@programmerplace it wasnt not only lift but also fly high. The reason, I uploaded this video was to see the problem, that is, that it needs full throttle to lift and fly.
yes, with many modification. Why? because 720 has low torque to bring baro and gps. We need more for the motors. 820 or 8250 still not be able to do that. One of the solution is to integrate the module into one module / PCB (as in conventional drone does).
@@ArduJimmyyeah how can we do that I am thinking of using stm32 which has all the features and I can setup using inav but I am not able to figure out which type of esc I should use like to select on the software for controlling motors
Love it. MultiWii is how I started out building drones. I even had the same controller.
you're right. Actually multiwii has many features. It depends on the budget 👍
Firstly I saw it, you held the drone stick. Looks fake. When i saw your videos, wow. Inspiring. 👍
Install the wing backwards, please.
what do you mean by "installing the wing backwards"? Sorry, I don't understand what you mean.
By backward he probably meant connect them backward like cw on ccw motor so it will not lift and you don't have to hold it
@programmerplace it wasnt not only lift but also fly high. The reason, I uploaded this video was to see the problem, that is, that it needs full throttle to lift and fly.
Can I control a motor using irlz44n mosfet using esp32 .like esp32 runs on 3.3 volt so can it run a motor connected with irlz44n mosfet
yes you can, irlz44n is compatible to be used in stm32, esp32 or esp8266.
Can we add barometer and gps in it
yes, with many modification. Why? because 720 has low torque to bring baro and gps. We need more for the motors. 820 or 8250 still not be able to do that. One of the solution is to integrate the module into one module / PCB (as in conventional drone does).
@@ArduJimmyyeah how can we do that I am thinking of using stm32 which has all the features and I can setup using inav but I am not able to figure out which type of esc I should use like to select on the software for controlling motors
I wanted to make it more stable and control using mobile long range with mini fpv ant suggestions
I'll do it for future project since I have no enough budget to do that :)
Change tha motors
no. solution is in thw description. by the way, calibrating should be performed for brushless esc/motor
modifying min throttle and max throttle or calibrating the esc/motor if it is a brushless