Thank you for the informative video. My Brother SE 600 being delivered this afternoon. I'm an experienced sewist, but haven't purchased a machine in 40+ years. Looking forward to all the new modern features, especially the automatic threading. Great job on your videos, cycling thru watching all of them. 😍😎
my mom owns Baby Locks and apparently they're the best you can buy, but hers always broke the needle, the needle fell out, etc. So watching your videos, I decided on buying the Brother SE600 (mom said that Brother is the cheaper Baby Lock?) and I'm paranoid to embroider with it because of the issues with the Baby Lock machines lol. I was sewing a little bit with it which of course works just fine. I've also been looking into Masterworks 3 but holy crap is that an expensive program!
The brothers machines are really economical when getting started. I have never used baby locks so I don’t have an opinion. Having my machine for over a year and a half now i have only broken 2 needles. Both broke when I was a beginner and I was trying to do things that the machine wasn’t made to do. A needle break is probably inevitable as they get old but the se600 is a solid machine and will last from my experience. You can’t go wrong.
I appreciate it 💯 I like it hands down u did a Very good job on this it turnt out very good I’m happy and I will be doing more business with u soon thanks
Do you have any videos for using repositional hoops for the SE600. This machine is limited to 4x4 and if you want to do a 5x7 youll need software to edit your design, right?
i have a lb5000, so im just beginning to explore my embroidery possibilites, your videos are very helpful thank you!! not sure if you mentioned it but what brand thread do you use to embrioder?
I'm looking into getting this to replace my older sewing machine that finally kicked the bucket. I do a lot of plushie work as well as general sewing and having something that can do embroidering would def help with the whole plushie works, for doing eyes and what not. My only issue is I cant find much information on the software to make your own patterns outside people in the amizon reviews saying its like $1k+ or whatnot? Or that you can only buy patterns from the website? I seen some videos on PE-Design 10 but its been discontinued and I haven't found any sort of info on what is used now. This so far is the only machine in my budget that also does embroidering but if what's needed to make my own patterns for my plushies (so I can stop using plastic eyes) is going to be a pain. I may have to go for something else, or a basic sewing machine. So any info on this? What is needed?
Also what digitizer software do you use? I’ve been having issues with my design coming out not so crispy. Not sure why I tried adjusting the tension but it didn’t help much.
Just received my machine. Do you have to make a path first in order to do the embroidery?? I thought you could just put your shirt under the presser foot in order to do the design.
Hi, when I am trying to put my own design into the machine it says the size is to big, so I fix the size but now its to small like a small dot. my original design is made in illustrator, how can do the right size? and where can I fix that or how? is that possible I can send you the design and can you fix the size?
So I’m new to embroidering and have broken 3 needles and it keeps nesting on the bottom. I’ve messed with the tension and have used different colors bobbin and top tread so I can see what It’s doing but once I put in the design I need it starts to nest and then my needle breaks. Is it the design? How do I fix my issue? (Using Se600)
Jennifer Barrios 1. You might not have the embroidery foot in. Do you have the sewing foot on or the embroidery foot (hoop looking thing)? 2. Do you have the embroidery base on that turns your machine from sewing time embroidering? 3. If you have on the right foot and right bad that transforms your machine the needle shouldn’t brake. The nesting is most likely caused because you don’t have your marching threaded correctly. I have a video on that.
Okay I’ll try that video, I thought maybe it was tension issue. But I have the embroidery base part on and the embroidery foot on. I threaded it like I do for regular sewing. I’ll check out the other video and see if maybe it’s that.
Jennifer Barrios it is the tension. It’s the tension wheels on the inside of the machine. You don’t have to adjust the tension manually. You have to thread the machine right. Release the tension on the wheels by raising up the lever. Thread it then put the lever down (which puts the tension back on) use the thing on the side to put the thread in the needle then out the lever back up and prepare to embroider. The lever applies and takes off tension on the wheels inside the machine thread it while the tension is on and get bird nesting.
Do you have a video how to download designs to the usb stick for dummies, because I can't understand how to do it? I have tried to for weeks and no luck.
joann jumper you might not be having any luck because your designs are not in the correct format. If you need .pes files to practice with go to my website. I have a bunch of them iou can download for $1 each. Or you can purchase a preloaded memory stick with over 30 designs already on it from my website. www.allanawade.com
what program do you use to make your embroidery designs? I can't even spell love on mine lmao It's discouraging having a machine you can't figure out how to use. Thank you in advance
Hi, I in the research phase of my Tshirt/hoodie business and was wondering if you recommended embroidery or HTV. I know HTV is probably easier but I’m not trying to take shortcuts and really want to invest in my business. Any thoughts
Thank you, I appreciate you trying to use the link. I use Chroma Luxe now. It’s a far better software in my opinion that’s why i switched. If you wanna look into it here is my affiliate link for that. R icoma SHOP link shop.ricoma.com?referral=allan-wade
Can you add a link to design pe 11? I followed your link here and it is unavailable and will probably not be back in stock. I was trying to find out how much it costs
Hey so my embroidery machine keeps taking the extra sewing thread up in the beginning and then can’t complete the embroidery. Any reason why this happens?
Investing $1000 dollars in something that will make you money is not expensive. A lot of people don’t talk about the software because there are a lot of different softwares and all the good ones cost. Nothing good is inexpensive. If you look at it from a business perspective it’s not really expensive. You have to invest in what you do unless it’s just a hobby and your just playing around. If that’s the case it’s not worth it. All the softwares are somewhat complicated to use. There is a large learning curve and the skill is worth paying for to be taught if your not willing to teach yourself.
How can I download different fonts? It shows on my usb when I plug it in to my laptop but when putting it in the machine the file doesn’t pop up. PLS anybody??
That happens to me sometimes. It could possibly be that as the thread is passing through it is creating small knots and when that not goes to pass threw the hole of the needle it creates tension and breaks the thread or sometime the needle. could also be that the thread is to light and thin. few different possibilities for this issue.
Bro we gotta communicate a little bit better. You purchased your embroidery file from where? What is the file format? If its not a .pes it will not open on your brothers embroidery machine.
I create them myself using brother pe design 10. You have to either buy a digitizing software or get Simone like myself to digitize your image for you. You can contact me at adubbproductions@gmail.com and send me an image and if i can do it we can talk about the price. Thanks for watching.
In my opinion the black lettering does not look great. It is not something I would want to sell. But that is not on you, it's the limitations of the machine.
seancena76 Part of it is in me. I’m still learning. I’ll get it right eventually? The machine does have limitations though. I appreciate your feedback.
The designs always come out beautifully as you make it feel so simple.
Vicky J-Lewis Thank you Vicky. 🙏🏾 I appreciate that.
Do you have a video on what embroidery softwares you reccomend to create your own designs? (Especially for beginners)
Im looking for the same info. Please let me kno if u find anything out
@@6ixfoa theres PE design 10 on ebay for couple of bucks
@@cashrko It's a finesse! I paid $10 and got ghosted
@@Basedgodfrey did you check the email linked to your eBay ? Cause I actually bought the software twice on eBay for like 2-3$
😅😂 yeah download links been there since November
Thank you for the informative video. My Brother SE 600 being delivered this afternoon. I'm an experienced sewist, but haven't purchased a machine in 40+ years. Looking forward to all the new modern features, especially the automatic threading. Great job on your videos, cycling thru watching all of them. 😍😎
Awesome. 🙌🏾 woohooo. Run it yup. Thank you and congrats on your new unit. You are going to live it. It’s a little monster.
RTH reasontohate entertainment. We on the map. Adubb you did a Awesome job Bro. Big Thanks from the team
I appreciate you. Any questions just reach out. 🙏🏾. Always appreciate the business. Thanks a million.
Omg...you are so awesome... I love how you explain every step.. thank you.
I love these videos and really have learned a lot from you..
Thank you.
I love my machine. I’m so anxious for learn everything 😁
I know the feeling. 👍🏾
Can you do a video on maximum sized projects ??💯
Do you have a video showing how to take ya personal designs off ya computer and put on flash drive then put on to the embroidery machine
You have to digitize your image then put on a flash drive to the machine. ruclips.net/video/uaS5N4vEBPU/видео.html
@@adubbproductions thanks
my mom owns Baby Locks and apparently they're the best you can buy, but hers always broke the needle, the needle fell out, etc. So watching your videos, I decided on buying the Brother SE600 (mom said that Brother is the cheaper Baby Lock?) and I'm paranoid to embroider with it because of the issues with the Baby Lock machines lol. I was sewing a little bit with it which of course works just fine. I've also been looking into Masterworks 3 but holy crap is that an expensive program!
The brothers machines are really economical when getting started. I have never used baby locks so I don’t have an opinion. Having my machine for over a year and a half now i have only broken 2 needles. Both broke when I was a beginner and I was trying to do things that the machine wasn’t made to do. A needle break is probably inevitable as they get old but the se600 is a solid machine and will last from my experience. You can’t go wrong.
I appreciate it 💯 I like it hands down u did a Very good job on this it turnt out very good I’m happy and I will be doing more business with u soon thanks
Thank you. I appreciate it. I always try to give the same quality i would want if i were in their shoes.
Man I wish I had an embroidering machine.
Thanks for making my brothers vision come to life!
@Young Za RTH Entertainment. Let's get to it
Your welcome. I appreciate you. Thanks for watching. Don’t forget to subscribe to the channel. 🙏🏾
Does the machine automatically stop after it’s done embroidering the first color or do you have to stop it or do something before to stop it?
Wow
What's a great starter thread kit? What do you recommend on buying my first thread pack?
So do you now hand sew the patch to whatever you want to put it on or what do you do with it?
Hi, you are the best! so happy I found you : ) It is the same way to upoad your own design on a PE550D ?
Do you have any videos for using repositional hoops for the SE600. This machine is limited to 4x4 and if you want to do a 5x7 youll need software to edit your design, right?
🔥 nice
is this machine able to work with denim
i have a lb5000, so im just beginning to explore my embroidery possibilites, your videos are very helpful thank you!! not sure if you mentioned it but what brand thread do you use to embrioder?
I just bought one what software do you use to digitize
Wassup Allan, Great Content!! I have a question tho! Does the colour of the thread have to match the colour of the bobbin thread???
From his videos it does not have to match but he uses white for bobbin
@@dslafacionttdonnacooper1482 thank you🙏🏿
Is there a video to get your design on the memory card
Yes. Sure do. After your design is digitized this is what you do. ruclips.net/video/aAWjjnxkOe0/видео.html
I am Gavin problems to make the actual size to embroider my own design, how can I a-range the size?
What hoop size do you have do you know if the se600 can be bigger than 4x4
How do you make your embroidery full! Mine looks patchy
Increase the density of the design in your digitizing software.
@@adubbproductions awesome thank you!
@@adubbproductions which program do you use? I use SewArt and can’t find it on there
I'm looking into getting this to replace my older sewing machine that finally kicked the bucket. I do a lot of plushie work as well as general sewing and having something that can do embroidering would def help with the whole plushie works, for doing eyes and what not.
My only issue is I cant find much information on the software to make your own patterns outside people in the amizon reviews saying its like $1k+ or whatnot? Or that you can only buy patterns from the website? I seen some videos on PE-Design 10 but its been discontinued and I haven't found any sort of info on what is used now.
This so far is the only machine in my budget that also does embroidering but if what's needed to make my own patterns for my plushies (so I can stop using plastic eyes) is going to be a pain. I may have to go for something else, or a basic sewing machine.
So any info on this? What is needed?
how did you add your own designs into the brother machine did you need a certain software and usb?
Will this machine allow you to do several patches within a 4 x4 size? What is the smallest patch it will make?
What software would you recommend for Mac users for digitizing files?
Chroma Luxe by Ricoma
shop.ricoma.com?referral=allan-wade
Where can I buy some of the things your using? Love your videos!!
Use my amazon link in the description of the video for the stuff I’m using. Go to www.allanawade.com for designs.
Also what digitizer software do you use? I’ve been having issues with my design coming out not so crispy. Not sure why I tried adjusting the tension but it didn’t help much.
I use Chroma Luxe from Ricoma. If you are interested here is my affiliate link to check it out. Ricoma SHOP link
shop.ricoma.com?referral=allan-wade
Also. Who digitized the file you are embroidering? It could be a bad digitization.
@@adubbproductions since it’s a custom design I used Sewart to digitize it myself. Would I be able to custom a design on Chroma luxe?
Just received my machine. Do you have to make a path first in order to do the embroidery?? I thought you could just put your shirt under the presser foot in order to do the design.
i wana make a design but idk what to used to make that design i’m a beginner can you help pleases
Can you please tell me which usb is the best to use with my PE800?
Hi,
when I am trying to put my own design into the machine it says the size is to big, so I fix the size but now its to small like a small dot.
my original design is made in illustrator, how can do the right size? and where can I fix that or how?
is that possible I can send you the design and can you fix the size?
I been having a hard time embroidering Direct to garment do you have any tips or up in coming video?
Here is you dtg video. ruclips.net/video/KyuB1Hhe5PY/видео.html
Since this video is a few years old, I'd like to ask how this machine has held up and if you'd still recommend purchasing it.
This machine doesn’t die. It’s still running.
Hey brother what software do you put designs in before embroidering to get them so clean?
So I’m new to embroidering and have broken 3 needles and it keeps nesting on the bottom. I’ve messed with the tension and have used different colors bobbin and top tread so I can see what It’s doing but once I put in the design I need it starts to nest and then my needle breaks. Is it the design? How do I fix my issue? (Using Se600)
Jennifer Barrios 1. You might not have the embroidery foot in. Do you have the sewing foot on or the embroidery foot (hoop looking thing)?
2. Do you have the embroidery base on that turns your machine from sewing time embroidering?
3. If you have on the right foot and right bad that transforms your machine the needle shouldn’t brake. The nesting is most likely caused because you don’t have your marching threaded correctly. I have a video on that.
Try this video. ruclips.net/video/N0yPILKhHVc/видео.html
Okay I’ll try that video, I thought maybe it was tension issue. But I have the embroidery base part on and the embroidery foot on. I threaded it like I do for regular sewing. I’ll check out the other video and see if maybe it’s that.
Jennifer Barrios it is the tension. It’s the tension wheels on the inside of the machine. You don’t have to adjust the tension manually. You have to thread the machine right. Release the tension on the wheels by raising up the lever. Thread it then put the lever down (which puts the tension back on) use the thing on the side to put the thread in the needle then out the lever back up and prepare to embroider. The lever applies and takes off tension on the wheels inside the machine thread it while the tension is on and get bird nesting.
Just got the brother se600 as a gift & it is tearing through the stabilizers as I try to embroider. Can you please help me.
Dubb I purchased the se600 on Amazon won't get it till Feburary . I wanted to know does the 12 by 5 embroidery hoop fit this machine
Do you have a video how to download designs to the usb stick for dummies, because I can't understand how to do it? I have tried to for weeks and no luck.
joann jumper Are the designs you have .pes files?
@@adubbproductions , yes, se600 , same as yours
joann jumper you might not be having any luck because your designs are not in the correct format. If you need .pes files to practice with go to my website. I have a bunch of them iou can download for $1 each. Or you can purchase a preloaded memory stick with over 30 designs already on it from my website. www.allanawade.com
@@adubbproductions Okay, Thanks. I will do just that.
When I am creating the design on my computer, what is the correct size that I should use on the software?
As long as the design is under 4" in height and 4" in width you should be fine.
What size needle do you use?
75/11 the standard.
what program do you use to make your embroidery designs? I can't even spell love on mine lmao It's discouraging having a machine you can't figure out how to use. Thank you in advance
Can u do hats at the BROTHER SE600
Non structured hats yes. ruclips.net/video/g9m8nwNzal8/видео.htmlsi=wzbLGRq3nQQKVlkm
Is there a delivery to Saudi Arabia?
Are you embroidering any of your flat bills on this machine?? If so, how’s it handling it?
How do you resize your image? My images are really small. I want to fill the entire area.
That can only be done in the embroidery software. All the elements in the image would have to be adjusted.
Is there a way we can send you a logo to have you make it into a stitch file??
Jessica Lady J
sure send it to my e mail. E-mail me. adubbproductions@gmail.com
i looked up the app brother pe 10 but it says it's discontinued
What file type is SE600??? I’ve tried PES and DST
.pes is the format for the se600. Where did you get your .pes file from?
What’s up A-Dubb. Idk if you’d be willing, but can you show how to embroider on Denim Jeans or anytime of pants 🤷🏾♂️
Yes. I’ll make a video on denim soon.
Hi, I in the research phase of my Tshirt/hoodie business and was wondering if you recommended embroidery or HTV. I know HTV is probably easier but I’m not trying to take shortcuts and really want to invest in my business. Any thoughts
I would recommend both. Clearly. Lol
Dope shit man🔥 How can I transfer designs from my iPad?
I’m not sure that you can. If you it out let me know.
i clicked on your link for the pe design 10 software on amazon and it says unavailable
Thank you, I appreciate you trying to use the link. I use Chroma Luxe now. It’s a far better software in my opinion that’s why i switched. If you wanna look into it here is my affiliate link for that. R icoma SHOP link
shop.ricoma.com?referral=allan-wade
Do you know of any software for mac that you can make your own custom designs? also, any that convert into a pes file?
I use photoshop and illustrator.
You need embroidery software to create .pes files brother Pe Design 10 or embrilliance or hatch are a few programs.
Thanks so much!
What would you suggest I use? Cause hatch is way more pricey as opposed to embrilliance.
Hi, Can we use any usb?
I believe the usb has to be 16gb or less. I’ve used others but do. It take my word for it. Look at what the manufacturer suggests to be certain.
Can you add a link to design pe 11? I followed your link here and it is unavailable and will probably not be back in stock. I was trying to find out how much it costs
Hey so my embroidery machine keeps taking the extra sewing thread up in the beginning and then can’t complete the embroidery. Any reason why this happens?
Taking the extra sewing thread up in the beginning? Like sewing it into the design??
@@adubbproductions I figured it out! I never changed the original footer, so it screwed the whole thing up. Thank you!
Leah Doty oh ok. Had the sewing foot on instead of the embroidery foot. Ok. Cool. Thanks for sharing. Easy to make that mistake.
But, but, how come nobody talks about the software that is needed in order to do one's own design. It's expensive
Investing $1000 dollars in something that will make you money is not expensive. A lot of people don’t talk about the software because there are a lot of different softwares and all the good ones cost. Nothing good is inexpensive. If you look at it from a business perspective it’s not really expensive. You have to invest in what you do unless it’s just a hobby and your just playing around. If that’s the case it’s not worth it. All the softwares are somewhat complicated to use. There is a large learning curve and the skill is worth paying for to be taught if your not willing to teach yourself.
Try Inkscape they have an extension you can download called InkStitch. It’s also completely free
How can I download different fonts? It shows on my usb when I plug it in to my laptop but when putting it in the machine the file doesn’t pop up. PLS anybody??
I made a video on how to add new fonts to your computer. Here it is ruclips.net/video/QXfDopcPpwY/видео.html
I HAVE A QUESTION WHAT DO YOU USE TO GET YOUR HATS TO STICK TO YOUR HATS
My thread keeps cutting in the middle of me trying to embroider , do you know what I’m doing wrong ?
That happens to me sometimes. It could possibly be that as the thread is passing through it is creating small knots and when that not goes to pass threw the hole of the needle it creates tension and breaks the thread or sometime the needle. could also be that the thread is to light and thin. few different possibilities for this issue.
I buy my embroidery but the the design don’t wanna show up
Bro we gotta communicate a little bit better. You purchased your embroidery file from where? What is the file format?
If its not a .pes it will not open on your brothers embroidery machine.
How do I fix or get rid of the gaps? I get gaps or spacing when I do designs.
I have an entire video explaining it. Here you are. ruclips.net/video/t1mmBcuBDds/видео.html
I got to learn how to download from MacBook to usb😕😕
I got you. ruclips.net/video/aAWjjnxkOe0/видео.html
@@adubbproductions thanks
What’s going on? Snow. It’s snowing here so it must be snowing there.
No snow here yet. I’m sure it’s coming though. I can feel it in the air.
Around 9:30 this morning it was colder than a witch’s tit in a brass bra. Two hours later the ground was covered in snow.
Where do you go to be able to create your own design?
I create them myself using brother pe design 10. You have to either buy a digitizing software or get Simone like myself to digitize your image for you. You can contact me at adubbproductions@gmail.com and send me an image and if i can do it we can talk about the price. Thanks for watching.
Bruh how to set a usb on embroidery machine
www.allanawade.com buy a pre loaded usb with embroidery files on it.
$1,395.00 for the software!
you need the software to embroider?
In my opinion the black lettering does not look great. It is not something I would want to sell. But that is not on you, it's the limitations of the machine.
seancena76 Part of it is in me. I’m still learning. I’ll get it right eventually? The machine does have limitations though. I appreciate your feedback.
I dm you on ig I needed more help lol
I problem. I think I replied. I just caught up on all my messages. Thanks for reaching out Shaniqua.