@@Sewinggold Thank you for the reply. Yes there are no number on dial. But the stitch can be used as reference i.e if thread tension is low then the stitch on fabric looks like this. And if tension is high then stitch would be like this. Thanks
Спасибо, за подробности, на работе сижу за такой машинкой, очень сложно заправлять эту вторую нить 🧵 особенно под лапкой, сложный трюк получается, не могу сразу попасть в дырочку косую, хоть бы придумали какие нибудь маленькие крючочки, чтоб легко было вдеть нитку в дырочку😂
Must you thread in this particular order? For instance, if one of your threads break do you need to pull the needle threads out and start again with the lower looper first?
It is not smaller, just submerged in the table. The MO-6814 we are threading in the video installs in a similar table and is almost the same size. The model to the right is an MO-6716S FF660H. It is a heavy duty, 5 thread serger. The link is below. sewinggold.com/product/juki-mo-6716s-ff6-60h/
@@Sewinggold Please tell me if I need to process side seams on jeans, will this machine be able to do that? Also tell me, I live in Kyrgyzstan, Bishkek city. Is delivery to Bishkek possible?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Your guide has been great, always supporting you
Thank you!
Excellent straightforward video. Nice and short 👌
Glad you liked it!
Please do a video on thread tension settings.
That is not really possible. There are no numbers on the tension dials to reference.
@@Sewinggold Thank you for the reply.
Yes there are no number on dial. But the stitch can be used as reference i.e if thread tension is low then the stitch on fabric looks like this. And if tension is high then stitch would be like this.
Thanks
Great video but I’m surprised any of these are sold. What a bloomin nightmare
I started to learn how to thread this tonight at my job. This is super helpful! I'm gonna get some tweezers tomorrow and I'll be unstoppable! 😮
This video saved my life…. Thank you so much guys sin lo máximo 😍🙏
Happy to hear that.
So we start by threading the lower looper not with the upper looper like the domestic ones ?
Thank you, Steve! This is exactly what I needed :)
The dials, is that set for knit fabric? I can’t figure out the correct settings
Hi, do you have a video on the thread spool. The set up?
Could you do a video on where to find the tension adjustment nut on the 6814s, the manual is not very clear. Thank you
Hi , does this machine do a rolled hem ? Thanks
Great tutorial. Thank you.
Спасибо, за подробности, на работе сижу за такой машинкой, очень сложно заправлять эту вторую нить 🧵 особенно под лапкой, сложный трюк получается, не могу сразу попасть в дырочку косую, хоть бы придумали какие нибудь маленькие крючочки, чтоб легко было вдеть нитку в дырочку😂
Must you thread in this particular order? For instance, if one of your threads break do you need to pull the needle threads out and start again with the lower looper first?
If a looper thread breaks, you should remove the thread from the needles. Just the eye of the needle.
Hello
Just used my Mo6814s for the first time and it’s going in reverse any help to fix this would be greatly appreciated thank you
Thank you very much! It is so helpful 😊
Would you mind sharing what size needle and thread are you using? I fear I might be using the wrong sizes for this machine.
The machine uses DC27 or B27 needles. You can use size 9 to 16.
Bhi jaki 757f machine ka dhaga kis Tara dahlna ha
Thanks Steve!
You are most welcome.
Hello Steve
In your video, there is another overlock on the right, it is much smaller, please tell me, can you buy such a car in your store?
It is not smaller, just submerged in the table. The MO-6814 we are threading in the video installs in a similar table and is almost the same size. The model to the right is an MO-6716S FF660H. It is a heavy duty, 5 thread serger. The link is below.
sewinggold.com/product/juki-mo-6716s-ff6-60h/
@@Sewinggold Please tell me if I need to process side seams on jeans, will this machine be able to do that? Also tell me, I live in Kyrgyzstan, Bishkek city. Is delivery to Bishkek possible?
How much
Thanks so much ❤
How to install needles
Does this machine do rolled hem too. I have 5 threads.
You can do a standard 3 thread with your MO-6816S, not a rolled hem. The Juki MO-6804S-0A4-150 and MO-6704DA-0A4-150 are made for rolled hem.
How much those machines are?
How much price for jhukki
I want this kind of juki machine help Guyz how a l can get it?
Here is the link on our website: sewinggold.com/product/juki-mo-6816s/
thank❤
Thankes
Praise kitani hai
Thank you
You're welcome
Very nice
Price
muchas gracias :)
You are most welcome.
Super 👍
great video. thanks
You are most welcome.
Thanks
You are welcome.
How much
Currently $1450 plus $135 shipping.
sir i do this work
i am the master of this job
please give me work
A little more narration would have been nice
Super
Thanks