I love the printer! And thank you for taking the time to produce how to videos. Unfortunately, this video no longer lines up with how the printer is packaged and secured for shipping. For example you no longer have to remove the security brackets holding the arm in place. That is now secured by zip ties and dense foam padding. And the base plate is now secured by screws that must be removed before it can slide to provide access to the track and base mounting sockets. I deferred to my manual for assembly as it was up to date and accurate. Please do an update to this video. Other than that, the printer is spectacular.
@@DRIZZY-FR It comes with a small sample amount. Might be enough to print a first recommend print which is usually the Benchy Boat. Other than that you will need to buy more spools.
Other videos show red colored screws (I think they were there to hold the build plate from moving during transport) that are to be removed before placing the base down? I watched your video and didn't even look before I screwed the base down. Do I need to remove the base to get to these screws or are the newer ones shipped without the red screws?
Fantastic printer!! I wish to ask, some people I see have a cover for the cross nub at the back next to power and bed cable, has this been removed on newer versions?
Is there an updated guide? Mine just came and it was packaged very difference. Let me go look online because my bed does not slide at all, guessing its screwed down somehow.
Just received the A1 combo. The packaging was totally different. 😅 Just noticed the swatches I also ordered seperately. It wasn't in the 'whats in the box section' Now double the swatches. Ah well.
what is the difference in the packaging ? this has like white foam and looks packaged diff than the black foam i got and placement? is this white packaging one the newer one or older version?
There is no info that u should take away the two black plastic security holders on the frame. I found out by watching a youtuber that also dident know and learned the hardway. Super super bad.
@M4XC4V413R4 good for you. When I pulled the plastic like in the video, the cardboard box was being lifted as well. Had to get someone to hold the cardboard box down, so that I can pull the plastic out
What a terrible company. They have no respect for their customers. I just bought my first Bambu printer. I had a minor order problem (I accidentally chose P1S instead of the P1S/AMS combo). Since the AMS is $100 cheaper with the printer, I asked for a discount code to match that price. They recommend I ship the printer back instead of discounting the AMS to the same price when you buy the combo, but the kicker is I have to pay for the shipping both ways. I've only had the printer for one day when I asked them to help me purchase the AMS. They could care less once the sale is complete. ZERO Customer Service! I will never do business with them again.
Oh, what a terrible mistake you made. Always check thrice when buying something. I can see why they wouldn't send you a AMS lite discounted, they are bundled and seperate units, you made the mistake, not them.
I love the printer! And thank you for taking the time to produce how to videos. Unfortunately, this video no longer lines up with how the printer is packaged and secured for shipping. For example you no longer have to remove the security brackets holding the arm in place. That is now secured by zip ties and dense foam padding. And the base plate is now secured by screws that must be removed before it can slide to provide access to the track and base mounting sockets. I deferred to my manual for assembly as it was up to date and accurate. Please do an update to this video. Other than that, the printer is spectacular.
Very helpful and easy!
Please update the video for the new packaging of the A1 :) I was really confused :p
I Love my A1 🎉
Me too it’s fantastic
Does it come with filament?
@@DRIZZY-FR It comes with a small sample amount. Might be enough to print a first recommend print which is usually the Benchy Boat. Other than that you will need to buy more spools.
Just got my printer. Super stoked.
Other videos show red colored screws (I think they were there to hold the build plate from moving during transport) that are to be removed before placing the base down? I watched your video and didn't even look before I screwed the base down. Do I need to remove the base to get to these screws or are the newer ones shipped without the red screws?
Bambu. Like. what a stunning unboxxing!:)
Fantastic printer!!
I wish to ask, some people I see have a cover for the cross nub at the back next to power and bed cable, has this been removed on newer versions?
Receiving it tomorrow :-)
hi. I just bought my a1 combo and I noticed there are 2 ams lite ports. does this mean I can use 2 ams lite on one printer?
Is there an updated guide? Mine just came and it was packaged very difference. Let me go look online because my bed does not slide at all, guessing its screwed down somehow.
Did you figure this out? haha
@@melissapacheco7574 Yea the online guide is updated.. just strange that the video shows just one of the two ways it may come packaged.
Just received the A1 combo. The packaging was totally different. 😅 Just noticed the swatches I also ordered seperately. It wasn't in the 'whats in the box section' Now double the swatches. Ah well.
mine its different too
what is the difference in the packaging ? this has like white foam and looks packaged diff than the black foam i got and placement? is this white packaging one the newer one or older version?
So the a1 combo comes with tge part that hold 4 spools of pla?
Is the Filament Swatches included in the Bambu A1 Combo..??
They are :)
Juste pourquoi maintenant, alors que c'est une machine qui est sortie depuis un long moment 🤔
Maybe cuz several people f*cked up the unboxing and broke their printers 😂
Je crois q'elle n'est pas si vielle
5:38 what’s that cable?
Well it's for your ams.
Could’ve used this last year when I got mine! Lol.
got my A1 yesterday just a piece of plastic broke but still works perfectly
Print a replacement!
My A1 mini keeps failing and keeps making prints. Stick off the bed when the plate is washed so I’m gonna get A1 soon.
This is not an accurate unboxing, I just purchased mine and unboxed it and it was still the old way
finding the same today.
Step 1: pull out of box. That was a proper pain in the ass :D
There is no info that u should take away the two black plastic security holders on the frame. I found out by watching a youtuber that also dident know and learned the hardway. Super super bad.
Unboxing my A1 combo and this video seems out of date. Packaging is different, mount brackets on the machine are different… ohh well.
man i wis i had one
You are a bit late for this😂😂😂!
Don't buy a 3D printer from them. They lie about the stock on their website. deadlines are not met
dont give this company any money. ive been waiting over 3 weeks for my order.
note, this can be packaged two completely different ways, mine was this way, today. ruclips.net/video/Lb-0C0a3j4g/видео.html
Bambulab I hate youuuu! It was super difficult to get the plastic out of the box. Goddamit! Definitely cannot unbox this thing by yourself
No problem here
@M4XC4V413R4 good for you. When I pulled the plastic like in the video, the cardboard box was being lifted as well. Had to get someone to hold the cardboard box down, so that I can pull the plastic out
@raiz1999 so you're a failure... Not sure how that's their problem. Literally millions of printers sold and people managed it.
can i have one for free because yes?
What a terrible company. They have no respect for their customers. I just bought my first Bambu printer. I had a minor order problem (I accidentally chose P1S instead of the P1S/AMS combo). Since the AMS is $100 cheaper with the printer, I asked for a discount code to match that price. They recommend I ship the printer back instead of discounting the AMS to the same price when you buy the combo, but the kicker is I have to pay for the shipping both ways. I've only had the printer for one day when I asked them to help me purchase the AMS. They could care less once the sale is complete. ZERO Customer Service! I will never do business with them again.
Oh, what a terrible mistake you made. Always check thrice when buying something.
I can see why they wouldn't send you a AMS lite discounted, they are bundled and seperate units, you made the mistake, not them.
that sounds like a you problem, as in completely created by you.