I want to take a second to say thank you for all the flysky stuff info that you put out like this, no one else is really doing this and flysky is my jam! Thanks for the education bro!
I just bought a Tinyhawk as a RTF bundle and I'm excited to learn. I've also been practicing with a sim using a Flysky controller. I thought when I read the description on the website that it already syncs with Flysky controllers, but after looking again, it clearly said FRsky. Darn! This soldering is beyond my skill level right now, but eventually I'll muster up the courage to tinker around with it once I learn how to fly.
You are about the only person who uses Flysky of the more known YT channels. The fs i6s was the first one I got and i've done some pretty good mods to it. 2x external antenna with 2000mw booster and li-po bat mod with usb charging. I've never seen this Rx, I use the flit 10 for my beta 75x its tiny but no rssi.
I used the SBUS pad and set the FS i6X transmitter to SBUS mode in the transmitter rx setup as well and that did work for me (same board but on TH 2 Freestyle). Just enabled serial receiver on UART 1, changed receiver to Serial and SBUS and it worked okay.
Thank you 😄 very useful 👍 the 5v next to the bind button on the board gives me 2v I welded on the other side of the board for the + - next to the capacitor
This video is exactly what I was looking for, thank you. Had a quick question. The only Tiny Hawk S I can find on Amazon are frsky models. Can I still use these Tiny Hawks and just solder on my own receiver? Or does it have to be a Tiny Hawk with no RX for me to solder on my own?
Yes, you can buy the Frsky version and add this receiver to it.(ultimately you will be flying with 2 receivers but only one active). The version he is demonstrating on has a receiver attached already. I added a fs-rx2a to a Frsky receiver model to use with a Flysky controller.
@@KJ-bv6uk if i add 1frsky receiver to a tinyhawk 2 with already own frsky rx should i do something to disable the own receiver or just unsolder the antenna is fine?
Great tutorial.. But I have an answare: red for positive brown negative and yellow for signal right? The yellow in to the receiver is weld on ibus. Red and brown positive and negative from the ibus port on flight controller and yellow on TX in? Not ibus? I'm sorry but I'm Italian and my English isn't the better! Thanks a lot for all!
İ wonder i thinking to buy beta fpv drone but i have flysky i6x do i need to buy frsky controller is there any cheap way to bind it will be helpfull for me :)
Hi Adam. How's it going? After following the configurations. my throttle up and down is not working. Yaw left and Yaw Right works. Pitch and Roll works too. It's just the throttle up and down that is not working. Please advice. Thanks
I keep trying to refer to this video because it's the closest I have been able to get to anything helpful, but I am still frustrated as all get out. I have an X6B receiver.. you have a good video on binding it and you have another video showing how to connect two of its wires to connect to another style drone, but what I could really use help with is which wires to solder directly onto a tinyhawk freestyle, which is very similar to to the S you have here. I can bind it to my controller just fine, but I think I have the wires in the wrong areas.. any chance you might be able to help with this? I don't know which wires are the positive and negative. I know the black one is the ground. Other than that, there doesn't appear to be anything that tells me what the other 2 wires are
Hi! So, your able to connect it to the Freestyle's board but not able to control it? Have you tried switching the Output Mode on your transmitter and receiver settings in betaflight?
@@RCwithAdam1 Hi Adam thanks for the reply. Im running a tyro79 with a fli14+ reciever, i even change it over to a flysky ia6b reciever & is the same 50% on my osd. When i use my eachine trashcan with a fli14+ receiver it show 99% on my osd. I got no idea. Perhap is just the flight controller. Well thanks you for your reply.
@@RCwithAdam1Help ! i installed the fli14+ uart 1 serial rx on, serial based ... and ibus , map AETR1234 , bind blinking , binded steady red , get rssi value on radio but nothing on the drone how can it be ????? nothing in the receiver tab BF
@@RCwithAdam1 i only used the visuals from this video didn't hear that was wrong , now got the good pad beside the bind button and it works. made a HOw To video my own ruclips.net/video/GRv0ZKPlTyU/видео.html
Thanks alot for your videos about flysky! I'm just a little concerned about the wiring on the board. I got a fs-rx2a Pro v1 receiver. I took the brown cable (ppm which I don't need?) off. Now I got yellow (i/sbus signal), red (+, 5v) and black (-). Your video says I should solder the black one (-) left next to rx1. But on my board is 5v printed. And the red cable should be soldered to led on my board. Is my board different?
Hi! Sorry for the delayed response! You can email photos to rcwithadam "at" gmail "dot" com , and I'd be happy to help! Otherwise, wherever you can find on the board, you just need to connect the positve wire to a 5v pad, negative to ground, and the signal wire to RX1.
I asked in a facebook group, the labeling is a little bit bad. That's what I did. But the receiver seems DOA, it isn't acting at all. Have to try it on another board.
The fli14+ is actually too big because of the connector. I got it and tried to fit it. I ended up having to cut off the connector on the reciver and had to press it between the fc and the battery holder. I think this is suboptimal because it ruins the soft mount.
Very insightful!!! I just bought a frsky x-lite s and i cant use the rx that comes with the tinyhawk s. I was thinking about buying a xm+, flashing it with the access protocol and installing it in the tinyhawk s. You think its possible??? I would love an answer, thanx and keep up the great work!!! 👍👍👍
Hey Adam, i just wanted to ask if this works with the tinyhawk 2 race because i bought the flysky fs-i6x (from one of your vids) and i want to see if this works.
does this method also work with a emax tinyhawk freestyle? Another question: it is better if I buy a sibus receiver and solder it to the sbus pads or a ibus receiver and solder it as you did in the video? Thanks
Hii and thank you for share informations. I can t decide what to buy this or fli14+ I am interest in range. Want to use it in ldark et 115 v1 My favorite is FS-I6b but I believe is to big. So will fit the FS-i6b ??? is FS-RX@a Pro better than FSA*S ??
Hey Adam! I've done this on my freestyle with an RX2A pro v1- basically same receiver, just with ports. Mine will not bind. At all. Any tips on getting me up and flying again?
Albert Quiroz Hey Albert, no matter what I tried I couldn't. It sucks, keep on trying but I just ended up buying the RX2A pro. I guess they got a quality control issue with the V1s.
Besides flying a Traxxas Alias which comes with its one controller. What controller/radio can I just buy that would pair with the TinyHawkS? Local hobby store informed me that you need a specific controller for each drone. I have no idea how this all works. Would love some help!
And to answer your question more generally; each aircraft has to have it's own receiver, and each receiver has to be the same brand (or really, the same "protocol") as the radio. So, you can fly many aircraft with one radio, but the radio and receiver must match. Let me know if you have any other questions!
Ok awesome! I will go with a FrSky then. Do you have any opinions on the FrSky X Lite? It looks like an Xbox controller which to me seems like it would be more comfortable in the hands than the more common “square” style controllers I see people using online.
And as far as goggles I was looking at the Fatshark Recon V3 for 90$. I’m assuming for 90$ they would work fine with the FrSky/TinyHawk setup? Or will I be wanting something a little better?
@@900Redshark I don't know a whole lot about specific differences in FRsky radios, but if I were to get one, it would be the X-lite. The X-lite is made for people who like to use their thumbs (like an xbox controller), as opposed to "pinching" the sticks.
Hi! Make sure the rx is in ibus mode by pressing and holding the bind button (here's the manual img.banggood.com/file/products/20161010005835FS-A8S%20User%20manual%2020160929%20.pdf).
@@RCwithAdam1 hey i actually figured it out! Between your video and another, i got it working and learned alot too actually. I just have to troubleshoot! Lol its hopping and bouncing off the ground now.
I am trying this with my mobula 7. The receiver and transmitter are bound but I’m not seeing any transmitter. If I change the settings to SBUS I can see the transmitter but no inputs. It’s a crazybee f3 flight controller. Any help would be appreciated:) btw I set up the flysky i6x transmitter just like you did so I am a little bit stumped.
Hi! If you can take a clear picture of the electronics and email it to me at RCwithAdam@gmail.com I will help you get in the air! Which rx are you using?
@@RCwithAdam1 Thanks for the quick response. As far as I can tell by looking at the board and the schematic that came with the drone there is only one RX. RX three is supposed to be un inverted. I am sending you pictures now.
Hello, I took the receiver fli14 +, I soldered the 3 cable as on the video (only 3). when I connect the receiver to the radio with the button bind the radio finds it but the light on the receiver is red. the problem is in betaflight in "receiver" the drone does not beep andthe orders do not react. you have an idea? thank you
You may do this without separate the FC. Just remove the botton plate and there is: RX1 (or RX2), ground from the battery and +5 from the 5v above the DSMX pads. I say this, cose in the TH 2, the motors cant be unplugged, sou you cant flip the FC.
@@RCwithAdam1 nah, it was the flysky a8s micro rx I believe, tried it both ways, sbus pads and it smoked. Funny story, I removed everything back to stalk, it flew about 2 mins and vtx started to flicker. I assume it was some left over solder Flux that could have caused a short during flight? 🤦♂️🤷♂️ all good man, my rookie mistake I'm assuming. Just waiting for a back order tinyhawk II Freestyle. Cheers, happy flying 👍
I want to take a second to say thank you for all the flysky stuff info that you put out like this, no one else is really doing this and flysky is my jam! Thanks for the education bro!
Hey! You are so welcome! Glad to do it!
Hay can u by any chance help me I have flysky i6s and just got a hawk5 can't get it going any ideas
@@RCwithAdam1 just got hawk 5 trying get going with i6s no one has info on it . million videos of the hawk5 but none show anything with flysky ..
@@dopefpv389 you do know that you're going to need a FlySky receiver for that quadcopter correct?
@@SteadfastRC I got it also can't get it going though ..
After 9 gruelling hours of troubleshooting, God used your video to help me fix my tinywhoop ii race, Thank you, you have gained a new subscriber!
You're one flysky guru!Best of the best...thanks for all the flysky video tutorial!Greetings from Malaysia.Take care n stay safe!
I appreciate that!
I just bought a Tinyhawk as a RTF bundle and I'm excited to learn. I've also been practicing with a sim using a Flysky controller. I thought when I read the description on the website that it already syncs with Flysky controllers, but after looking again, it clearly said FRsky. Darn! This soldering is beyond my skill level right now, but eventually I'll muster up the courage to tinker around with it once I learn how to fly.
You are about the only person who uses Flysky of the more known YT channels. The fs i6s was the first one I got and i've done some pretty good mods to it. 2x external antenna with 2000mw booster and li-po bat mod with usb charging. I've never seen this Rx, I use the flit 10 for my beta 75x its tiny but no rssi.
THANK YOU SOOO MUCH!!!!! This answered absolutely every question I had.
Just ordered a Tinyhawk Freestyle and I think it has the same board? I plan on adding a Flysky receiver so this is super helpful, thank you!
Do you think i should do the same thing in the video for a tinyhawlk freestyle.
I used the SBUS pad and set the FS i6X transmitter to SBUS mode in the transmitter rx setup as well and that did work for me (same board but on TH 2 Freestyle). Just enabled serial receiver on UART 1, changed receiver to Serial and SBUS and it worked okay.
This worked perfectly for me! Thank you! I just did this to my original Tinyhawk and the FS-I6X. And of course its raining....lol
Great!
Lol 🌧
Would this work on the new tinyhawk 2 freestyle?
did work, but the FSi6-X i have keeps beeping with a low rssi warning, but the quad fly's fine
Awesome I just wired mine up and used your video to get it up and flying ! Thank you!!!
Thank you very much for this useful sharing, Adam. Have a great weekend and best wishes for you 🙏🙏👍🤘🍺🍺❤️
Thanks, i was just in the stream I'm still waiting for my stuff its supposed to come in a few days lets hope it all works!
I hope so too! 👍
Thank you
😄
very useful
👍
the 5v next to the bind button on the board gives me 2v
I welded on the other side of the board for the + - next to the capacitor
Hey Adam, my reciever LED doesnt light up... what could be the problem? I connected it to the board like you show in second 1:13
This video is exactly what I was looking for, thank you. Had a quick question. The only Tiny Hawk S I can find on Amazon are frsky models. Can I still use these Tiny Hawks and just solder on my own receiver? Or does it have to be a Tiny Hawk with no RX for me to solder on my own?
Yes, you can buy the Frsky version and add this receiver to it.(ultimately you will be flying with 2 receivers but only one active). The version he is demonstrating on has a receiver attached already. I added a fs-rx2a to a Frsky receiver model to use with a Flysky controller.
@@KJ-bv6uk if i add 1frsky receiver to a tinyhawk 2 with already own frsky rx should i do something to disable the own receiver or just unsolder the antenna is fine?
Trying to set up my Mobula 7 only ever used a e6 controller
yo help please everything works great but on beta flight my aux10 seems to be stuck at 2000 and when i throttle it up it gets stuck
Hey! How can i connect sbus to the board
Hi does this work on tinyhawk freestyle 2?
Great tutorial.. But I have an answare: red for positive brown negative and yellow for signal right? The yellow in to the receiver is weld on ibus.
Red and brown positive and negative from the ibus port on flight controller and yellow on TX in? Not ibus?
I'm sorry but I'm Italian and my English isn't the better!
Thanks a lot for all!
Is there by any chance you make another vid about fs x6b paired with emax tinyhawk 2?
İ wonder i thinking to buy beta fpv drone but i have flysky i6x do i need to buy frsky controller is there any cheap way to bind it will be helpfull for me :)
Hi Adam. How's it going? After following the configurations. my throttle up and down is not working. Yaw left and Yaw Right works. Pitch and Roll works too. It's just the throttle up and down that is not working. Please advice. Thanks
man i did all this but throttle is weird and glithcy can you help me ?
I keep trying to refer to this video because it's the closest I have been able to get to anything helpful, but I am still frustrated as all get out. I have an X6B receiver.. you have a good video on binding it and you have another video showing how to connect two of its wires to connect to another style drone, but what I could really use help with is which wires to solder directly onto a tinyhawk freestyle, which is very similar to to the S you have here. I can bind it to my controller just fine, but I think I have the wires in the wrong areas.. any chance you might be able to help with this? I don't know which wires are the positive and negative. I know the black one is the ground. Other than that, there doesn't appear to be anything that tells me what the other 2 wires are
Hi! So, your able to connect it to the Freestyle's board but not able to control it? Have you tried switching the Output Mode on your transmitter and receiver settings in betaflight?
You can send me a photo of the board and receiver ( rcwithadam@gmail.com ), and I might be able to help you better.
My tx does that, it say still binding but it’s already active .. idk why 😒
I also think the first way you put your wires would work if you enter this into Cli: set rxserial_inverted = on and then save.
My rssi value reads 50% is that normal
Hi! No, usually if it reads 50%, it doesn't actually work and is just stuck showing 50%. I'm not sure exactly why this is. What is your setup?
@@RCwithAdam1
Hi Adam thanks for the reply. Im running a tyro79 with a fli14+ reciever, i even change it over to a flysky ia6b reciever & is the same 50% on my osd. When i use my eachine trashcan with a fli14+ receiver it show 99% on my osd. I got no idea. Perhap is just the flight controller.
Well thanks you for your reply.
this is also possible for the freestyle version ( i believe same board ?)
grz
It should be exactly the same
@@RCwithAdam1Help ! i installed the fli14+ uart 1 serial rx on, serial based ... and ibus , map AETR1234 , bind blinking , binded steady red , get rssi value on radio but nothing on the drone how can it be ????? nothing in the receiver tab BF
@@playmatee1 Hmmm... It's worth a shot to try changing the BF rx setting to Sbus. I'll keep thinking on it.
@@RCwithAdam1 i only used the visuals from this video didn't hear that was wrong , now got the good pad beside the bind button and it works.
made a HOw To video my own ruclips.net/video/GRv0ZKPlTyU/видео.html
Would this work w the tinyhawk 2 also?
yup. Just do this. But dont try to flip de FC. Use the +5 pad (above the DSMX pads), the ground from the battery and the RX1
@@totyrain cant i use the sbus pads?
@@KaizenMontage don´t know. I run flysky, so i didnt try it
Thanks alot for your videos about flysky! I'm just a little concerned about the wiring on the board. I got a fs-rx2a Pro v1 receiver. I took the brown cable (ppm which I don't need?) off. Now I got yellow (i/sbus signal), red (+, 5v) and black (-). Your video says I should solder the black one (-) left next to rx1. But on my board is 5v printed. And the red cable should be soldered to led on my board. Is my board different?
To bad I can't upload photos here. You need a Facebook group 😉
At 1:11 your 5v is led on my board and your negative (-) is 5v on my board.
Hi! Sorry for the delayed response! You can email photos to rcwithadam "at" gmail "dot" com , and I'd be happy to help! Otherwise, wherever you can find on the board, you just need to connect the positve wire to a 5v pad, negative to ground, and the signal wire to RX1.
I asked in a facebook group, the labeling is a little bit bad.
That's what I did. But the receiver seems DOA, it isn't acting at all. Have to try it on another board.
Got it to work! Just took the sbus pads + rx1.
The fli14+ is actually too big because of the connector. I got it and tried to fit it. I ended up having to cut off the connector on the reciver and had to press it between the fc and the battery holder. I think this is suboptimal because it ruins the soft mount.
Me beeping with you beeping was hilarious XD
lol
Very insightful!!! I just bought a frsky x-lite s and i cant use the rx that comes with the tinyhawk s. I was thinking about buying a xm+, flashing it with the access protocol and installing it in the tinyhawk s. You think its possible??? I would love an answer, thanx and keep up the great work!!! 👍👍👍
I'm sure you could install it, but I don't know much about the FrSky protocols.
Thanx though, have a nice one bro!!!!
It worked! Haha thank you
My transmitter will not connect no matte what i try any suggestions
Which receiver and transmitter are you using? Does the receiver led light up?
is it the same for the Tinyhawk 2?
Hey did you ever figure out how to make flysky work on the tiny hawk 2?
Can I remove the stock antenna after installing my flysky receiver?
Hi! Yes!
@@RCwithAdam1 thanks
Hey Adam, i just wanted to ask if this works with the tinyhawk 2 race because i bought the flysky fs-i6x (from one of your vids) and i want to see if this works.
Hi! I don't have the Race model so I can't say for sure.
@@RCwithAdam1 ok thank you. i liked the video
does this method also work with a emax tinyhawk freestyle? Another question: it is better if I buy a sibus receiver and solder it to the sbus pads or a ibus receiver and solder it as you did in the video? Thanks
Hii and thank you for share informations.
I can t decide what to buy this or fli14+ I am interest in range. Want to use it in ldark et 115 v1
My favorite is FS-I6b but I believe is to big.
So will fit the FS-i6b ???
is FS-RX@a Pro better than FSA*S ??
Would it work with a flit10 receiver?
It should! 👍
Hey Adam! I've done this on my freestyle with an RX2A pro v1- basically same receiver, just with ports. Mine will not bind. At all. Any tips on getting me up and flying again?
Did you ever get it fixed? I'm having the same issue
Albert Quiroz Hey Albert, no matter what I tried I couldn't. It sucks, keep on trying but I just ended up buying the RX2A pro. I guess they got a quality control issue with the V1s.
@@fitchyyboi damn dude that sucks, I might have to do the same thing
Albert Quiroz It really does. Do you by any chance have a non-stock VTX? I don't and there's a chance it could be that if you do too?
@@fitchyyboi no it's the stock vtx right out of the box, still cant figure it out. It's really pissing me off lol
is tinyhawk 2 also work with this？
Hi! I don't have one on hand to check, but I believe it's the same board and will work in the same way.
@@RCwithAdam1 oh ok, i will get it and try
the tinyhawk2 also can function with this mod，thanks for your video
Besides flying a Traxxas Alias which comes with its one controller. What controller/radio can I just buy that would pair with the TinyHawkS? Local hobby store informed me that you need a specific controller for each drone. I have no idea how this all works. Would love some help!
Hi! So, for the tinyhawkS you will need a FRsky brand radio.
And to answer your question more generally; each aircraft has to have it's own receiver, and each receiver has to be the same brand (or really, the same "protocol") as the radio. So, you can fly many aircraft with one radio, but the radio and receiver must match. Let me know if you have any other questions!
Ok awesome! I will go with a FrSky then. Do you have any opinions on the FrSky X Lite? It looks like an Xbox controller which to me seems like it would be more comfortable in the hands than the more common “square” style controllers I see people using online.
And as far as goggles I was looking at the Fatshark Recon V3 for 90$. I’m assuming for 90$ they would work fine with the FrSky/TinyHawk setup? Or will I be wanting something a little better?
@@900Redshark I don't know a whole lot about specific differences in FRsky radios, but if I were to get one, it would be the X-lite. The X-lite is made for people who like to use their thumbs (like an xbox controller), as opposed to "pinching" the sticks.
Hey does this work with the fs-a8s v2 receiver? I thought I soldered all the right wires but it still won't bind
Hi! Make sure the rx is in ibus mode by pressing and holding the bind button (here's the manual img.banggood.com/file/products/20161010005835FS-A8S%20User%20manual%2020160929%20.pdf).
Thank you so much. I got it to bind after switching it to ibus!! Really fun to fly!
i have the Rx with the micro plug and it has 4 wires, any help? im really new to this lol
Hi! What is the name of the rx you have?
@@RCwithAdam1 hey i actually figured it out! Between your video and another, i got it working and learned alot too actually. I just have to troubleshoot! Lol its hopping and bouncing off the ground now.
I am trying this with my mobula 7. The receiver and transmitter are bound but I’m not seeing any transmitter. If I change the settings to SBUS I can see the transmitter but no inputs. It’s a crazybee f3 flight controller. Any help would be appreciated:) btw I set up the flysky i6x transmitter just like you did so I am a little bit stumped.
Hi! If you can take a clear picture of the electronics and email it to me at RCwithAdam@gmail.com I will help you get in the air! Which rx are you using?
@@RCwithAdam1 Thanks for the quick response. As far as I can tell by looking at the board and the schematic that came with the drone there is only one RX. RX three is supposed to be un inverted. I am sending you pictures now.
Hello, I took the receiver fli14 +, I soldered the 3 cable as on the video (only 3). when I connect the receiver to the radio with the button bind the radio finds it but the light on the receiver is red. the problem is in betaflight in "receiver" the drone does not beep andthe orders do not react.
you have an idea?
thank you
Hi! Hmmm... Is the "receiver settings" box in betaflight set to ibus?
@@RCwithAdam1 Did you solve this issue. Im just about to order the fli14+ receiver.
Sbus is inverted
The X6B, IA6, and RX2A Pro support RSSI OSD output from flight controller via a firmware update.
github.com/Cleric-K/FlySkyRxFirmwareRssiMod
You may do this without separate the FC. Just remove the botton plate and there is: RX1 (or RX2), ground from the battery and +5 from the 5v above the DSMX pads.
I say this, cose in the TH 2, the motors cant be unplugged, sou you cant flip the FC.
Thank you for the info!! 👍🙂
I copied this exactly and my board started smoking...
oh no! Dang I'm sorry to hear that. And you have the same version of tinyhawk and receiver?
@@RCwithAdam1 nah, it was the flysky a8s micro rx I believe, tried it both ways, sbus pads and it smoked. Funny story, I removed everything back to stalk, it flew about 2 mins and vtx started to flicker. I assume it was some left over solder Flux that could have caused a short during flight? 🤦♂️🤷♂️ all good man, my rookie mistake I'm assuming. Just waiting for a back order tinyhawk II Freestyle. Cheers, happy flying 👍
hello, can you tell me how to do this?
github.com/nepeee/TinyHawkFlyskyRx
would greatly appreciate his... i have the tiny hawk original version