main drainer hose off and flooded the floor! The only option I had. Got the drill bit out the filter and bobs ya uncle
Tankyou
Hi Craig, thanks for your comment...hopefully your washing machine is now blockage-free and working great again!
Great video except that awful background noise