In my opinion, I don't recommend installing beta programs since they are unfinished and could potentially cause other problems with the software and the device you're using. So in short words, just use the latest finished programs from Razer which is the Razer Synapse 3 and try your best to stay away from public beta programs and wait till they are finished and are ready to go.
this video just pop up on my yt, i just update my firmware because of this, i dont know why synapse dont make a update or something, but thanks, and i will try this beta version, i believe on this Lmao, i have the Deathadder v3, thank you
I bought the mouse this week and sent it back. Unfortunately it had LOD problems. I'm playing with the Vaxee Outset Wireless again. The Vaxee feels much more direct.
There is no best. It all depends on how fast of an pad you want. If you play games like CS/Val, you most likely want a slow control pad. If you play tracking heavy games look into faster pads.
4:01 obviously you know the impact of that and include a proper disclaimer, but man that's gonna cause some people headaches if they just copy your settings without realizing. I just stick with 800 dpi because I don't want to mess with windows pointer speed and a lot of games don't support sensitivities well at 800+ dpi.
@@sfarsitulumi No one told me that, and I didn't say that. There are a lot of games that suck at supporting sensitivities with 1600 dpi, hence why I said, "don't support sensitivities well at 800+ dpi", and I tend to just stick to 800 dpi because it's way easier when playing more than a couple games like Valorant, Warzone, CS, etc. where it obviously isn't a problem.
does anyone know how to fix stuttering your v3 pro from stuttering anytime you load into a game. I have the polling rate at 500hz and my ingame fps at 240
No way I'm taking advice from someone who rests his fingertips at the rear of the mouse. You're essentially making your claw grip less efficient than even fingertip or palm at that point lmao.
@@teehee8522 yep, I bought a black version of the mouse and it came out of the box with zero issues so I’m returning my white copy. Not every mouse has issues so that obviously why Jaeky has zero idea what I’m talking about but if you were unlucky enough to get a bad copy it’s pretty annoying. You can’t play Low LOD without your mouse constantly freezing for a second every other time you lift the mouse to reset positioning.
upgraded from a 2£ lidl mouse to this such a big difference in terms of hz and input delay and how lighter it is and optical sensor such a big upgrade
I still have a crappy mouse and mousepad, looking to upgrade finally, not sure on the mouse or pad yet.
@@yagami3933 what type of games u play
I had the same upgrade! Felt insane
This video helped a lot thanks! The OG synapse wasn't even detecting my mouse, but the beta version has no issues.
Thank you! I upgrade from an old Glorgious Model D. This mouse feels amazing!
lol I did too
Same just came in the mail today 😂😂
@@mrsebola feels way smoother
It should be amazing it cost me like 8 million dollars
thanks, it helped me with all these features
very helpful! Thank you so much! Hoping this new mouse and these settings will help with my overwatch play. ;)
i have the brother of the razer viper v3 pro the dethadder v3 pro and it helped me too ty for your work
gracias hermano no sabia que la velocidad el curson no afectaba los juegos like por eso
In my opinion, I don't recommend installing beta programs since they are unfinished and could potentially cause other problems with the software and the device you're using. So in short words, just use the latest finished programs from Razer which is the Razer Synapse 3 and try your best to stay away from public beta programs and wait till they are finished and are ready to go.
changing your pointers speed gives you more delay you should keep it a default
bullshit in 99% of games. Games use raw input and that makes sure windows settings have no effect.
Thank you Sir! :)
this video just pop up on my yt, i just update my firmware because of this, i dont know why synapse dont make a update or something, but thanks, and i will try this beta version, i believe on this Lmao, i have the Deathadder v3, thank you
Changing polling rate on the synapse beta doesnt change actual polling rate on the dva3 for me, so i would suggest synapse 3 over the beta
thanks
I bought the mouse this week and sent it back. Unfortunately it had LOD problems. I'm playing with the Vaxee Outset Wireless again. The Vaxee feels much more direct.
Thx bro
what a sigma tysm
thank you
Toca una alta calibración para el correcto funcionamiento de este sensor Viper V3 Pro
what mousepad do you use ? Do you have any mousepad recommendation there's no limit on my budget I just wanted to know the best one for that mouse
@@leooon165hz I use the Artisan Zero Soft XL. I would recommend looking at Artisan mousepads.
There is no best. It all depends on how fast of an pad you want. If you play games like CS/Val, you most likely want a slow control pad. If you play tracking heavy games look into faster pads.
On board memory just saves automatically? So I can just uninstall after I change the settings?
this is holymouse for cs2
What LOD should I use? I want the LOD to be the same as my old gpx1
i have razer viper v3 hyper speed, does anyone know why randomly it blinks green and turns off then stops blinking and turns back on?
So the synapse DOESNT update the mouse firmware on its own? i gotta go to a whole other app? and download other stuff???? wtf lol
4:01 obviously you know the impact of that and include a proper disclaimer, but man that's gonna cause some people headaches if they just copy your settings without realizing. I just stick with 800 dpi because I don't want to mess with windows pointer speed and a lot of games don't support sensitivities well at 800+ dpi.
Who told you games don't support more than 800 DPI? 😂 This is just a straight up lie
@@sfarsitulumi No one told me that, and I didn't say that. There are a lot of games that suck at supporting sensitivities with 1600 dpi, hence why I said, "don't support sensitivities well at 800+ dpi", and I tend to just stick to 800 dpi because it's way easier when playing more than a couple games like Valorant, Warzone, CS, etc. where it obviously isn't a problem.
9 months ago i would said that as well. Having switched now to 1600 DPI i can say that i didnt play any game yet where i really had that problem.
i cant get more than 1000 polling rate in the app idk why
Which Mousepad do u have or use in this Video?
Artisan Zero Soft XL
I have Razer blackshark v2 x wired not usb version should i update my firmware with the usb one?
How do you get 2000 and 4000 polling rate?
You have to buy their hyperpolling rate dongle
You need the hyperpolling dongle or the mouse dock pro.
does anyone know how to fix stuttering your v3 pro from stuttering anytime you load into a game. I have the polling rate at 500hz and my ingame fps at 240
maybe antivirus or any programm running from behind.
Can i do this on xbox series s?
can you explain the tracking distance setting and why not set it at high?
@@blurryface4519 www.reddit.com/r/MouseReview/s/2sP3jAuQxk
In reality it doesn't matter and it doesn't make a difference.
In reality it matters and it does make a difference
on my mpc450 high tracking distance feels better than low or medium , its weird
Should I turn on rawinputbuffer in Valorant ?
@@matthewtrieu7871 Always turn on raw input buffer.
@@Jaeky ye i mean turn it on
i dont see cobra firmware there is cobra pro wich one should i download
Why does bro sound like he has a cold
No way I'm taking advice from someone who rests his fingertips at the rear of the mouse. You're essentially making your claw grip less efficient than even fingertip or palm at that point lmao.
what skates do u use on the mouse?
i want to know it too which one is the best for cloth pads?
@@HXISE well what are u looking for? go for jades obsidian if u want fast ones
what about advanced dynamic sensitivity
@@MouseSpart Don’t use that
Have you had issues with the viper v3 sensor? I’ve read other people having issues with the sensor deadzoning after lifting the mouse.
I never had that issue, and the latest firmware update apparently fixed it for those who were experiencing it.
@@Jaeky No, its still happening in LOW tracking distance
@@mafakabiach8879 That’s weird, I use low and I’m not experiencing it.
Is this real issue?
@@teehee8522 yep, I bought a black version of the mouse and it came out of the box with zero issues so I’m returning my white copy. Not every mouse has issues so that obviously why Jaeky has zero idea what I’m talking about but if you were unlucky enough to get a bad copy it’s pretty annoying. You can’t play Low LOD without your mouse constantly freezing for a second every other time you lift the mouse to reset positioning.
sigmah
Can i play 8k hz without dongel
@@ansalharbi7311 no
How Can I active the RGB?
This mouse does not have RGB.
On Amazon I saw the reviews of people who manage to illuminate the logo, having gotten it from there I thought it could be done
@@ezio9987 You might be thinking of another Razer mouse like the original V1 viper.
cant even connect it w my pc LMFAO wireless isnt working gg
had that issue as well lmao
@@mushiim8 Same no fix either
did we really need a video for basic common sense
thank you